compare_arrows

Justrite KDD162 triple-pole circuit breaker lockout

Reference : CACKDD162
$49.75

This item is not stocked: allow 5 to 7 days for delivery.

Red and black Justrite KDD162 triple-pole circuit breaker lockout from the STOPOUT series, for 120/240 V breakers. At 2 1/2 in wide, the widest of the three formats in the series, it covers the handle of a three-pole breaker; it is 3 1/3 in long and 1 1/2 in deep. Its ratcheting metal jaws with a quick-release tab go on with one hand. It takes one padlock with a shackle up to 9/32 in diameter. Instructions included. Sold individually, padlock not included.

Quantity

Justrite KDD162 triple-pole circuit breaker lockout

Justrite model: KDD162.

This item is not stocked: allow 5 to 7 days for delivery.

For a three-pole 120/240 V breaker, this 2 1/2 in wide STOPOUT lockout covers the matching handle with the same ratcheting metal jaws as the other formats. For fewer poles, see the single-pole lockout (CACKDD160), 15/16 in wide, or the double-pole KDD161 (CACKDD161), 1 3/4 in wide.

Features of the CKDD162 lockout

  • Ratcheting metal jaws with quick-release tab.
  • One-handed installation possible.
  • STOPOUT series, triple-pole format for 120/240 V breakers.
  • 2 1/2 in wide, to cover the handle of a three-pole breaker.
  • Takes one padlock with a shackle up to 9/32 in diameter.
  • Plastic and metal, red and black.
  • Instructions included.
FeatureDetail
ManufacturerJustrite
ModelKDD162
SeriesSTOPOUT®
MaterialsPlastic and metal
Number of padlocks1
Number of poles3 (triple-pole)
Breaker voltage120/240 V
MechanismRatcheting metal jaws
Width2 1/2 in (6.35 cm)
Length3 1/3 in (8.47 cm)
Depth1 1/2 in (3.81 cm)
Padlock shackleUp to 9/32 in (7.14 mm) diameter
Packaged dimensions4.5 X 2 X 3 in
Weight0.152 lb (0.069 kg)
IncludesInstructions
ColourRed and black
Sold byUnit
Country of originChina

Metal jaws and padlock fit for the 3-pole STOPOUT

The CKDD162 belongs to the pump-action STOPOUT family for 120/240 V circuit breakers. This version is intended for a 3-pole breaker handle and has a width of 2 1/2 in. The one-, two- and three-pole versions should therefore not be treated as a single interchangeable size. The pump-action mechanism brings the metal jaws together to secure the lockout, with one-handed installation possible. For removal, the quick-release tab is used after the padlock has been taken off. The maximum padlock shackle diameter is 9/32 in, approximately 7.1 mm. This limit refers to the shackle, not to the overall width of the padlock body. Check the shape and pole count of the handle before installation: the 120/240 V designation alone does not describe the breaker’s physical geometry. Keep the instructions with the device so that the installation and removal sequence for this specific family remains available to the workers who use it.

Applications: pole-specific circuit breakers

The KDD162 is for electricians who must keep a three-pole breaker open during the work. Follow the facility's written lockout program and the instructions provided.

Maintenance of the CKDD162 locking mechanism

Wipe the lockout after use. Check the ratchet and tab before each use; replace the lockout if damaged.

FAQ: electrical lockout selection

What type of breaker is it for?

Triple-pole 120/240 V circuit breakers: its 2 1/2 in width covers the handle of a three-pole breaker.

What are its dimensions?

2 1/2 in (6.35 cm) wide, 3 1/3 in long and 1 1/2 in deep.

Can it be installed with one hand?

Yes. One-handed installation is possible.

Is the padlock included?

No. The lockout is sold individually with its instructions, without padlock.

What is the delivery time?

This item is not stocked: allow 5 to 7 days for delivery.

Equipment suggestions for the CKDD162 lockout

For the electrician working at the panel, plan according to the risks of the job for Uvex Ultra-Spec 2001 OTG safety glasses (YAU0112) worn over prescription eyewear, Endura Pro cut- and impact-resistant gloves (G378GKGVBE), an MSA Super V type 2 class E hardhat (TA82) with a 4-point ratchet suspension, Howard Leight corded earplugs (OA1100C) and an orange Pioneer FR-Tech flame-resistant shirt (V130).

To complete the lockout equipment, consider the padlock (CA1ARG) with a 1/4 in shackle within the lockout’s diameter limit; add the tags (CAET5) to identify the lockout. For other needs at the workstation, the device (CAC3) for other breakers whose geometry requires a different lockout provides a complementary option to select according to the equipment concerned.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

CACKDD162

Data sheet

Product group
Safety equipment
Main category
Industrial accessories
Sub category
Locking and lockout
Name of the product
Circuit breaker lock
Series of products
STOPOUT®
Product code
CACKDD162
Sort by keywords
Circuit-breaker locks
Product use
Locking energy-isolating devices during lockout
Manufacturer
Justrite
Country of origin
China
Features
Triple-pole circuit breaker (3 poles)
Additional Features
Ratchet lockout
Characteristic adding safety
Can be applied with one hand
Includes
Instructions
Material1
Plastic
Material2
Metal
Length (in/cm)
3.33 in / 8.46 cm
Width (in/cm)
2.5 in / 6.35 cm
Height (in/cm)
1.5 in / 3.81 cm
Weight (lb/kg)
0.15 lb / 0.068 kg
Sold by
Unit
Color
Red/Black
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Compatible padlocks
1 padlock; maximum 9/32 in shackle

Specific References

MPN
KDD162

Download

You might also like

Comments (0)
No customer reviews for the moment.