compare_arrows
Bradley ceiling-mounted emergency safety shower, with vertical water supply and plastic showerhead, certified ANSI Z358.1-2009.
search
  • Bradley ceiling-mounted emergency safety shower, with vertical water supply and plastic showerhead, certified ANSI Z358.1-2009.
Bradley

Bradley ceiling-mounted emergency safety shower, with vertical water supply and plastic showerhead, certified ANSI Z358.1-2009.

PD19130
$402.45
Quantity

Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

Bradley ceiling-mounted emergency safety shower (S19130), with vertical water supply and plastic showerhead. Certified ANSI Z358.1-2009.

This emergency safety shower has a flow of 22 GPM (83.3 L/min), exceeding the minimum flow requirement of 20 GPM (76 L/min). This shower does not include a device for controlling water temperature.

Ideal for laboratories, medical facilities, industries, workshops, garages, airports, food processing plants, paper mills, and any other places where workers risk being exposed to dust, particulates, and/or hazardous, irritating or corrosive materials.

This ceiling-mounted emergency safety shower has a vertical water supply and can be installed in open areas. It is designed to accommodate ceilings of 8 feet (2.44 m). The emergency safety shower is easy to activate in a single step, simply by pulling on the rigid, triangular handle. Once activated, the emergency safety shower will stay on until manually turned off by returning the handle to its original position.

The emergency safety shower has a SpinTec yellow ABS plastic showerhead that imparts a spiraling motion to the water jet, allowing an even flow of water over a larger area. Pipes are made of galvanized steel protected by a yellow Bradtec covering. This safety shower does not include a drainpipe.

The package includes:

  • Parts necessary for the installation of the emergency shower and the connection to a water supply (some parts are not supplied, see instructions)
  • 1 universal safety sign to indicate the location of the emergency shower
  • 1 inspection tag
  • 1 trilingual instruction booklet (English, French, Spanish). PDF version is also available, see below.

The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature. Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).

We would also like to remind our customers that the emergency shower must not be used to rinse eyes, since the water flow is too strong and may aggravate eye injuries.

Discover the Bradley emergency body shower, the ideal solution to ensure safety in your workplace.

Designed for ceiling installation with a vertical water inlet, this shower complies with ANSI Z358.1-2009 standards. It is perfect for industrial environments or laboratories where chemical or thermal accidents may occur. The Bradley body shower provides quick and efficient decontamination, thus minimizing the risk of serious injury. Choose enhanced safety with this reliable and easy-to-install product.

Make safety a priority.

Peculiarities of:
The Bradley emergency body shower is unique due to its ceiling installation with a vertical water inlet, making it perfect for industrial environments and laboratories. Complying with ANSI Z358.1-2009 standards, it provides quick and efficient decontamination, thus minimizing the risk of serious injury and ensuring enhanced workplace safety. Easy to install, it is a reliable choice for protection against chemical or thermal accidents.

Application:
To use the Bradley emergency body shower, pull the handle to activate the water spray and position yourself under the stream to ensure thorough decontamination. Stay under the shower until all hazardous substances are washed off your body. Keep your eyes closed and breathe calmly to avoid inhaling chemicals.

Maintenance and service life: 
To maintain the Bradley emergency body shower, regularly test it to ensure it is functioning properly. Clean the components and fittings to prevent the buildup of deposits or rust. Also, check that the water flows correctly and without any blockages. If any malfunctions or damaged parts are found, replace them immediately to ensure optimal performance in case of an emergency.

Suggestions:
Do you need additional safety equipment? Check out the following items: CDN Eye Wash Poster (ECU505-812), rigid plastic eye patches, 7.5 X 1.25 X 3.8 cm (PS511), sterile eye pads, 4.1 X 6.6 cm (PS514), Cederroth emergency eye wash solution (PD505-235), wall-mounted eye wash kit, 1 liter (PD520), wall mount for Cederroth eye wash solution (PD505S).

Under “Accessories” at the bottom of the page. If you're looking for work equipment, see the following products: Earplugs (OA101) and 3M N95 respirators (R8210), safety glasses (YASF401).

Texts colored green correspond to hyperlinks leading to specific safety equipment or general information.

PD19130

Data sheet

Type of product
Safety equipment
Main category
First aid and emergency showers
Sub category
Emergency showers
Sub sub category
Emergency showers
Name of the product
Bradley Emergency Body Shower
Product code
PD19130
ANSI Requirements
Compliance ANSI Z358.1-2009
Manufacturer
Bradley
Features
Not include a device for controlling water temperature
Includes
Parts necessary for the installation of the emergency shower and eyewash station and the connection to a water supply (some parts are not supplied, see instructions)
Installation specifications
This ceiling-mounted emergency safety shower has a vertical water supply and can be installed in open areas. It is designed to accommodate ceilings of 8 feet (2.44 m)
Activation type
The emergency safety shower is easy to activate in a single step, simply by pulling on the rigid, triangular handle. Once activated, the emergency safety shower will stay on until manually turned off by returning the handle to its original position.
Operating flow rate
Flow of 22 GPM (83.3 L/min), exceeding the minimum flow requirement of 20 GPM (76 L/min)
Material1
This body shower is equipped with a yellow ABS plastic shower head from SpinTec. The piping is made of galvanized steel protected by the yellow Bradtect coating
Length (in/cm)
6 in / 15.24 cm
Width (in/cm)
6 in / 15.24 cm
Height (in/cm)
6 in / 15.2 cm
Weight (lb/kg)
5 lb / 2.26 Kg
Sold by
Unit
Return conditions
No returnable
New

You might also like