Thermostatic mixing valve, brass, 26 GPM (98.4 L/min) at 30 PSI, certified ANSI Z358.1-2009. For combination emergency showers.

Thermostatic mixing valve made of brass, allowing a flow of 26 US gallons/minute (GPM) at 30 pounds per square inch (PSI), corresponding to 98.4 liters/minute at 7 bars.

Certified ANSI Z358.1-2009, UPC, CPPC and CSA.

This thermostatic mixing valve is an essential device for controlling water temperature. It is sufficient for one combination emergency shower unit (drench shower with eyewash) or for several eyewash stations. Easy to install and to service.

• The water outlet temperature is preset at 29°C (85°F).
• The water outlet temperature may be adjusted from 18°C to 32°C (65°F to 90°F), with a precision of 1.7°C (3°F).
• The recommended temperature range for the hot water inlet is 49°C to 60°C (120°F to 140°F).
• The maximum allowed temperature for the hot water inlet is 82°C (180°F).
• The hot water inlet must always be at least 11°C (20°F) warmer than the outlet temperature of the valve.
• The recommended temperature range for the cold water inlet is 0.6°C to 26.7°C (33°F to 80°F).

This valve includes a liquid thermostat and has a single valve design. The valve will automatically block the hot water supply if the cold water supply is lost. A built-in cold water bypass system ensures cold water flow.

The thermostatic mixing valve is equipped with a dial thermometer with Celsius and Fahrenheit scales. The valve has a roughened brass finish, resistant to dirt and scale.