compare_arrows

Justrite KDD161 double-pole circuit breaker lockout

Reference : CACKDD161
$47.05

This item is not stocked: allow 5 to 7 days for delivery.

Red and black Justrite KDD161 double-pole circuit breaker lockout from the STOPOUT series, for 120/240 V breakers. At 1 3/4 in wide, it covers the handle of a two-pole breaker; it is 3 1/3 in long and 1 1/2 in deep. Its ratcheting metal jaws with a quick-release tab can go on with one hand, an advantage when the other hand is already holding the padlock. It takes one padlock with a shackle up to 9/32 in diameter. Instructions included. Sold individually, padlock not included.

Quantity

Compare

Justrite KDD161 double-pole circuit breaker lockout

Justrite model: KDD161.

This item is not stocked: allow 5 to 7 days for delivery.

A two-pole breaker calls for a wider lockout than a single-pole one. This 1 3/4 in wide STOPOUT model covers the handle of a two-pole 120/240 V breaker and uses the same ratcheting metal jaws as the rest of the series. For one pole, see the single-pole lockout (CACKDD160), 15/16 in wide; for three poles, the triple-pole KDD162 (CACKDD162), 2 1/2 in wide.

Features of the CKDD161 lockout

  • Ratcheting metal jaws with quick-release tab.
  • One-handed installation possible.
  • STOPOUT series, double-pole format for 120/240 V breakers.
  • 1 3/4 in wide, to cover the handle of a two-pole breaker.
  • Takes one padlock with a shackle up to 9/32 in diameter.
  • Plastic and metal, red and black.
  • Instructions included.
FeatureDetail
ManufacturerJustrite
ModelKDD161
SeriesSTOPOUT®
MaterialsPlastic and metal
Number of padlocks1
Number of poles2 (double-pole)
Breaker voltage120/240 V
MechanismRatcheting metal jaws
Width1 3/4 in (4.45 cm)
Length3 1/3 in (8.47 cm)
Depth1 1/2 in (3.81 cm)
Padlock shackleUp to 9/32 in (7.14 mm) diameter
Packaged dimensions4.3 X 2 X 2.8 in
Weight0.144 lb (0.065 kg)
IncludesInstructions
ColourRed and black
Sold byUnit
Country of originChina

Metal jaws and padlock fit for the 2-pole STOPOUT

The CKDD161 belongs to the pump-action STOPOUT family for 120/240 V circuit breakers. This version is intended for a 2-pole breaker handle and has a width of 1 3/4 in. The one-, two- and three-pole versions should therefore not be treated as a single interchangeable size. The pump-action mechanism brings the metal jaws together to secure the lockout, with one-handed installation possible. For removal, the quick-release tab is used after the padlock has been taken off. The maximum padlock shackle diameter is 9/32 in, approximately 7.1 mm. This limit refers to the shackle, not to the overall width of the padlock body. Check the shape and pole count of the handle before installation: the 120/240 V designation alone does not describe the breaker’s physical geometry. Keep the instructions with the device so that the installation and removal sequence for this specific family remains available to the workers who use it.

Applications: pole-specific circuit breakers

The KDD161 is for electricians and maintenance crews who must keep a two-pole breaker open during the work. Follow the facility's written lockout program and the instructions provided.

Maintenance of the CKDD161 locking mechanism

Wipe the lockout after use. Check the ratchet and tab before each use; replace the lockout if damaged.

FAQ: electrical lockout selection

What type of breaker is it for?

Double-pole 120/240 V circuit breakers: its 1 3/4 in width covers the handle of a two-pole breaker.

What are its dimensions?

1 3/4 in (4.45 cm) wide, 3 1/3 in long and 1 1/2 in deep.

Can it be installed with one hand?

Yes. One-handed installation is possible.

Is the padlock included?

No. The lockout is sold individually with its instructions, without padlock.

What is the delivery time?

This item is not stocked: allow 5 to 7 days for delivery.

Equipment suggestions for the CKDD161 lockout

For the electrical maintenance crew, plan according to the risks of the job for Jackson Safety Nemesis safety glasses (YA3297) with a clear lens, Endura cowhide driver's gloves (G404) with snug cuffs, an MSA V-Gard class E hardhat (TA80), 3M Push-Ins earplugs (OA1000) and an orange Pioneer FR-Tech flame-resistant arc-rated vest (V7728).

To complete the lockout equipment, consider the padlock (CA1XKD1) with a different key for individual lockout; add the tags (CAET9) to indicate that operation is prohibited. For other needs at the workstation, the lockout (CAC2) for other compatible double-pole miniature ISO/DIN breakers provides a complementary option to select according to the equipment concerned.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

CACKDD161

Data sheet

Product group
Safety equipment
Main category
Industrial accessories
Sub category
Locking and lockout
Name of the product
Circuit breaker lock
Series of products
STOPOUT®
Product code
CACKDD161
Sort by keywords
Circuit-breaker locks
Product use
Locking energy-isolating devices during lockout
Manufacturer
Justrite
Country of origin
China
Features
Double-pole circuit breaker (2 poles)
Additional Features
Ratchet lockout
Characteristic adding safety
Can be applied with one hand
Includes
Instructions
Material1
Plastic
Material2
Metal
Length (in/cm)
3.33 in / 8.46 cm
Width (in/cm)
1.75 in / 4.44 cm
Height (in/cm)
1.5 in / 3.81 cm
Weight (lb/kg)
0.139 lb / 0.063 kg
Sold by
Unit
Color
Red/Black
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Compatible padlocks
1 padlock; maximum 9/32 in shackle

Specific References

MPN
KDD161

Download

You might also like

Comments (0)
No customer reviews for the moment.