3M P95 NIOSH 42 CFR 84 approved particulate respirator for protection from airborne particles. Sold per box of 20 units, 8 boxes/case.
This respirator is made of a patented electrostatically charged microfiber that makes breathing easier and cooler. It is certified N95 which means it protects the user from 95% of particles in the air. The letter "P" stands for "oil proof", thus the membrane protects one from oil based and non oil based particles, as well as solid, liquid and biological airborne contaminants.
The 8577 respirator features a Cool Flow™ valve, a 3M innovation which helps the wearer to keep cool and reduces potential for eyewear fogging. In short, it provides comfortable and reliable basic respiratory protection that eases the wearing of safety glasses. The straps are design with stapled dual point attachment which helps provide a secure fit.Made in the USA.
This mask has been design for long term work in warm and damp environments. It is design to prtotect one from oil based liquid and sprays particles which emit harmful organic vapours (solvents, degreasing agents, resins). It may also be used when manipulating non-oil based liquids and solids. NIOSH certified respirators (N95, N100, R95, R100, P95 and P100) protect one from silica, the second main cause of chronic respiratory problems after asbestos.
It is recommended to workers in foundries and laboratory facilities, for agriculture or coating and in the petrochemical manufacturing industry.
This respirator helps prevent the inhalation of certain airborne biological particles like mold, Bacillus anthracis (Anthrax), Mycobacterium tuberculosis (Tubercle bacillus Koch) the main causative agent of tuberculosis, pandemic flues (H5N1, H1N1), etc. However, it cannot eliminate the risk of contracting infection, illness or disease. Due to the nature of some contaminants, the exposure limit value of some products and byproducts haven’t been quantified by governmental agencies, thus wearing a respirator doesn’t necessarily protects you.
Do not use for:
Do not use on a beard and other facial hair or if the user suffers from a condition that prevents him from having direct contact with the respirator’s sides. The use of respirators is not recommended to people with compromised respiratory system such as asthma or emphysema. It is strongly discouraged to wear a respirator for application with oil based spray, brush painting, gases, vapours, asbestos and sandblasting. It is also highly advised to stay away from environment that exceed 10 times the permissible exposure limit set by the CNESST or any other government regulation applicable.One should never use a respirator in an oxygen deprived environment (an atmosphere with less than 19,5 % oxygen).
Whenever the respirator is well adjust and a qualitative fit test is successful, this respirator meets ANSI Z92.2-1992 standards, that is, a protection factor of 10. This factor means that the worker can be exposed to a concentration 10 times higher than the exposure limit when not protected. If needed, please contact customer service for more information.
Maintenance and service life:
No maintenance is needed since this respirator is disposable. It has been design for an approximate service life of 40 hours or 30 days depending on which comes first. These numbers are in no way a reference since every work environments is different. The manufacturer’s limitations must be followed.
|Type of product||Safety equipment|
|Main category||Personal protection|
|Sub category||Respiratory protection|
|Sub sub category||Disposable masks|
|Name of the product||P95 Disposable masks|
|Series of products||3M (Tm) Disposable respirator|
|Approved/Certified||P95 and KMOEL P1 compliant|
|FDA approved||None approved for FDA (USA)|
|Country of origin||United State of America|
|Choice of format||Standart|
|Moisture resistant||Good for hot and humid environments|
|Maintenance free||Discard if damaged, contaminated, dirty or worn|
|Respirator size||Medium/Large size|
|Includes natural rubber latex components||Does not contain latex|
|Compatibility with the mask screen used for welding||Not compatible with the mask screen used for welding|
|Contains a braided strap for comfort||Contains a braided strap|
|Contains adjustable buckle straps||Does not contain an adjustable buckle|
|Exhalation valve||Contains a Cool flow valve (Tm) 3M (Tm)|
|Protection factor||Protection factor of 10|
|Flame resistance (ASTM D2859-96)||Not flame resistant|
|Protection against gases and vapors||P95 - Oily and non-oily particles, also protect against low concentrations of organics vapors|
|Faceseal membrane||Not membrane d'étanchéité faciale|
|Respirator Style||Cup-shaped respirator|
|M-nose clip||Contain an M-shaped nose clip|
|Nuisance Odour Relief (< OSHA PEL)||Organic Vapors|
|Aerosol Type||Oily and Non-Oily particles|
|Material1||Advanced electrostatic material|
|Material2||Activated carbon filter|
|Height (in/cm)||6 in / 15.2 cm|
|Length (in/cm)||10 in / 25.4 cm|
|Width (in/cm)||9 in / 22.8 cm|
|Weight (lb/kg)||1 lb/ 0.45 Kg|
|Sold by||Box of 10 units|
|Another packaging available1||8 box per case|
|Another packaging available2||35 cases per pallet (2800 units)|
|Useful life||1095 Days|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page|
No customer reviews for the moment.