Green nitrile unsupported textured & flock-lined safety glove for chemical protection. 18 in long and 22 mils thick.


Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Green nitrile unsupported glove of a thickness of 22 mils and a total length of 18 in (45.7 cm). This unlined glove features an embossed pattern on the palm of the hand and long cuffs for a chemical protection. Sold in pairs.

These gloves are available in sizes ranging from medium (8) to double extra-large (11). Please select the size needed in the field located above.

This glove is also approved for food handling by the Canadian Food Inspection Agency (CFIA).

This glove meets EN388 standards as for protection against mechanical hazards. This level of protection is expressed by a pictogram followed by four numbers, in this case 4102, where the resistance to abrasion is 4/4, the cut resistance is 1/5, the tear resistance is 0/4 and the puncture resistance is 2/4.

Ansell-Edmont manufacturer’s code: 37-185

GL37185 peculiarities:
In order for the glove to retain a certain grip quality without adhering to object while handling them, most of the palmar surface of the glove has an embossed pattern to offer a good grip on wet or dry objects.

Nitrile properties:
Nitrile is the best alternative to latex since it offers an excellent flexibility, a secure fit and unequalled toughness and comfort. Nitrile is in fact an elastomer synthetized by copolymerizing butadiene with acrylonitrile. This material is quite resistant to domestic products such as ammonia, fertilizers, pesticides, herbicides, paints, solvents, oils, greasy substances and hydrocarbons.

We recommend wearing cotton liners under these gloves to help absorb the moisture generated by perspiration (G218).

Use for:
This glove is recommended for work requiring the use of chemical products, acids, caustics, greasy substances. It may also be used in agri-food and food processing industries, petroleum refineries, car industry, gardening, maintenance, aerospace industry, printing press, furniture manufacturing, electronics industry, etc. These gloves must be kept a room temperature ranging from -4°C and 149°C (25°F and 300°F).

Do not use for:
Nitrile lays down no special restrictions, since it has been designed to address mechanical, chemical and biological risks. It is just a matter of knowing which thickness is suitable for your type of application. The more the glove is thick, the more it offers mechanical and chemical resistance.

Maintenance and service life:
This glove may be reused, but we strongly recommend doing a periodic maintenance to avoid any contamination. To wash your gloves, wear them as if you were working and wash your hands with soap as you do normally. If need be, use bleach to remove stains or more tenacious agents. Please note that to ensure the quality of your product after wash, you must turn your gloves inside out to dry them completely.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryGloves
Sub sub categoryReusable gloves nitrile, rubber, latex, neoprene or PVC
Name of the productNitril glove
Series of productsSolvex (Tm)
Product codeGL37185
Does not include latex or natural rubber componentsDoes not include latex or natural rubber components
Thickness in mils22 mils
Length (in/cm)18 in - 45.7 cm
Inside of the gloveCovered with a thin film of cotton (flocked)
Choice of formatSize medium (8) to double extra-large (11) available
ReusableReusable with prior hygienic measurement
Length (in/cm)10 in / 25.4 cm
Width (in/cm)6 in / 15.24 cm
Height (in/cm)3 in / 7.6 cm
Weight (lb/kg)1 lb/ 0.45 Kg
Sold byPair
Another packaging available1By the dozen (12 pairs)
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page


30 other products in the same category: