Zenith yellow and black anti-skid tape, 60 ft roll

Zenith yellow and black anti-skid tape, 60 ft roll

Offered in 2 widths, 2 in and 3 in, always in a 60 ft roll: compare them in the format table below, then select yours from the drop-down menu.

Delivery time varies with the manufacturer; contact us for a delivery date.

Available formats of the Zenith anti-skid tape

Both formats have the same surface, the same thickness and the same roll length; only the width changes.

Zenith anti-skid tape adds grip underfoot where people walk, while its yellow and black colours keep the passage easy to see. Its 60 grit abrasive paper surface sits on an adhesive backing, so it applies directly to the substrate, indoors or outdoors. It resists water, grease and oil, and it is made in Canada.

Features of the Zenith anti-skid tape

• 60 grit abrasive paper surface
• Highly visible yellow and black contrast
• Adhesive backing for direct application
• Resists water, grease and oil
• For indoor and outdoor use
• 30 mils thick

Applications of the Zenith anti-skid tape

In a plant, warehouse, store or building, this tape goes on walking areas that need an added anti-skid surface, such as steps, ramps, door thresholds or pedestrian aisles. The yellow and black colours also draw attention to the treated spot.

A laminated marking tape is mainly used to identify or outline an area. This tape adds an abrasive surface to that visual cue, making it the right choice when grip underfoot is the main need.

Technical specifications of the Zenith anti-skid tape

The approximate overall size comes from the roll's package and is not a measurement of the bare roll. The weights listed are not net weights measured by the manufacturer.

Application and care of the Zenith anti-skid tape

Clean the substrate and let it dry completely. On a porous substrate, first check that it has received the appropriate treatment. Apply the tape without stretching it, between 50 and 95 °F, then press evenly along the whole strip.

Afterwards, check the condition of the tape during site inspections. Replace any strip that is lifting or whose abrasive surface looks worn.

FAQ: the Zenith anti-skid tape

Which width should I choose, 2 in or 3 in?

Start from the strip width you want on the surface to treat. The 2 in roll gives a narrower strip, while the 3 in roll covers more with each length applied. The other technical features are the same.

What do 60 grit and 30 mils mean?

60 grit refers to the grit of the abrasive paper surface, which provides the grip. The stated thickness for both formats is 30 mils, or 0.76 mm.

Can it be used indoors and outdoors?

Yes, this tape is intended for both environments and it resists water, grease and oil. Indoors or outdoors, it must be applied within the specified temperature range.

How do I prepare the surface and apply the tape?

The substrate must be clean and dry. Apply the tape without stretching it, then press evenly so that the adhesive backing makes full contact.

What are the application and service temperatures?

Apply it between 50 and 95 °F (10 and 35 °C). Once applied, the tape has a service temperature of -20 to 175 °F (-28.9 to 79.4 °C).

Suggestions for the Zenith anti-skid tape

During application, match protection to the task and the workplace. To handle and cut the tape, choose Superior Touch cut-resistant gloves (GS13FGFNT) in a Dyneema composite knit with a foam nitrile coating, and wear Cee Tec protective eyewear (YA12E93103) with yellow polycarbonate lenses as needed. On a construction site or wherever head protection is required, the MSA V-Gard safety helmet (TA80) completes the equipment. The Pioneer women's black safety vest (V139FN) keeps small tools within reach. Applying the tape does not in itself call for hearing protection; in a noisy workplace, plan for LASER LITE earplugs (OA1101C) with cord.

To complete the marking of walking areas, compare the black self-adhesive anti-skid (ECT748) tape and the yellow and black laminated (ECT751) PVC hazard tape. To temporarily isolate the area during application, choose the yellow CAUTION barricade tape (ECT3YE1) or the yellow ATTENTION barricade tape (ECT3YF1). An expandable safety barrier (EPT999) made of aluminium painted yellow or a yellow Zenith portable mobile barrier (EPT4013) completes the temporary perimeter.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.