3M rechargeable Lithium-Ion high nominal capacity (autonomy of 8 to 18 hours) battery pack for TR-600 Versaflo PAPR

High‑capacity Lithium‑ion Battery 3M Versaflo TR 600

Sold individually. This item may require a delivery delay depending on availability.

3M Manufacturer Code: TR 632

The TR 600 high‑capacity battery is designed to power the Versaflo TR 600 series powered air purifying motors. Thanks to its lithium‑ion technology, it offers superior runtime and consistent performance throughout the workday. It recharges quickly and can be used with compatible 3M chargers. Its robust design allows reliable use in industrial environments where continuous respiratory protection is essential. This battery is ideal for workers exposed to airborne contaminants requiring a high‑performance powered air system, particularly in manufacturing, maintenance, food processing, pharmaceutical, and heavy industry sectors.

This battery was designed for the Versaflo TR‑600 series powered air purifying respiratory protection systems. This battery has a runtime of 8 to 18 hours and fully recharges in 3.5 hours under ideal conditions. It should be noted that this battery must be charged on its corresponding charger; otherwise, the manufacturer does not guarantee its reliability. Indeed, the charging algorithm, amperage, and voltage of each battery differ depending on its chemical composition, which is why each has its own specific charger. It was designed to withstand 250 charge cycles.

This battery is equipped with a charge‑status indicator. Each bar corresponds to a 20% segment, so 5 bars correspond to a charge between 80% and 100%. The charge‑status indicator is calculated based on the actual charge capacity of the battery. The capacity of lithium‑ion batteries decreases slightly with each full charge cycle, which is why after some time your battery may show 4 bars (80%) even though it has been fully recharged. This simply means that the battery has retained, in this example, 80% of its original capacity.

Features of the 3M Versaflo TR 600 High‑Capacity Rechargeable Battery

The TR 600 high‑capacity battery stands out for its long runtime, which can reach up to 18 hours depending on usage conditions. It is equipped with an integrated charge indicator allowing quick verification of the available energy level. Its lithium‑ion technology ensures fast charging, extended lifespan, and stable performance even under intensive use. Designed to withstand harsh environments, it is protected against shocks, vibrations, and temperature variations. It is also compatible with belts, chargers, and motors of the TR 600 series, which facilitates integration into existing respiratory systems.

Installing the 3M Versaflo TR 600 Battery

Installing the TR 600 battery is simple and intuitive. Just insert it into the compartment located at the back of the Versaflo TR 600 motor until it clicks firmly into place. Once installed, the motor’s indicator light confirms power activation. The battery can be easily removed for charging or replacement without additional tools.

Maintenance and Charging of the 3M Versaflo TR 600 Battery

The manufacturer estimates the lifespan at 250 charge cycles. For example, if you use 20% of your battery and then recharge it, the number of cycles counted toward the total lifespan will be proportional to the portion recharged, meaning 20% of a cycle. You can clean this battery with a cloth and mild soap (dish soap). If you wish to decontaminate and immerse it, you may do so using the  RVTR653. cleaning kit. Simply protect the electrical contacts with the sealing caps on the belt, which wraps tightly around the battery. Note that immersion must not exceed 2 feet in depth and must not last more than 2 minutes. This battery is NIOSH certified only when assembled with a Versaflo system. Note that you must never throw a battery in the trash, as it represents a fire or explosion risk and its primary components pose potential environmental hazards. In Quebec, ecocentres are sites where you can dispose of hazardous waste such as batteries. 3M recommends not storing the battery on its charger in order to maximize its lifespan.

Usage Recommendations for the 3M Versaflo TR 600 High‑Capacity Battery

For optimal use, it is recommended to fully recharge the battery before each work shift. The user must regularly check the charge level using the integrated indicator. The battery must be used only with TR 600 series motors and accessories to ensure full compatibility and safe performance. It is particularly suitable for environments requiring long periods of continuous use.

FAQ about the 3M Versaflo TR 600 High‑Capacity Rechargeable Battery

What is the runtime of the 3M Versaflo TR 600 high‑capacity battery?

Depending on the filters and airflow used, runtime varies between 8 and 18 hours.

Is the TR 600 battery compatible with all Versaflo motors?

Yes, it is designed to be used with the powered air purifying motors of the TR 600 series.

Can the TR 600 battery be charged with any charger?

 No, it is recommended to use only compatible 3M chargers to ensure safety and extend battery life.

Complementary suggestions

Need additional safety equipment? See the following items: CDN “Cartridge Respirator Required” sign (ECO106), “Notice: Cartridge Respirator Required in This Area” sign (EOAV328), half-face respirator (R6200), full-face respirator (RFF402), or Airline (RW2929).

See “Accessories” at the bottom of the page. If you're looking for work equipment, have a look at the following products: Facepiece for respiratory protection (RM307), 3M s-Series hood (RS655) and filter panel R256/02/01.

Texts colored green corresponds to hyperlinks leading to specific safety equipment or to a general information link.