Zenith wall mount barrier with magnetic tape 7 ft, stainless finish

Zenith wall mount barrier with magnetic tape 7 ft, stainless finish

Manufacturer code Zenith: SGR017, model SGR017

This item is not kept in stock. Please allow 15 days for delivery.

Available in 2 tape options. Select the variant you need from the drop-down menu.

The Zenith stainless finish wall mount barrier restricts access in corridors, washrooms and warehouse aisles. Its steel case, with a stainless finish, measures 3-5/8 in long, 3 in wide and 5-5/8 in high; the case mounts to the wall with screws. A separate wall receiver for the tape end and hardware are included. The cassette holds a slow retracting tape 2 in wide and 7 ft (84 in) long, and a specially designed locking mechanism prevents accidental release. The end of the tape has 2 magnets that connect it to any metal surface. Two tapes are offered: black and yellow stripes with no legend (SGR017), or yellow with the legend “Attention Ne Pas Entrer”, in French only (SGR020). Made in China, it is covered by a 1-year limited warranty.

Features of the Zenith stainless finish wall mount barrier

• Steel case, stainless finish, 3-5/8 X 3 X 5-5/8 in
• Slow retracting 2 in X 7 ft tape
• Tape end with 2 magnets connects to any metal surface
• Yellow “Attention Ne Pas Entrer” tape or black and yellow stripes
• Screw-mount case; wall receiver for the tape end and hardware included

Applications of the Zenith stainless finish wall mount barrier

In corridors, washrooms and warehouse aisles, the Zenith stainless finish barrier closes access during cleaning or a repair: pull out the tape and attach its magnetic end to a metal surface. The yellow “Attention Ne Pas Entrer” tape gives the instruction in French; the black and yellow striped tape flags the area with no text.

Care of the Zenith stainless finish wall mount barrier

Let the tape retract slowly rather than letting it go. Wipe the case and the tape with a damp cloth. Periodically check that the wall receiver hardware is tight.

FAQ: the Zenith stainless finish wall mount barrier

What is the case finish?

A stainless finish on a steel case. A black finish version is offered on another page.

What legend does the tape carry?

The black and yellow striped tape (SGR017) has no legend; the yellow tape (SGR020) reads “Attention Ne Pas Entrer”, in French only.

Is the case magnetic?

No. The end of the tape carries 2 magnets and connects to any metal surface; the case mounts to the wall with screws. The included wall receiver receives the tape end.

Can the tape release on its own?

No. A specially designed locking mechanism prevents accidental release.

Where is it made and what is the warranty?

It is made in China and covered by a 1-year limited warranty.

Suggestions for this Zenith stainless finish wall mount barrier

For the custodian closing a corridor or washrooms during floor washing with this Zenith stainless finish barrier, plan for a Pioneer women's yellow high-visibility surveyor vest (V6693F) with 15 pockets, Dexterity Kevlar blend cut-resistant gloves (GS13KFNT) with foam nitrile coating, 3M Privo 12261 safety glasses (YA12261) with a clear polycarbonate lens, a Zenith 497 disposable particulate mask (R497) when sweeping dust and a 36 in orange cone (EPTCONE36) with 2 reflective collars in front of the entrance.

For a black finish case and a blue tape, see the same Zenith barrier in black (PINOZB7) finish; select the blue tape option from the drop-down menu. To close a wider passage, the 13 ft Zenith mobile barrier (EPT4013) expands straight, curved or round, and the Tensator TensaBarrier screw (PINOD5XD) mount unit offers a 15 ft red tape. To mark off a large area, add a yellow “Danger” 3 in X 1000 ft barricade tape (ECT3YE7) and, at a corridor intersection, a full-dome convex mirror (M86).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.