compare_arrows

Heavy-traffic floor tape, red/white, 100 ft

Reference : ECTHDRB-2
$267.80

This item is not kept in stock. Please allow 5 days for delivery.

Red/white striped floor marking tape to flag machine surroundings, loading docks and forklift lanes, available in 100 ft rolls in a 2 in or 4 in width. Made of 0.050 in (50 mil) striped PVC protected by a surface layer, it resists abrasion, chemical exposure and scuffing. Its beveled edges reduce the impact of wheels, and its high-tack adhesive bonds to clean, dry, smooth floors.

Width: 2 in
Quantity

Compare

Heavy-traffic floor tape, red/white, 100 ft

This item is not kept in stock. Please allow 5 days for delivery.

Available widths: 2 in and 4 in, 100 ft roll

Available in 2 widths. Select the variant you need from the drop-down menu.

Sylprotec codeWidthLengthWeight
ECTHDRB-22 in (5.08 cm)100 ft (30.48 m)6 lb (2.72 kg)
ECTHDRB-44 in (10.16 cm)100 ft (30.48 m)11 lb (4.99 kg)

The dimensions shown are for variant ECTHDRB-2.

This floor tape with red and white stripes draws attention to areas that need flagging: machine surroundings, loading docks, forklift lanes and 5S areas. It is made of 0.050 in (50 mil) striped PVC protected by a surface layer. Its beveled edges reduce the impact of forklift, pallet jack and floor scrubber wheels, and its high-tack rubber-based adhesive bonds to most clean, dry, smooth floors. The 100 ft (30.48 m) roll comes in a 2 in (5.08 cm) or 4 in (10.16 cm) width. It is made in the United States.

Features of the red/white striped floor tape

  • Highly contrasting red and white stripes to flag an area.
  • 0.050 in (50 mil) PVC with a protective surface layer.
  • Beveled edges that reduce the impact of forklifts and wheeled equipment.
  • High-tack, heavy coat weight rubber-based adhesive.
  • Resistance to abrasion, chemical exposure and scuffing; removes cleanly with minimal residue.

Red/white striped floor tape applications

The manufacturer recommends it for hazard awareness and marking off safety zones, warehouse aisle and lane marking, forklift zone identification, and 5S and Lean layouts. The 2 in width suits narrower areas; the 4 in width is seen from farther away around an area to flag. This page carries red/white stripes only. The same series comes on sister pages: the yellow tape (ECTHDJA), the blue roll (ECTHDBL), the red version (ECTHDRG), the green model (ECTHDVE), the white variant (ECTHDBC) and the black option (ECTHDNO), each in 2 and 4 in, as well as the yellow/black striped counterpart (ECTHDJN), in 2, 3 and 4 in.

Red/white striped floor tape technical specifications

FeatureDetail
ColourRed and white stripes
MaterialStriped PVC, protective surface layer
Thickness0.050 in (50 mil, 1.27 mm)
Widths2 in (5.08 cm) or 4 in (10.16 cm)
Length100 ft (30.48 m) per roll
EdgesBeveled
AdhesiveRubber-based, high tack, heavy coat weight
Application surfaceClean, dry, smooth floor
Country of originUnited States
Sold byRoll

Striped floor tape installation and care

Sweep and clean the floor, then let it dry. Unroll the tape around the area to flag, cut it to length and press it firmly across its full width, right to the edges. Sweep regularly to keep the stripes visible, and replace any section with a lifting edge or too worn. When the layout changes, the tape removes cleanly from most surfaces with minimal adhesive residue.

FAQ: red/white striped floor tape

Which width should I choose?

The 2 in suits narrower areas. The 4 in is seen from farther away. Also follow the marking rules of your facility.

What are the red and white stripes for?

Their contrast draws attention to an area that needs flagging. Follow your facility's colour code; the other colours are on their sister pages, listed in the applications section.

Does it stand up to forklift traffic?

Yes. Its beveled edges reduce the impact of wheels, and its 0.050 in PVC, protected by a surface layer, resists abrasion, chemical exposure and scuffing.

What floors can it be applied to?

Most clean, dry, smooth floors. Clean and dry the surface before application for good adhesion.

Can it be removed if the layout changes?

Yes. It removes cleanly from most surfaces with minimal adhesive residue.

Suggestions for the red/white striped floor tape

For the technician who marks machine surroundings on their knees, plan for the Impacto (VG105) knee braces with joint and hard shell, the cost-effective leather (G308) split-leather and cotton-knit gloves with safety cuffs, the 3M (YASF401) SF401 SecureFit safety glasses, the Oxford (V6673) 6673 yellow class 2 surveyor vest, and the E-Z-Fit (OA1208) 312-1208 uncorded disposable earplugs.

To complement your equipment: Acrylic quarter dome convex mirror, for 90-degree view in a corner (M89); Acrylic half dome convex mirror, for 180-degree view in a T-intersection (M88) and Acrylic round convex mirror with adjustable arm, 100-degree field of view (M64).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

ECTHDRB-2

Data sheet

Product group
Safety equipment
Main category
Sign and lock
Sub category
Cones and barricade tapes
Name of the product
Marking tape
Product code
ECTHDRB
Sort by keywords
Marking tapes
Product use
Floor marking
Manufacturer
Incom Direct
Country of origin
United States of America
Thickness in mils
50 mils
Choice of format
2 and 4 in
Features
To mark aisles and forklift lanes on the floor
Additional Features
Beveled edges
Mounting type
Permanent adhesive back
Material
Chlorinated polyvinyl (PVC)
Length (ft/m)
100 ft / 30.48 m
Length (in/cm)
12 in / 30.48 cm
Width (in/cm)
12 in / 30.48 cm
Height (in/cm)
2 in / 5.08 cm
Weight (lb/kg)
6 lb / 2.7 kg
Sold by
Roll
Color
Red/White
HS Code
3919102055
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Caution
Apply to a clean, dry, smooth floor

Specific References

MPN
AS251

You might also like

Comments (0)
No customer reviews for the moment.