Cleaning and storage kit for TR-600 Versaflo PAPR to seal all apertures on motor/blower & electrical contacts on battery

Kit for Cleaning and Storing Versaflo TR 600 3M

Manufacturer Code: TR-653

The Versaflo TR 600 cleaning and storage kit is an essential accessory for maintaining the reliability and safety of 3M powered air purifying respirators. It protects the air inlets, air outlets, battery connectors, and breathing tube fittings during cleaning procedures. Thanks to this kit, the blower unit can be rinsed or submerged without the risk of dust, water, or contaminants infiltrating it. This set allows you to plug the openings of the blower unit, as well as the openings of the battery, in order to clean them by immersing them or to store them for a long period.

This set includes:

• 1 plug and 1 sealing gasket to block the blower unit at the air inlet
• 1 plug and 1 sealing gasket to block the blower unit at the air outlet
• 1 strap to protect the electrical contacts of the battery
• 1 additional sealing gasket for each plug

Blower unit and battery not included. An essential investment for any company wishing to ensure compliant, safe, and durable maintenance of its respiratory equipment.

Particularities of the Versaflo TR 600 Cleaning and Storage Kit

The Versaflo TR 600 kit stands out thanks to its watertight plugs, protective caps, and battery connector cover specially designed for 3M powered respirators. Each component ensures complete sealing to protect the blower unit during washing. This robust design allows thorough cleaning while preserving the integrity of internal components. The kit is perfectly suited for industrial environments where dust, particles, and humidity represent a constant risk for powered respiratory systems.

Installation of the Versaflo TR 600 Cleaning and Storage Kit

Installing the Versaflo TR 600 cleaning kit is simple and intuitive. You only need to place the plugs on the air inlets and outlets of the blower unit, then attach the cover to the battery connector. The caps must then be positioned on the breathing tube connectors to ensure complete protection. Once installed, the kit guarantees total sealing, allowing the device to be handled, rinsed, or submerged safely.

Maintenance of the Versaflo TR 600 Cleaning and Storage Kit

To maintain the effectiveness of the Versaflo TR 600 kit, it is recommended to rinse it after each use and regularly check the condition of the gaskets and caps. Regular maintenance ensures long-lasting protection of the blower unit and helps extend the service life of the powered respirator. The kit should be stored in a clean and dry place to preserve the quality of the materials and ensure optimal long-term performance.

Usage Tips for the Versaflo TR 600 Cleaning and Storage Kit

To optimize the use of the Versaflo TR 600 kit, it is recommended to install it systematically before any cleaning or storage procedure of the powered respirator. It is important to check that all plugs and caps are properly secured before rinsing or submerging the blower unit. The use of cleaning products compatible with 3M equipment is recommended to preserve the materials and avoid premature degradation.

FAQ About the Versaflo TR 600 Cleaning and Storage Kit

Is the Versaflo TR 600 kit compatible with all 3M powered respirators?

It is designed exclusively for the 3M Versaflo TR 600 series powered air purifying respiratory systems.

Can the blower unit be submerged with the kit installed?

Yes, the watertight plugs allow the blower unit to be submerged and rinsed without risk of internal contamination.

Why use a cleaning kit for the Versaflo TR 600 powered respirator?

It protects internal components, facilitates cleaning, prevents contaminant infiltration, and extends the service life of the respiratory system.

Complementary suggestions

Need additional safety equipment? See the following items: CDN “Cartridge Respirator Required” sign (ECO106), “Notice: Cartridge Respirator Required in This Area” sign (EOAV328), half-face respirator (R6200), full-face respirator (RFF402), or Airline (RW2929).

See “Accessories” at the bottom of the page. If you're looking for work equipment, have a look at the following products: Facepiece for respiratory protection (RM307), 3M s-Series hood (RS655) and filter panel R256/02/01.

Texts colored green corresponds to hyperlinks leading to specific safety equipment or to a general information link.