- New
This item is not kept in stock. Please allow 5 days for delivery.
White floor marking tape to lay out warehouse aisles, forklift lanes and 5S zones, available in 100 ft rolls in a 2 in or 4 in width. Made of 0.050 in (50 mil) PVC with colour through its full thickness, it resists abrasion, chemical exposure and industrial wear. Its beveled edges reduce the impact of wheels, and its high-tack adhesive bonds to clean, dry, smooth floors.
This item is not kept in stock. Please allow 5 days for delivery.
Available widths: 2 in and 4 in, 100 ft roll
Available in 2 widths. Select the variant you need from the drop-down menu.
| Sylprotec code | Width | Length | Weight |
|---|---|---|---|
| ECTHDBC-2 | 2 in (5.08 cm) | 100 ft (30.48 m) | 6 lb (2.72 kg) |
| ECTHDBC-4 | 4 in (10.16 cm) | 100 ft (30.48 m) | 11 lb (4.99 kg) |
The dimensions shown are for variant ECTHDBC-2.
This white floor tape lays out aisles, forklift lanes, pallet zones and 5S areas in warehouses, factories and distribution centres. It is made of 0.050 in (50 mil) PVC with the colour running through its full thickness. Its beveled edges reduce the impact of forklift, pallet jack and floor scrubber wheels, and its high-tack rubber-based adhesive bonds to most clean, dry, smooth floors. The 100 ft (30.48 m) roll comes in a 2 in (5.08 cm) or 4 in (10.16 cm) width. It is made in the United States.
The manufacturer recommends it for warehouse aisle and lane marking, sorting, staging and workflow layouts for 5S and Lean systems, forklift and pallet zone identification, and heavy-use industrial facilities. A solid colour lays out aisles and separates work areas. The 2 in width suits secondary aisles and narrower areas; the 4 in width suits forklift lanes and main aisles, where the line must be seen from a distance. This page carries white only. The same series comes on sister pages: the yellow roll (ECTHDJA), the blue strip (ECTHDBL), the red variant (ECTHDRG), the green version (ECTHDVE), the black model (ECTHDNO) and the red/white striped product (ECTHDRB), each in 2 and 4 in, as well as the yellow/black striped option (ECTHDJN), in 2, 3 and 4 in.
| Feature | Detail |
|---|---|
| Colour | White |
| Material | PVC with colour through its full thickness |
| Thickness | 0.050 in (50 mil, 1.27 mm) |
| Widths | 2 in (5.08 cm) or 4 in (10.16 cm) |
| Length | 100 ft (30.48 m) per roll |
| Edges | Beveled |
| Adhesive | Rubber-based, high tack, heavy coat weight |
| Application surface | Clean, dry, smooth floor |
| Country of origin | United States |
| Sold by | Roll |
Sweep and clean the floor, then let it dry. Mark the line if needed, unroll the tape along the layout, cut it to length and press it firmly across its full width, right to the edges. Sweep aisles regularly to keep the marking visible, and replace any section with a lifting edge or too worn. When the layout changes, the tape removes cleanly from most surfaces with minimal adhesive residue.
The 2 in suits secondary aisles and narrower areas. The 4 in is seen from farther away, which suits forklift lanes and large aisles. Also follow the marking rules of your facility.
Follow your facility's colour code. This page carries a single colour; the others are on their sister pages, listed in the applications section.
Yes. The manufacturer designs it for heavy traffic: its beveled edges reduce the impact of forklift, pallet jack and floor scrubber wheels, and its 0.050 in PVC resists abrasion and wear.
Most clean, dry, smooth floors. Clean and dry the surface before application for good adhesion.
Yes. It removes cleanly from most surfaces with minimal adhesive residue.
For the supervisor who marks off work areas on their knees in a plant, plan for the Milwaukee (VG107) 48-73-6051 gel knee pads, the Kevlar (GS18KGFN) blended-knit cut-resistant gloves, touchscreen friendly, the 3M (YASF401) SF401 SecureFit safety glasses, the Pioneer (V6693) 6693 high-visibility yellow surveyor's vest with 16 pockets and the Laser Lite (OA1101) uncorded disposable earplugs.
Three useful additions for floor marking are: red and white self-adhesive warning tape (ECT750R), 54 ft magenta and yellow Brady marking tape (ECT747-X) and No pedestrian access sign (ECI200). Select them according to the layout and hazards present.
Data sheet
Specific References
You might also like