3M
3M 502 filter adapter to attach filters to cartridges. For single use.
R502
$9.55
3M Adapter for Bayonet Filter
The 3M adapter allows a bayonet filter to be securely attached directly onto a chemical cartridge from the 6000 series. Designed for single use, this device ensures a stable and secure connection between the components of the respiratory system. It is ideal for professionals who wish to combine gas protection with particle filtration in demanding industrial environments. Cartridges and filters are not included.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
A Practical Solution for Combining Cartridge and Bayonet Filter
This adapter is designed to allow the addition of a particulate filter onto a 3M 6000 series chemical cartridge. It offers a modular solution for work environments where risks are mixed: organic vapors, acid gases, dust, or oily aerosols. This system is particularly useful in manufacturing, industrial maintenance, chemical processing, or construction sectors.
Quick attachment solution for 6000 series cartridges.
Technical specifications of the 3M adapter for 6000 series cartridge
The adapter is made of rigid plastic and is designed for a single use. It is sold in a pack of two units, that is, one pair. It allows a bayonet filter to be attached to a chemical cartridge from the 6000 series while maintaining the integrity of the respiratory system. This device is compatible with 3M respirator masks from the 6000, 7000, 7500, FF-400, and Ultimate FX series.
Simple and Secure Installation on 3M Cartridges
To install the adapter, simply snap it onto the chemical cartridge, then attach the bayonet filter on top. This system requires no tools and allows for quick setup. It is essential to ensure that the assembly is properly locked in place to guarantee a perfect seal and optimal protection.
Maintenance and Lifespan of the Adapter
This model is designed for single use. It must not be reused once removed or exposed to contaminants. It requires no maintenance but should be handled carefully to avoid any deformation before installation.
Usage Tips for Effective Respiratory Protection
Use this adapter only with compatible cartridges and filters from the 3M range. This system is designed for environments where contaminant concentration does not exceed 10 times the permissible exposure limit, according to CNESST. It is not suitable for oxygen-deficient atmospheres or environments with high concentrations of gases or vapors.
FAQ about the 3M adapter for 6000 series cartridges
Is this device reusable?
No, it is designed for single use. It must be replaced after each use.
Is it compatible with 6500 Quick-Latch series masks?
Yes, as long as the mask uses standard bayonet connectors. It is recommended to verify compatibility with the filter used.
Can this adapter be used with all 3M bayonet filters?
It is compatible with bayonet filters designed for 3M masks, but it is essential to verify compatibility with the chemical cartridge used.
Additional suggestions for the 3M adapter for 6000 series cartridges
Do you need additional safety equipment? See the following items: N95 filter for cartridges (R5N11), P95 filter for 6000 series cartridges (R5P71), organic vapor protection cartridge (R6001), 3M acid gas cartridge (R6002), organic vapor and acid gas protection cartridge (R6003), multigas vapor cartridge (R6006).
Under “Accessories” at the bottom of the page. If you are looking for work equipment, check out the following products: Full-face respirator (R6800), half-face respirator (R6200), full-face respirator (RFF402).
R502
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Respiratory protection
- Sub sub category
- 3M respirators and cartridges
- Name of the product
- Adapter for 3M filter
- Series of products
- 3M (Tm) Respirator
- Product code
- R502
- Approved/Certified
- Meets NIOSH
- Manufacturer
- 3M (TM)
- Country of origin
- United State of America
- Maintenance free
- Discard if damaged, contaminated, dirty or worn
- Features
- The 3M adapter is compatible with the 6000 series cartridges; with the 2000 series filters and with the 7093 filter
- Type of connection
- Bayonet type connector
- Length (in/cm)
- 6 in / 15.24 cm
- Width (in/cm)
- 4 in / 10.16 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 0.7 lb / 0.3 Kg
- Sold by
- Pair
- Color
- Transparent
- Another packaging available1
- Box of 20 (10 pairs)
- Another packaging available2
- By the case of 100 units (50 pairs)
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- Cartridges and filters not included
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Customers who bought this product also bought:
3M Adapter for Bayonet Filter
The 3M adapter allows a bayonet filter to be securely attached directly onto a chemical cartridge from the 6000 series. Designed for single use, this device ensures a stable and secure connection between the components of the respiratory system. It is ideal for professionals who wish to combine gas protection with particle filtration in demanding industrial environments. Cartridges and filters are not included.