Laminated PVC hazard tape, red and white, 1 to 6 in X 54 or 108 ft

Laminated PVC hazard tape, red and white

This item is not kept in stock. Please allow 5 days for delivery.

This red and white hazard tape marks off and identifies fire protection equipment in plants, warehouses and shops. Its striped PVC is over-laminated with a durable clear film: the smooth gloss finish resists wear and scuffing, does not hold dirt and cleans easily, and the colours stay sharp where pedestrians and forklifts travel. It is sold by the roll, in five widths and two lengths.

Features of the red and white laminated tape

• Striped PVC covered with a clear laminating film that withstands heavy abrasion.
• Smooth gloss finish that resists dirt and scuffing and cleans easily.
• Rubber adhesive that holds on clean, dry surfaces.
• Applies to floors, walls, pipes and equipment.

Available formats: 5 widths, 54 or 108 ft rolls

Red and white tape applications

According to the manufacturer's colour code, red and white identifies fire protection equipment: it is used to mark the location of extinguishers, fire hose cabinets, manual pull stations and fire valves, and the space to keep clear in front of them. The 108 ft roll suits long aisles and large areas; the 54 ft roll is for small projects, touch-ups to existing marking and tight areas, without wasting tape.

The same laminated tape is available in yellow and black, black and white or green and white, for a complete colour code throughout the plant.

Red and white tape technical specifications

Tape installation and care

Clean and dry the surface before applying, then press firmly along the whole length so the adhesive bonds. Wash the tape as needed: its smooth finish cleans easily. Replace worn or lifting sections to keep the marking sharp.

FAQ: red and white hazard tape

What does red and white mean on a hazard tape?

According to the manufacturer's colour code, red and white is used to mark fire protection equipment. Also follow the colour code established at your facility.

Why choose a laminated tape?

The clear film covering the PVC protects the colours from abrasion: the tape keeps its appearance longer in busy areas and cleans easily.

Which roll length should I choose for the red and white tape?

The 108 ft roll for long aisles and large areas; the 54 ft roll for small projects and touch-ups.

Which surfaces does the tape stick to?

Floors, walls, pipes and equipment, as long as the surface is clean and dry.

Is the red and white tape available in other colours?

Yes: the same laminated tape is available in yellow and black, black and white or green and white, each on its own page.

Suggestions for red and white marking

For the worker who applies the tape on their knees on the floor, plan for lightweight (VG100) Impacto kneepads, soft rubber Impacto knee pads (VG104), a safety knife (SAEC5) with an auto-retracting blade to cut the tape cleanly, a retractable lanyard (SAECC5) so the knife is never dropped and an adjustable orange traffic vest (VV50) to stay visible in the aisles.

To complete the marking, add a 10 lb ABC dry chemical (EXABC10) extinguisher, a 10 lb CO₂ (EXCO10) extinguisher, an extinguisher sign (EI700) visible from afar, an Amerex 862 vehicle bracket (CUNV10), selected to fit the extinguisher diameter and a bilingual windowed cover (CE10BF) for a 10 lb extinguisher.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.