compare_arrows

Engineer-grade reflective tape, 2 in X 30 ft

Reference : ECTREF-JN
$45.50

This item is not kept in stock. Please allow 5 days for delivery.

Engineer-grade reflective tape, 2 in X 30 ft, to make bollards, posts, racking, loading docks and other obstacles visible day and night. Available in white, red, yellow or orange, or in yellow/black or red/white stripes. Its microprismatic acrylic film reflects light evenly from every angle, and its permanent pressure-sensitive adhesive applies to clean, smooth surfaces. Complies with ASTM D-4956 Type I and EN 12899-1 Class 1.

Color: Yellow/Black
Quantity

Compare

Engineer-grade reflective tape, 2 in X 30 ft

This item is not kept in stock. Please allow 5 days for delivery.

Available colours: 4 solid colours and 2 striped patterns, 2 in X 30 ft roll

Available in 6 colours. Select the variant you need from the drop-down menu.

Sylprotec codeManufacturer modelColour
ECTREF-BCRST101White
ECTREF-RGRST102Red
ECTREF-JARST104Yellow
ECTREF-ORRST105Orange
ECTREF-JNRST106Yellow/Black
ECTREF-RBRST107Red/White

This reflective tape makes obstacles and hazard areas visible: parking bollards and curbs, posts, warehouse walls and racking, guardrails, loading docks and poorly lit areas. It is made of a high-gloss acrylic film whose microprisms, set in several orientations, send the light that strikes them back toward its source, uniformly whatever the application angle. By day, its bright colour marks the obstacle; at night, it shines as soon as headlights, a flashlight or building lighting fall on it. Its permanent pressure-sensitive adhesive applies directly to a smooth, clean surface. The roll measures 2 in X 30 ft (5.08 cm X 9.14 m). It meets ASTM D-4956 Type I and EN 12899-1 Class 1, and is made in the United States.

Features of the engineer-grade reflective tape

  • Engineer-grade omnidirectional microprismatic acrylic film.
  • Bright colour by day and retroreflection at night under incident lighting.
  • Permanent pressure-sensitive adhesive that conforms to smooth, flat or curved surfaces.
  • Thin 5 mil nominal film (typical thickness 4.5 to 5.5 mil).
  • Meets ASTM D-4956 Type I and EN 12899-1 Class 1.

Engineer-grade reflective tape applications

The manufacturer recommends it for parking bollards and curbs, posts, warehouse walls and racking, loading docks and freight terminals, guardrails and poorly lit corners, as well as perimeter marking. It is useful wherever forklift or vehicle headlights, or a flashlight, light up the obstacle. The solid colours mark an obstacle; the yellow/black and red/white stripes signal a hazard on machinery, docks and rack uprights. Its durability is established for vertical exposure only: for floor marking, choose a floor tape instead, such as the yellow/black striped heavy-traffic floor marking roll (ECTHDJN), 2 in X 100 ft. This tape is not presented as a vehicle conspicuity tape.

Engineer-grade reflective tape technical specifications

FeatureDetail
ConstructionHigh-gloss microprismatic retroreflective acrylic film; diagonal stripes for the yellow/black and red/white patterns
AdhesivePermanent, pressure-sensitive, covered by a polypropylene liner
Film thickness0.005 in (5 mil nominal); typical thickness 4.5 to 5.5 mil (114 to 140 μm)
Dimensions2 in X 30 ft (5.08 cm X 9.14 m)
ColoursWhite, red, yellow, orange, yellow/black stripes, red/white stripes
ComplianceASTM D-4956 Type I; EN 12899-1 Class 1
DurabilityUp to 7 years in white, red, yellow and both striped patterns; up to 3 years in orange; vertical exposure only
Service temperature-10 °F to 150 °F (-23 °C to 65 °C)
Minimum application temperature65 °F (18 °C)
Storage1 year after purchase, between 65 and 75 °F (18 to 24 °C), 50% ± 5% relative humidity
Country of originUnited States
Sold byRoll

Reflective tape installation and care

Apply the tape to a smooth, clean, dry surface at a temperature of at least 65 °F (18 °C). Remove the liner as you go and press the tape firmly along its whole length, following the shape of curved surfaces. Store rolls between 65 and 75 °F (18 to 24 °C) at 50% ± 5% relative humidity, and use them within a year of purchase. Clean the tape so it keeps its reflectivity, and replace it if damaged.

FAQ: engineer-grade reflective tape

Which colour should I choose?

Choose a solid colour, white, red, yellow or orange, to mark an obstacle according to your internal signage code, and a yellow/black or red/white striped pattern to signal a hazard. All six choices are selected from the drop-down menu on this page.

Does the tape glow in the dark?

No. It does not produce light: its microprisms send the light of headlights, a flashlight or building lighting back toward its source. In complete darkness, with no light aimed at it, it cannot be seen.

How long does this tape last?

The manufacturer states a durability of up to 7 years for white, red, yellow and both striped patterns, and up to 3 years for orange, in vertical exposure only.

Can it be applied to the floor?

Its durability is established for vertical exposure only. For floor marking, choose a floor tape instead, such as the yellow/black striped heavy-traffic floor marking tape (ECTHDJN), 3 in X 100 ft.

Which standards does it meet?

It meets ASTM D-4956 Type I and EN 12899-1 Class 1. Check the requirements of the local authority for your application.

Suggestions for the engineer-grade reflective tape

For the attendant who applies the tape to posts and dock edges in a warehouse, plan for the MSA Super V (TA82) safety helmet, type 2 class E, the Endura (G301) smooth cowhide and cotton work gloves, the 3M Virtua (YA11872) Max 11872 safety glasses with foam gasket, the Pioneer (V6692) 6692 high-visibility orange surveyor's vest with 16 pockets near forklifts, and the steel toe (VC8019) guards with adjustable straps on the docks.

To complement your equipment: Kleton steel safety bollard, 4-1/2 in diameter, yellow (EBKI293); Eagle HDPE column protector, yellow (PC17XX) and Kleton steel rack upright protector, safety yellow (EXXXXXX).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

ECTREF-JN

Data sheet

Product group
Safety equipment
Main category
Sign and lock
Sub category
Cones and barricade tapes
Name of the product
Reflective tape
Product code
ECTREF
Sort by keywords
Marking tapes
Product use
Marking physical hazards
Approved/Certified
ASTM D-4956 Type I ; EN 12899-1 Class 1
Manufacturer
Incom Direct
Country of origin
United States of America
Thickness in mils
5 mils
Features
To highlight posts, curbs and obstacles day and night
Additional Features
Omnidirectional microprismatic film
Characteristic adding safety
Retroreflective: returns light toward its source; requires incident illumination.
Mounting type
Permanent adhesive back
Material
Acrylic
Length (ft/m)
30 ft / 9.14 m
Length (in/cm)
360 in / 914.4 cm
Width (in/cm)
2 in / 5.08 cm
Height (in/cm)
0.02 in / 0.05 cm
Weight (lb/kg)
0.58 lb / 0.263 kg
Sold by
Roll
Color
Variable depending on selection
HS Code
3919101050
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Caution
For indoor and outdoor use

Specific References

MPN
RST106

You might also like

Comments (0)
No customer reviews for the moment.