compare_arrows

Justrite KDD160 single-pole circuit breaker lockout

Reference : CACKDD160
$39.15

This item is not stocked: allow 5 to 7 days for delivery.

Red and black Justrite KDD160 single-pole circuit breaker lockout from the STOPOUT series, for 120/240 V breakers. At 15/16 in wide, it covers the handle of a one-pole breaker; it is 3 1/3 in long and 1 1/2 in deep. Its ratcheting metal jaws and quick-release tab are easy to handle, and installation can be done with one hand. It takes one padlock with a shackle up to 9/32 in diameter. Double- and triple-pole formats are also offered. Instructions included. Sold individually, padlock not included.

Quantity

Compare

Justrite KDD160 single-pole circuit breaker lockout

Justrite model: KDD160.

This item is not stocked: allow 5 to 7 days for delivery.

To prevent a circuit breaker from being reset during a job, this STOPOUT lockout can be applied with one hand and removed with its quick-release tab. This single-pole format, 15/16 in wide, covers the handle of a one-pole 120/240 V breaker. For two or three poles, see the double-pole lockout (CACKDD161), 1 3/4 in wide, or the triple-pole KDD162 (CACKDD162), 2 1/2 in wide.

Features of the CKDD160 lockout

  • Ratcheting metal jaws with quick-release tab.
  • One-handed installation possible.
  • STOPOUT series, single-pole format for 120/240 V breakers.
  • 15/16 in wide, to cover the handle of a one-pole breaker.
  • Takes one padlock with a shackle up to 9/32 in diameter.
  • Plastic and metal, red and black.
  • Instructions included.
FeatureDetail
ManufacturerJustrite
ModelKDD160
SeriesSTOPOUT®
MaterialsPlastic and metal
Number of padlocks1
Number of poles1 (single-pole)
Breaker voltage120/240 V
MechanismRatcheting metal jaws
Width15/16 in (2.38 cm)
Length3 1/3 in (8.47 cm)
Depth1 1/2 in (3.81 cm)
Padlock shackleUp to 9/32 in (7.14 mm) diameter
Weight0.126 lb (0.057 kg)
IncludesInstructions
ColourRed and black
Sold byUnit
Country of originChina

Metal jaws and padlock fit for the 1-pole STOPOUT

The CKDD160 belongs to the pump-action STOPOUT family for 120/240 V circuit breakers. This version is intended for a 1-pole breaker handle and has a width of 15/16 in. The one-, two- and three-pole versions should therefore not be treated as a single interchangeable size. The pump-action mechanism brings the metal jaws together to secure the lockout, with one-handed installation possible. For removal, the quick-release tab is used after the padlock has been taken off. The maximum padlock shackle diameter is 9/32 in, approximately 7.1 mm. This limit refers to the shackle, not to the overall width of the padlock body. Check the shape and pole count of the handle before installation: the 120/240 V designation alone does not describe the breaker’s physical geometry. Keep the instructions with the device so that the installation and removal sequence for this specific family remains available to the workers who use it.

Applications: pole-specific circuit breakers

The KDD160 serves electricians and maintenance crews who must keep a one-pole breaker open during work downstream. Follow the facility's written lockout program and the instructions provided.

Maintenance of the CKDD160 locking mechanism

Wipe the lockout after use. Before each use, check that the ratchet holds and that the tab works; replace the lockout if damaged.

FAQ: electrical lockout selection

What type of breaker is it for?

Single-pole 120/240 V circuit breakers: its 15/16 in width covers the handle of a one-pole breaker.

What are its dimensions?

15/16 in wide, 3 1/3 in long and 1 1/2 in deep.

Can it be installed with one hand?

Yes. One-handed installation is possible.

How is it removed?

With its quick-release tab, once the padlock is off.

Is the padlock included?

No. The lockout is sold individually with its instructions, without padlock.

Equipment suggestions for the CKDD160 lockout

For the electrician working at the panel, plan according to the risks of the job for 3M Solus safety glasses (YAS1101) with clear anti-fog lenses, TenActiv cut-resistant foam-nitrile-coated gloves (GSTXFNVB), a safety hardhat (TA83-W), Laser Lite disposable earplugs (OA1101) and a blue Pioneer flame-resistant arc-rated vest (V7730).

To complete the lockout equipment, consider the padlock (CA1C) with a cable shackle for personal lockout; add the tags (CAET11) to identify the maintenance work. For other needs at the workstation, the lockout (CAC1) for other isolation points with compatible miniature ISO/DIN breakers provides a complementary option to select according to the equipment concerned.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

CACKDD160

Data sheet

Product group
Safety equipment
Main category
Industrial accessories
Sub category
Locking and lockout
Name of the product
Circuit breaker lock
Series of products
STOPOUT®
Product code
CACKDD160
Sort by keywords
Circuit-breaker locks
Product use
Locking energy-isolating devices during lockout
Manufacturer
Justrite
Country of origin
China
Features
Single-pole circuit breaker (1 pole)
Additional Features
Ratchet lockout
Characteristic adding safety
Can be applied with one hand
Includes
Instructions
Material1
Plastic
Material2
Metal
Length (in/cm)
3.33 in / 8.46 cm
Width (in/cm)
0.94 in / 2.39 cm
Height (in/cm)
1.5 in / 3.81 cm
Weight (lb/kg)
0.124 lb / 0.056 kg
Sold by
Unit
Color
Red/Black
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Compatible padlocks
1 padlock; maximum 9/32 in shackle

Specific References

MPN
KDD160

Download

You might also like

Comments (0)
No customer reviews for the moment.