compare_arrows
  • New
5-legend TDG flip chart placard, aluminum, 13-3/4 in
search
  • 5-legend TDG flip chart placard, aluminum, 13-3/4 in

5-legend TDG flip chart placard, aluminum, 13-3/4 in

ECLAP5
Made in Canada
$162.50

This item is not kept in stock. Please allow 5 days for delivery.

Flip chart placard with 5 Canadian TDG legends: class 3, class 8, class 2 non-flammable gas, class 2 flammable gas and DANGER. Powder coated aluminum pages, heavy 0.031 in white back plate for wind protection. Base: 13-3/4 X 13-3/4 in; pages: 10-3/4 X 10-3/4 in.

Quantity

Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

5-legend TDG flip chart placard, aluminum, 13-3/4 in

This item is not kept in stock. Please allow 5 days for delivery.

With 5 Canadian TDG legends at your disposal, this placard suits almost any load: class 3, class 8, class 2 non-flammable gas, class 2 flammable gas and DANGER. The pages are made of durable powder coated aluminum with a baked-on polyester finish that resists fading. The heavy 0.031 in white aluminum back plate provides wind protection. The base measures 13-3/4 X 13-3/4 in and each placard page measures 10-3/4 X 10-3/4 in. Recyclable, it is made in Canada and sold individually.

Features of the 5-legend flip chart placard

  • 5 Canadian TDG flip chart legends
  • Classes 3 and 8, class 2 non-flammable gas and flammable gas, DANGER
  • Powder coated aluminum pages
  • Heavy 0.031 in white aluminum back plate for wind protection
  • 13-3/4 X 13-3/4 in base; 10-3/4 X 10-3/4 in pages, recyclable

Applications of the 5-legend flip chart placard

For the delivery driver who mostly carries flammable liquids, corrosive materials or gases, the 5-legend placard displays the right legend by flipping the pages. Its baked-on polyester finish resists fading over the trips.

Care of the 5-legend flip chart placard

Wipe the pages and the back plate with a damp cloth. Before each departure, check that the legend displayed matches the load.

FAQ: the 5-legend flip chart placard

Which legends does it hold?

Five Canadian TDG legends: class 3, class 8, class 2 non-flammable gas, class 2 flammable gas and DANGER.

How does it differ from the 14-legend model?

The 5-legend model groups classes 3 and 8, the two class 2 gas legends and DANGER, with a white back plate. The 14-legend model has 13 Canadian TDG legends plus a blank page.

Is a placard holder included?

The assembly includes its own aluminum base, pages and stainless steel retaining clips. The separately offered aluminum placard holder is intended for single placards; it is not required for this flip-page assembly.

What are its dimensions?

Base: 13-3/4 X 13-3/4 in; placard pages: 10-3/4 X 10-3/4 in.

Where is it made?

In Canada. It is recyclable and sold individually.

Suggestions for this 5-legend flip chart placard

For the fuel and gas delivery driver who switches legends on this placard between stops, plan for a yellow high-visibility Pioneer 6693 surveyor vest (V6693) with 16 pockets, 3M SecureFit 400 safety glasses (YASF407BG) with a gray anti-fog lens for indoor and outdoor use, ultra-thin cut-resistant Tenactiv gloves (GS21TX) to wear alone or as a liner, a 3M 8511 respirator (R8511) N95 with a Cool Flow valve for certain non-oil-based particles during tasks separate from filling, with no protection against gases or vapors and an MSA Super V helmet (TA82) with a 4-point ratchet suspension.

The same placard is also available as a 14-legend model (ECLAP14). To display a single 10-3/4 in placard, see the aluminum placard holder (ECLAP), sold separately. For a single load, the non-flammable gas placard (ECLA2.2), the flammable gas (ECLA2.1) placard and the corrosive (ECLA8) placard, all 10-3/4 in, remain a simple option.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

ECLAP5

Data sheet

Product group
Safety equipment
Main category
Sign and lock
Sub category
Traffic and transport
Name of the product
Placard
Product code
ECLAP5
Sort by keywords
Flip chart placards
Product use
Displaying the TDG legend that matches the load
Country of origin
Canada
Features
5 Canadian TDG legends
Additional Features
Baked-on polyester finish that resists fading
Includes
1 placard
Mounting type
Not published by the manufacturer
Material
Powder coated aluminum
Length (in/cm)
Not published by the manufacturer
Width (in/cm)
13-3/4 in / 34.93 cm
Height (in/cm)
13-3/4 in / 34.93 cm
Weight (lb/kg)
1.84 lb / 0.83 kg
Sold by
Unit
Color
White back plate
Return conditions
No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

You might also like

Comments (0)
No customer reviews for the moment.