Kleton steel racking aisle protector, safety yellow

Kleton steel racking aisle protector, safety yellow

Manufacturer code KLETON: RN063, model RN063

This item is not kept in stock. Please allow 15 days for delivery.

Available in 5 configurations. Select the variant you need from the drop-down menu.

The Kleton aisle protector prevents racking damage caused by forklifts, pallet jacks and other vehicles. Its 16 in high wrap-around corners sit on a 5 x 3 x 1/4 in angle drilled with holes for floor anchoring (anchors not included). The steel construction is fully welded and painted safety yellow. It is offered in a double or single version, left or right, for 42 or 48 in uprights; the single models are used for back-to-back installations and are designed for 12 in between racks.

Features: Kleton steel racking aisle protector

• Steel, all-welded construction
• 16 in high wrap-around corners
• 5 x 3 x 1/4 in angle with floor anchoring holes (anchors not included)
• Single left, single right or double, for 42 or 48 in uprights
• Safety yellow, 1-year limited warranty

Applications: Kleton steel racking aisle protector

Anchored at the end of racking aisles in warehouses and distribution centres, it protects uprights from impacts by forklifts, pallet jacks and other vehicles turning around the aisle. The single versions suit back-to-back rows installed with 12 in between racks.

Care: Kleton steel racking aisle protector

Inspect the protector and the uprights after any impact. Retighten the anchors as needed, touch up paint on bare steel and replace the protector if it is bent.

FAQ: Kleton steel racking aisle protector

Which configuration should I choose: single or double?

The single models, left or right, are designed for back-to-back installations with 12 in between racks. The double model is offered for 42 in uprights (47 in long) or 48 in uprights (53 in long).

Which length matches my uprights?

42 in upright: 50 in single left or right, 47 in double. 48 in upright: 56 in single right, 53 in double. Height is 16 in in all cases.

Are floor anchors supplied?

No. The angle is drilled for floor anchoring, but the anchors are not included.

How much does the protector weigh?

From 38 to 49 lb: 38 lb for the 42 in single models, 41 lb for the 48 in single, 46 lb for the 42 in double and 49 lb for the 48 in double.

Where is the protector made and what is the warranty?

It is made in Canada and covered by a 1-year limited warranty.

Suggestions for this product

For the racking installer anchoring this Kleton protector at the end of an aisle still open to traffic, plan for a Pioneer yellow vest (V489) with mesh complement to stay visible, TenActiv gloves (GS13TAFNT) coated with foam nitrile for a sure grip on the angle, Cee-Tec safety glasses (YA12E93101DX) with foam seal that block drilling dust, a 3M behind-the-head earmuff (OPH10B) while drilling and a 3M mask (R8210) against concrete dust.

To steer forklifts away during the work, set out an orange reflective traffic cone (EPTCONE28B) and a full-dome convex mirror (M86) where aisles cross. In this same lot, add the Kleton rack upright (EBKH858) protector mid-row, the Kleton floor angle (EBRN065-48) guard along walls and the yellow Eagle column (PC1708) protector around building posts.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.