Oil only absorbent pads for oil based spills, 15 X 18, 100 unit

Square absorbent sheets for oils and hydrocarbons sold in packs of 100

General description of 15x18 inch square absorbent pads

These absorbent pads are specially designed to effectively manage spills of oils, hydrocarbons, and oily chemicals. Their hydrophobic material allows them to absorb only petroleum-based liquids, without retaining water. Sold in packs of 100 pads, they are a quick and reliable solution for emergency response, preventive maintenance, or daily operations in industrial environments.

Their white color makes it easy to identify the substances absorbed and quickly distinguish oil-specific absorbents.

Special features of an oil and hydrocarbon absorbent pad

Each pad measures 15 in x 18 in (38 cm x 46 cm), an ideal size for covering a targeted area or wiping a contaminated surface. They are made of non-woven polypropylene, reinforced with a grid of dots created by sonic welding, which increases their strength and stability during absorption.

The sheets are perforated in the center, allowing only half of a pad to be used when the situation requires it, thus avoiding waste.

A full package can absorb up to 68 liters (18 US gallons) of oil.

Properties of an absorbent sheet with 68 liters of absorption capacity

These pads are made from polypropylene fibers obtained through a meltblown process. This method creates an extremely fine structure that quickly retains liquids while ensuring excellent absorption capacity.

Key properties:

• Hydrophobic: repel water and absorb only oils
• Large absorbent surface area: fast and effective absorption
• Embossed structure for better liquid distribution
• Average weight 240 g/m², ensuring a balance between strength and absorption capacity
• Lightweight and easy to handle, even when saturated

Applications for 15 x 18 inch absorbent pads

These absorbent pads are suitable for a variety of environments:

• Mechanical workshops
• Garages and repair centers
• Factories and processing sites
• Port areas or maritime facilities
• Warehouses and handling areas
• Aeronautics and transportation

They can be used to:

• Wipe contaminated surfaces
• Absorb drips under a machine
• Manage a chronic leak
• Respond quickly to an accidental spill

Thanks to their hydrophobic nature, they are as effective indoors as outdoors, even on wet floors.

Restrictions on polypropylene absorbent sheets

These pads must not be used when the nature of the spilled liquid is unknown. They are intended exclusively for oils, hydrocarbons, and oily liquids.

They are not suitable for corrosive, reactive, acidic, alkaline, or non-oily solvent products.

They must not be used near flames or sources of high heat.

Maintenance and service life of polypropylene absorbent pads for oil and hydrocarbons

The pads must be stored in a dry place, away from direct sunlight and sources of moisture.

Once used, they are considered hazardous materials and must be disposed of in accordance with applicable regulations.

In Quebec, this includes:

• the Environment Quality Act,
• the Hazardous Materials Regulation,
• the Transportation of Hazardous Materials Regulation.

It is recommended that approved bags or containers be used for the temporary storage of soiled absorbents.

FAQ – Absorbent pads for oils and hydrocarbons

1. What is the difference between these pads and universal absorbents?

These pads are hydrophobic, which means they only absorb oils, fuels, and hydrocarbons, even in the presence of water.

Universal absorbents (often gray) absorb both water and non-oily liquids.

For oil spills specifically, white pads are always the most effective.

2. Can these pads be used outdoors or on water?

Yes. Since they repel water, they are ideal for outdoor use, wet floors, or areas where oil floats on the surface. They remain effective even in rain or marine environments.

3. Can I cut or use only half of a pad?

Yes. The pads are perforated in the center, allowing you to use half a sheet for small spills, limiting waste. This feature is particularly useful for daily maintenance or precise interventions.

4. How do I dispose of pads once they are saturated?

Used pads become hazardous waste because they contain oils or hydrocarbons. They must be disposed of in accordance with environmental regulations.

In Quebec:

• follow the Environment Quality Act,
• the Hazardous Materials Regulation,
• and the Transportation of Hazardous Materials Regulation.

It is recommended that you use an approved container for temporary storage.

5. How much can a pack of 100 pads absorb?

A full pack absorbs approximately 68 liters (18 US gallons) of oil, making it an effective solution for moderate to large spills.

Capacity may vary slightly depending on the viscosity of the liquid.

Suggestions for complementary products to the oil and hydrocarbon spill absorbent pad, 15 x 18 inches :

You need additional safety equipment. Look at the items; oil spill pads (ABHR), oil spill socks (ABHB30), construction helmets (TA14LR), nitrile gloves 3.8 mil (GL7005), textured gloves (GL9315), high-visibility rain suits (VP5618).

Under “Accessories” at the bottom of the page. If you're looking for work equipment, have a look at the following products: Full face masks (R6800) and 3M organic vapor filter cartridges (R6001).

Texts colored green correspond to hyperlinks leading to specific safety equipment or to a general information link.