3M Adflo PAPR Flow Meter

Flow Meter for Adflo 3M PAPR System

The Adflo 3M PAPR flow meter (ref. 15-0099-05) is the official 3M verification tool designed to confirm that the manufacturer's minimum airflow rate is met before each use of the Adflo powered air-purifying respirator system. Its use is required before wearing the respirator. Authentic 3M accessory, easy to use for regular airflow verification. Made in Sweden. 3M item number: 7000126724. UPC: 00051131925892.

This accessory is compliant with ANSI Z87.1-2010 standards and NIOSH-approved. Compatible with the Adflo 3M powered air-purifying respirator. Available as a special order item; estimated lead time: 10 business days.

Packaging dimensions: 9.4 in (H) × 6.4 in (W) × 1.4 in (D). Gross weight: 0.114 lb. Air transport eligible.

3M purchase code: 7000126724, model: 15-0099-05

Benefits

Mandatory check before each use

The flow meter confirms that 3M's minimum airflow rate is achieved. Do not use the respirator if airflow is insufficient - this tool ensures your protection complies with standards.

Official Adflo 3M accessory

Authentic 3M accessory specifically designed for the Adflo PAPR system. Compatibility and reliability guaranteed by the manufacturer.

Easy to use

Quick and intuitive verification procedure, easily integrated into daily work routines without complex training.

ANSI Z87.1-2010 and NIOSH compliant

Meets North American safety standards applicable to respiratory protection equipment.

Field Advantages and Practical Use

Why the Flow Meter is Essential

The 15-0099-05 flow meter is the only tool for objectively verifying that the Adflo blower delivers the minimum airflow required by 3M to ensure respiratory protection. A partially loaded filter or a weakened battery can reduce airflow below the safety threshold without the user feeling any difference. The flow meter eliminates this uncertainty by providing a precise, instant reading of actual airflow.

Recommended Verification Procedure

Airflow verification should be performed before each use of the Adflo system, especially after replacing the particulate filter, after a long storage period, or when the battery is partially discharged. Connect the flow meter to the Versaflo helmet inlet, start the blower, and read the displayed value. If airflow is below the minimum value specified by 3M, the system must not be used until the cause is identified and corrected.

Applications and Regulatory Contexts

In many regulated industrial sectors, documented airflow verification is a regulatory requirement or part of the respiratory protection program. Health and safety managers use the flow meter for periodic inspections of their entire Adflo fleet. Traceability of verifications (date, result, responsible person) provides compliance evidence during safety audits. The 15-0099-05 flow meter is compatible with all Adflo blower models marketed by 3M.

Flow Meter Maintenance

Store the flow meter in its protective case when not in use. Avoid exposing it to shocks, extreme temperatures, or liquid splashes that could affect readings. Inspect the sealing gasket at each use. A damaged flow meter or one giving inconsistent readings must be removed from service and replaced. Regular calibration per manufacturer recommendations ensures measurement reliability over time.

FAQ

Is it mandatory to use this flow meter before each PAPR use?

Yes. 3M recommends verifying airflow before each use of the Adflo PAPR respirator. The system must not be used if minimum airflow is not achieved.

What is the lead time for this item?

This item is made to order. Estimated production lead time is 10 business days at 3M. Contact Sylprotec to confirm current lead times.

Is this tool compatible with other 3M PAPR systems?

This accessory is designed for the Adflo 3M PAPR system. Verify compatibility with other 3M PAPR models before purchasing.

Are there shipping restrictions?

Air shipment is possible for this item according to 3M information.

Complementary Suggestions

To optimize your welding equipment, Sylprotec recommends the following personal protective equipment, compatible for simultaneous use with your Speedglas helmet: Horizon nylon latex gloves (G051144), Privo clear lens safety glasses (YA12261), LASER LITE corded earplugs (OA1101C), ARC 2 blue flame-resistant coverall (V1766), and Zenith nitrile polyester gloves (GZ13POFN). Find these products under "Accessories" at the bottom of the page.

Among Speedglas family accessories, you will find the scratch-resistant outer protection plate (R06-0200-51), the inner protection plate (R06-0200-30) and the Speedglas inner 04-0280-00 plate (YS0280).

Green-colored text corresponds to hyperlinks leading to specific safety equipment or general information.