3M full-face respirators 6000 & 7000 series

3M obturator for respiratory mask: a reliable solution for demanding environments

3M Manufacturer's Code: 7000029584

Complies with NIOSH 42 CFR 84. Sold individually.

The obturator for full-face respiratory protection mask from 3M is an essential replacement part for DIN models from the 6000 and 7000 series. It blocks the central opening of the mask, preventing any contamination after use. This respiratory plug is particularly useful for professionals working in maritime, industrial, oil, gas, or mining sectors. Thanks to its robust design, it guarantees optimal protection against particles and contaminants, while facilitating the adaptation of the mask to compatible cartridges and filters.

Enhanced safety and lasting performance.

Features of the obturator plug for full-face mask 3M series 6000 and 7000:

This respiratory safety plug is designed for 3M full-face masks from the 6700PF, 6800PF, and 6900PF series. It allows the mask to be converted for use with various filters and cartridges, while ensuring a perfect seal. The obturator is also used during fit tests with Powerflow-type respirators. Its broad compatibility and ease of installation make it an indispensable accessory for professionals concerned about their respiratory safety.

Installation of the obturator for respiratory mask 3M series 6000 and 7000:

Installing the 3M obturator is simple and quick. Just position it over the intake port of the full-face mask, ensuring it is properly fitted to guarantee maximum sealing. This respiratory plug is designed to fit perfectly with DIN masks from the 6000 and 7000 series, allowing effective conversion for use with appropriate filters and cartridges.

Maintenance of the obturator plug for 3M respiratory mask:

To maintain the effectiveness of the obturator plug, it is recommended to clean it regularly with a soft cloth and a non-abrasive product. Avoid harsh solvents that could damage the plug’s structure. Frequently check the condition of the obturator: if it shows cracks or signs of wear, it must be replaced immediately to maintain optimal respiratory protection.

Usage tips for the obturator plug for 3M full-face mask:

Use this respiratory safety plug after each work session to prevent any particle infiltration into the mask. It is especially recommended in high-risk contamination environments. Make sure the plug is properly in place before storing your mask, and keep it in a clean, dry place. This simple step helps extend the life of your respiratory equipment and ensures your safety.

FAQ about obturators for full-face respiratory protection mask 3M series 6000 and 7000:

Is this plug compatible with all 3M masks?

It is compatible with full-face masks from the 6000 and 7000 series, including models 6700PF, 6800PF, and 6900PF.

Can this plug be used for fit tests?

Yes, this plug is designed to allow fit tests with Powerflow respirators.

How do I know if the plug needs to be replaced?

Regularly inspect the plug. If it is cracked, damaged, or no longer fits properly, it must be replaced to ensure effective respiratory protection.

Additional suggestions for obturators for full-face masks:

Need additional safety equipment? See the articles; Regulatory and mandatory poster (EAMIANTE), supplementary vinyl sticker label (EDECHET), roll of 500 labels (Eramiante500) or aluminum sign holder, 10-3/4 in. x 10-3/4 in. (ECLAP), motorized respirator with 1000 protection factors (R6800PF), 3M  mask protection film (R6885).

Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51), containment fabric (SACTT2) or (SAH2MA) air cleaners.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.