R6001

3M approved organic vapours cartridge for 3M half & full facepiece respirators series 6000, 7000 & FF-400. Sold in pairs.

$17.85

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

3M NIOSH 42 CFR 84 approved cartridge for protection from organic vapours. These cartridges are compatible with 3M half facepiece and full facepiece respirators series 6000, 7000 and Ultimate-FX (FF-400). Sold in pairs, 30 pairs/case.

3M 6000 series cartridges are made of active charcoal which is one of the most efficient and cost-effective method of filtering airborne contaminants on the market. 3M 6001 cartridges have been designed to protect one from organic vapours such as xylene, benzene, spray paint, pesticides and a myriad of other industrial solvents. CAUTION: 6001 cartridges don’t protect one from carbon monoxide (CO) and carbon dioxide (CO). If one has to work in an environment that may contain those two gases, one has to find another way to protect himself.

Use for:
This type of cartridge is ideal for chemical and petrochemical manufacturing, construction and transportation.

Do not use for:
Do not use on a beard and other facial hair or if the user suffers from a condition that prevents him from having direct contact with the respirator’s sides. One should never use a respirator regardless of the type of cartridge in use whenever concentrations of gases and vapours exceed 10 times the admissible limit set by the CNESST or any other regulation applicable. Avoid sandblasting and oxygen deprived environments (an atmosphere with less than 19,5 % oxygen).

Maintenance and service life:
Studies have shown that in case of contaminant mixture, all vapours are absorbed simultaneously by the granulated charcoal inside the cartridges. One must take into account the presence of a contaminant mixture since the most volatile solvent will saturate the cartridge. The cartridge service life and one’s degree of protection will then depend on the concentration and the nature of the contaminants in the air.

One may store its cartridges in an airtight bag or container since even when not in use, the cartridge absorb whatever contaminant there may be in the air.

Since this is a disposable product, there is no maintenance. The manufacturer’s limitations must be followed.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryRespiratory protection
Sub sub category3M respirators and cartridges
Name of the productCartridge
Series of productsFor 7800S, FF-400, 7000, 5000, 7500, 6500, 6000 series respirators
Product codeR6001
Approved/CertifiedMeets NIOSH
Manufacturer3M
Country of originUnited State of America
Type of connectionBayonet type connector
Maintenance freeDisposable product
Protection against gases and vaporsProtects against organic vapours
Cartridge color codeBlack
Carbon filterWith carbon filter
Material1Active charcoal
Material2Plastic
Height (in/cm)1.25 in / 3.2 cm
Length (in/cm)7.25 in / 18.4 cm
Width (in/cm)4.25 in / 10.79 cm
Weight (lb/kg)0.42 lb / 0.19 Kg
ColorGrey/Black
Sold byPair
Another packaging available160 units per case (30 pairs)
Another packaging available260 cases per pallet (3600 units-1800 pairs)
Useful life1825 Days
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Reviews

No customer reviews for the moment.

Write a review
3M approved organic vapours cartridge for 3M half & full facepiece respirators series 6000, 7000 & FF-400. Sold in pairs.

3M approved organic vapours cartridge for 3M half & full facepiece respirators series 6000, 7000 & FF-400. Sold in pairs.

Accessories

30 other products in the same category: