18 inch Tyvek 400 sleeves with elastic TY500SWH from Dupont, sold by box of 100 pairs.

White Tyvek® 400 sleeves with elastic TY500SWH from DuPont, 18 inches

The DuPont™ Tyvek® 400 (TY500SWH) sleeves give your arms reliable, comfortable protection over their full 18-inch length. Designed to resist dry particles and light splashes, they form an effective barrier while staying light and flexible. Their elastic at both ends ensures a secure fit and seamless integration with your gloves and coverall. Ideal for industrial environments and dirty work, they are sold by the box of 100 pairs. Manufacturer code : TY500SWH.

Tyvek® 400 fabric of the TY500SWH sleeves

Tyvek® 400, made of flash-spun high-density polyethylene, is a unique DuPont fabric, resistant to penetration and highly effective at repelling most airborne particles. It acts as a barrier against fine particles and light liquids while letting heat and water vapour pass through for better comfort. Strong and lightweight, it resists abrasion, puncture and tearing.

Features of the elastic Tyvek 400 sleeves TY500SWH

These sleeves stand out for protecting without compromising comfort or mobility. Their robust yet lightweight material allows extended use without discomfort. Thanks to their elastic at both ends, they fit the arm and wrist perfectly, preventing any slipping and ensuring optimal forearm coverage. Their design limits snagging risks and improves durability.

Applications of the disposable Tyvek 400 sleeves in industrial settings

The TY500SWH sleeves protect the forearms where the coverall is not enough : asbestos abatement, painting and spraying, handling of powders and pigments, industrial maintenance, food processing and cleaning. They complete gloves and coverall for continuous protection from wrist to above the elbow, in any task where a disposable barrier against particles and splashes is required.

Restrictions of the Tyvek 400 sleeves TY500SWH

These sleeves do not protect against aggressive liquid chemicals, pressurized sprays or gases. They are not flame-resistant, do not protect against cuts and must not be used near flame or intense heat. They are a mainly disposable item.

Maintenance and use of the disposable Tyvek 400 sleeves

The Tyvek® 400 sleeves are mainly single-use : replace them as soon as they are soiled, torn or contaminated, and dispose of them according to applicable regulations (notably for asbestos waste). Store them dry, away from light and heat, in their original packaging.

FAQ about the elastic Tyvek 400 sleeves TY500SWH

How long are these sleeves ?

They are 18 inches long and cover the forearm up to above the elbow.

How are they sold ?

By the box of 100 pairs. DuPont™ manufacturer code : TY500SWH.

Do they have elastic ?

Yes. They have elastic at both ends for a secure fit on the arm and wrist.

Are they suitable for asbestos abatement ?

Yes. Tyvek® 400 is commonly used for asbestos abatement and hazardous dust removal. They must be disposed of according to applicable regulations.

Do they protect against cuts or chemicals ?

No. They resist particles and light splashes, but not cuts or aggressive chemicals. For cut protection, see the cut-resistant sleeves.

Complementary suggestions for your Tyvek 400 sleeves

To complete your arm protection, first see the white polyethylene sleeve 18 in (VS19) and its blue version (VS20) for lighter use, as well as the economical PVC sleeve (VS25) for liquids.

Under « Accessories » at the bottom of the page, complete your equipment with the level 3 cut-resistant sleeves (VS21), the canvas cotton sleeves (VS24), the SureKnit sleeves (VSLSXB18MC) and the Cutban cut-resistant sleeves (VSKPW14TH).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.