2.7 mils thick Silver Shield ambidextrous powder-free gloves for chemical protection. Sold by pair.




Reduced price!

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Only 2 in stock, clearance price. End of the line.

Silver Shield® ambidextrous powder-free, non-allergenic gloves a thickness 2.7 mils for chemical protection. Sold by paire.

These laminated Norfoil gloves consists of 5 layers of polyethylene (PE) and ethylene-vinyl alcohol (EVOH), a quite resistant material that can protect one from up to 280 different chemical products including alcohols, acetone, benzene, chlorine, ketones, epoxy esters, methanol, methyl ethyl ketone, sodium hydroxide, sulphuric acid (96%), toluene, trichloroethylene and more.

These laminated gloves meet EN420 standard concerning the general requirements of protective glove for the construction field; EN374 standard as for its permeability and its term of protection from chemical and/or infectious agents; and EN388 regarding its resistance to mechanical hazards such as abrasion, cutting, tearing and puncture.

This model of glove is also certified ASTM D3389-05 as for its abrasion resistance, and ASTM F1790-97 for the level of protection against the cuts.

This glove may use for work involving the handling of micro-organisms in general, since it has been designed to protect one from infectious substances (Class D materials according to WHMIS). Besides, you will find the biodanger pictograph on the packaging. The manufacturer also ensures that the glove has an acceptable quality limit (AQL) index of 1,5.

The ‘chemical resistant’ glove pictographis accompanied by a 3-digit code. This code refers to the code letters of 3 chemicals from a list of 12 standard defined chemicals, for which a breakthrough time of at least 30 minutes has been obtained. The Silver Shield® glove has an AHL code which stands for methanol (A), tetrahydrofuran (H) and 96% sulphuric acid (L).

Use for:
This glove is ideal for the furniture industry, chemical manufacturing, laboratories and emergency services. This glove will often be used as a dual protection under another glove that offers a better protection against mechanical hazards.

Maintenance and life service:
This model of glove is designed for single use and should never be reused. It is strongly recommended to dry hands before donning gloves and to wash hands right away after duffing gloves.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryGloves
Sub sub categoryDisposable latex, nitrile, vinyl gloves
Name of the productSilver Shield Glove
Series of productsSilver shield (Tm) 4H Serie
Product codeGSSGXL
Approved/CertifiedASTM D3389-05, ASTM F1790-97, EN374 and EN388
Powder freePowder free
AmbidextrousAmbidextrous glove
Available sizesSize 10 extra-large only
Does not include latex or natural rubber componentsDoes not include latex or natural rubber components
Not approved for medical useNot approved for medical use
Thickness in mils2.7 mils
Length (in/cm)14.5 in - 35.6 cm
Maintenance freeDisposable product
Additional FeaturesCan be used with other gloves as protective liners
ResistanceResistant to more than 280 different chemicals: alcohols, aliphatic and aromatic hydrocarbons, chlorinated compounds, ketones and esters
Material2Ethylene vinyl alcohol (EVOH)
Not washableIt is preferable to replace this glove when it is too worn or soiled. Do not attempt to wash them
Length (in/cm)15 in / 38.1 cm
Width (in/cm)12 in / 30.48 cm
Height (in/cm)0.25 in / 0.6 cm
Weight (lb/kg)1 lb/ 0.45 Kg
Sold byPair
Another packaging available11 Pack (10 units)
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page


14 other products in the same category: