- New
Kleton steel rack upright protector, safety yellow
EBKH858
$47.55
This item is not kept in stock. Please allow 15 days for delivery.
Kleton rack upright protector in 1/4 in thick steel, safety yellow powder coat finish. Four pre-drilled holes for 1/2 in anchors (not included). Offered in 2 heights: 12 or 18-1/4 in.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Kleton steel rack upright protector, safety yellow
Manufacturer code KLETON: KH858, model KH858
This item is not kept in stock. Please allow 15 days for delivery.
Available in 2 heights. Select the variant you need from the drop-down menu.
| Sylprotec code | Manufacturer code | Height |
| EBKH858 | KH858 | 12 in |
| ERB925 | RB925 | 18-1/4 in |
The Kleton upright protector shields rack uprights from forklift and pallet jack impacts. Made of 1/4 in thick steel, it measures 7 x 7 in at the base and anchors to the floor through four pre-drilled holes for 1/2 in anchors, not included. Its safety yellow powder coat keeps it visible and protects it against rust and wear. Offered in a 12 in or 18-1/4 in height, it is covered by a 1-year limited warranty.
Features: Kleton steel rack upright protector
- 1/4 in thick steel
- Dimensions: 7 x 7 x 12 in or 7 x 7 x 18-1/4 in
- Safety yellow powder coat, resists rust and wear
- 4 pre-drilled holes for 1/2 in anchors (anchors not included)
- 1-year limited warranty, sold individually
Applications: Kleton steel rack upright protector
Anchored at the foot of a rack upright, along an aisle or beside warehouse traffic lanes, this protector shields the upright from forklift and pallet jack impacts where manoeuvres are tightest.
Care: Kleton steel rack upright protector
Inspect the protector and the upright after any impact. Retighten the anchors as needed and touch up paint on bare steel to prevent rust. Replace the protector if it is bent.
FAQ: Kleton steel rack upright protector
Are the anchors included?
No. The protector has four pre-drilled holes for 1/2 in anchors, to be purchased separately.
Which height should I choose, 12 or 18-1/4 in?
Both heights share the same 7 x 7 in base; the 18-1/4 in version (15 lb) covers more of the upright than the 12 in version (12 lb).
Does the finish resist rust?
Yes, the safety yellow powder coat protects the steel against rust and wear. Touch it up if an impact exposes bare metal.
Do I need one protector per upright?
Yes, it is sold individually: count one protector for each upright exposed to traffic.
Where is the protector made and what is the warranty?
It is made in China and covered by a 1-year limited warranty.
Suggestions for this product
For the warehouse worker fastening this Kleton protector at the foot of an upright while forklifts run in the next aisle, plan for a detachable Pioneer orange high-visibility vest (V6930) to be seen by drivers, TenActiv gloves (GSTXFNVB) that protect against impacts, Cee-Tec safety glasses (YA12E93101) with clear lenses against concrete chips when drilling, 3M disposable earplugs (O1100) for hammer drill noise and a 3M valved mask (R8210V) against concrete dust.
To close off the aisle during installation, stretch a yellow “Caution” barricade tape (ECT3YE1) and mount a half-dome convex mirror (M88) at the T intersection. In this same lot, protect the aisle end with the Kleton racking aisle (EBRN063) protector, a machine with the Kleton low-profile guard (EBKD127) and a column with the Diversified Plastics octagonal (PCCP6) protector.
EBKH858
Data sheet
- Product group
- Safety equipment
- Main category
- Industrial accessories
- Sub category
- Warehouse products
- Name of the product
- Rack upright protector
- Product code
- EXXXXXX
- Sort by keywords
- Rack upright protectors
- Product use
- Protection of rack uprights against forklift and pallet jack impacts
- Manufacturer
- KLETON
- Country of origin
- China
- Additional Features
- Powder coat, protection against rust and wear
- Mounting type
- 4 pre-drilled holes for 1/2 in anchors
- Material
- 1/4 in thick steel
- Length (in/cm)
- 7 in / 17.8 cm
- Width (in/cm)
- 7 in / 17.8 cm
- Height (in/cm)
- 12 to 18-1/4 in / 30.48 to 46.36 cm
- Weight (lb/kg)
- 12 to 15 lb / 5.44 to 6.8 kg
- Sold by
- Unit
- Color
- Safety yellow
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Warranty
- 1-year limited warranty
- Caution
- Anchors not included
Specific References
- mpn
- KH858
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
This item is not kept in stock. Please allow 15 days for delivery.
Kleton rack upright protector in 1/4 in thick steel, safety yellow powder coat finish. Four pre-drilled holes for 1/2 in anchors (not included). Offered in 2 heights: 12 or 18-1/4 in.