Toxic substances placards class 6.1
ECLA6.1-C
Made in Canada
$0.80
Cardboard, Self-adhesive, Plastic: in stock at Sylprotec. Other formats: please allow 5 days for delivery.
Class 6.1 toxic substances TDG placard: black skull and crossbones and class number 6 on a white 10-3/4 X 10-3/4 in diamond, the placard holder size. This version without a UN box displays the class of the material carried; the version with a blank UN number panel is offered on a separate listing (ECLA6.1UN). Choose low-cost cardboard, reusable high-density rigid plastic or self-adhesive vinyl. Made in Canada and sold individually.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Toxic substances placards class 6.1, 10-3/4 in X 10-3/4 in
This item is not kept in stock. Please allow 5 days for delivery.
This TDG placard identifies a load of class 6.1 toxic substances. It shows the skull and crossbones and the class number 6 in black on a white 10-3/4 X 10-3/4 in diamond that fits most placard holders. This version without a UN box displays the class; to show on the placard the UN number of the material given on the shipping document, choose the version with a blank UN number panel (ECLA6.1UN). Made in Canada, it is sold individually.
Features of the class 6.1 toxic substances placard
- Skull and crossbones and class number 6, toxic substances, in black on a white background.
- Version without a UN box, displaying the class of the material carried.
- 10-3/4 X 10-3/4 in diamond, the standard placard holder size.
- Three materials: low-cost cardboard, reusable high-density rigid plastic or permanent self-adhesive vinyl.
- Compliant, according to the manufacturer, with Transport Canada's TDG Regulations and the IMDG, IATA and ICAO codes.
Available formats: cardboard, rigid plastic, self-adhesive vinyl or aluminum
| Format | Sylprotec code | Best use |
|---|---|---|
| Cardboard (tagboard) | ECLA6.1-C | Low-cost option for temporary or one-time use |
| Rigid plastic | ECLA6.1-P | Weatherproof and reusable in demanding conditions |
| Self-adhesive vinyl | ECLA6.1-VY | Permanent application on tanks and vehicles |
| Aluminum | ECLA6.1-A | Aluminum version, also offered on this listing |
Class 6.1 toxic substances placard applications
This placard is intended for carriers and shippers of class 6.1 toxic substances, in Canada and internationally: transport by vehicle or tank, marine and air shipments. It displays the class of the load on the vehicle or tank. When the UN number must appear on the placard, choose the version with a blank UN number panel (ECLA6.1UN), offered on a separate listing.
Complete your display with the 10-3/4 in aluminum placard holder (ECLAP), the aluminum flip chart placard with five (ECLAP5) legends for vehicles whose cargo changes, and the DANGER (ECLAD) placard for mixed loads, in the cases provided for by the TDG Regulations.
Class 6.1 toxic substances placard technical specifications
| Feature | Detail |
|---|---|
| Class | 6.1, toxic substances |
| Symbol | Skull and crossbones |
| Colours | White and black |
| UN box | None (version with blank panel: ECLA6.1UN) |
| Dimensions | 10-3/4 X 10-3/4 in |
| Materials | Cardboard, high-density rigid plastic or self-adhesive vinyl |
| Country of origin | Canada |
| Sold by | Unit |
Placard installation and care
Apply the self-adhesive vinyl to a clean, dry surface. Keep the placard clean so it stays legible, and replace it if it is damaged, faded or illegible. For a placard exposed to the weather for a long time, choose rigid plastic or vinyl over cardboard.
FAQ: class 6.1 toxic substances placard
Does this placard have a box for the UN number?
No. This version displays the class of the material. When the UN number must appear on the placard, choose the version with a blank UN number panel (ECLA6.1UN), offered on a separate listing.
Where is this placard made?
In Canada. It is sold individually, in the material of your choice.
Which material should I choose: cardboard, plastic or vinyl?
Cardboard for temporary use, rigid plastic for a placard reused in a placard holder, self-adhesive vinyl for permanent application on a tank or vehicle.
Does the placard fit in a placard holder?
Yes. Its 10-3/4 X 10-3/4 in format fits most placard holders.
Is this placard suitable for international shipments?
According to the manufacturer, it complies with the TDG Regulations and the IMDG, IATA and ICAO codes. Always check the requirements that apply to your shipment.
Suggestions for transport of toxic substances
For the driver or handler who applies placards and handles containers at loading, delivery or in the warehouse, plan for Centurion splash goggles (YG454), a Delta Plus Independence type 1 class E safety helmet (TA14LR), 18 in nitrile gloves (GL37185), Ranpro Airlok waterproof boots (VC405FUL) with steel plate and a fluorescent orange traffic vest (VV50) to stay visible on the road and at the loading station.
To respond to an incident on the road or at the warehouse, keep on board HazMat absorbent pads (ABCT100) and socks (ABCB30) for corrosive or hazardous chemical spills, a 10 lb ABC dry chemical (EXABC10) extinguisher, mark off the perimeter with 36 in traffic cones (EPTCONE36) and signal the vehicle with the set of three removable reflectors (EPTR). At night, the UK4AA-eLED anti-explosion flashlight (LL01), intrinsically safe Class 1 Div 1, provides light without creating an ignition source near dangerous goods. A truck driver is an isolated worker as defined by the CNESST: the personal (TR01) first aid kit is suitable when medical services can be reached in less than 30 minutes; far from medical services, plan for the basic (TR02M) first aid kit. Complete with the portable road (TR16) safety kit. The perimeter, absorbent and extinguisher to plan for depend on the material: check the safety data sheet and the 2024 ERG guide shown for the UN number on the shipping document.
ECLA6.1-C
Data sheet
- Product group
- Safety equipment
- Main category
- Sign and lock
- Sub category
- Traffic and transport
- Sub sub category
- Placards for transportation of dangerous goods
- Name of the product
- Placard
- Product code
- ECLA6.1
- Sort by keywords
- Dangerous goods placards
- Product use
- Truck transport
- Approved/Certified
- Compliant, according to the manufacturer, with Transport Canada's TDG Regulations
- Country of origin
- Canada
- Features
- To identify loads containing toxic substances
- Includes
- 1 placard
- Classification
- Class 6.1
- Mounting type
- Adhesive application Designed for a placard holder
- Material
- Available: Aluminum, Self-adhesive, Cardboard and Plastic
- Length (in/cm)
- 10.75 in / 27.30 cm
- Width (in/cm)
- 10.75 in / 27.3 cm
- Height (in/cm)
- 0.04 in / 0.10 cm
- Weight (lb/kg)
- From 0.034 lb / 0.015 kg to 1 lb / 0.454 kg depending on selection
- Sold by
- Unit
- Color
- White/Black
- HS Code
- Rigid plastic: 3926909985 Self-adhesive vinyl: 3919905060 Tagboard: 4911996000
- Return conditions
- No returnable if used
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Customers who bought this product also bought:
Cardboard, Self-adhesive, Plastic: in stock at Sylprotec. Other formats: please allow 5 days for delivery.
Class 6.1 toxic substances TDG placard: black skull and crossbones and class number 6 on a white 10-3/4 X 10-3/4 in diamond, the placard holder size. This version without a UN box displays the class of the material carried; the version with a blank UN number panel is offered on a separate listing (ECLA6.1UN). Choose low-cost cardboard, reusable high-density rigid plastic or self-adhesive vinyl. Made in Canada and sold individually.