This product is no longer in stock
High-visibility traffic control waterproof raincoat in compliance with the new Transports Québec P4.34.1 standard pertaining to road work signage.
This coat is available in many sizes from extra small (XS) to four extra large (4XL). Select your size in the drop-down menu above.
Pioneer® Product Code: V1190360, model 6037.
This fluorescent yellow flagman raincoat meets the new Transports Québec standard which came into effect in December 2014. It is also meets CSA Z96-15, Class 2 standard requirements if worn alone, and Class 3 standard requirements if worn with matching high-visibility traffic control waterproof safety pants (see item VP19).
This 300-denier oxford polyester safety wear has been lined with polyurethane (PU) to provide water-resistance. The manufacturer grants this product a waterproof rating of 5000 mm, i.e. it can withstand the pressure of a 5 m water column. A waterproof rating is granted when a material has been tested under the pressure of a cylinder filled with water, in this case, 5 m high of water. This height defines the limit at which the material stops being resistant and water starts passing through.
All seams have been taped and heat-sealed. The coat was also fully mesh-lined for more comfort.
Reflective stripes and visibility:
This water-resistant coat has been provided with altering silver retroreflective stripes and fluorescent orange stripes. Each one of them has a width of 50 mm (2 in.). This raincoat has two front vertical stripes, back X-shaped stripes, three horizontal stripes around the waist, and three stripes around each arm. The collar is in a contrasting fluorescent orange.
Fluorescent yellow (or that safety greenish yellow) is quite visible during daylight and in poor natural light conditions, e.g. at dawn or dusk. In most cases, this yellow ensures a high contrast with most backgrounds. Since bright yellow is lighter than orange, it can be perceived more easily at night, yet reflective stripes will always be best in the dark.
Fluorescent orange is quite visible during daylight and in bright artificial lighting conditions. In most cases, it ensures a high contrast with most backgrounds. However, bright orange is less visible at night and in poor lighting conditions, be it natural or artificial, e.g. at dawn or dusk.
Silver retroreflective stripes are the most visible there is in poor lighting conditions, be it natural or
This raincoat features a full front zipper with hook-and-loop plackets on the flap. It also features underarm zippers easily adjusted which maintains comfort during hot weather. There is also a chest pocket with a pen slot, or other small tools, a clear ID pocket, and shoulder radiophone clip strap on each side.
This PU lined oxford polyester raincoat is said to be manufactured with a 300-deniers yarn; in layman’s terms, it is a medium-weight coat which is lightweight enough to offer comfort but is heavyweight enough to offer an effective protection. By definition, 300 deniers refer to the weight in grams of 9,000 m of the yarn used to make this coat, that is, 300 deniers equal 300 g. The manufacturer, Pioneer®, is unable to provide the polyurethane liner’s thickness.
Polyurethane-lined waterproof safety wear is usually worn by workers who may be exposed to remote risks of chemical splashes. PU is lightweight and porous; it’s thus ideal to manufacture light and breathable workwear. Yet, during heavy rains and windstorms, PU tends to get waterlogged and lose all its water-resistant property. Once overloaded, polyurethane lets water leach into the raincoat under any pressure, e.g. by leaning on something or bending over. Given the responsibilities flagmen take, a breathable raincoat is a must.
This raincoat should always be machine-washed in a delicate setting with cold or lukewarm water, and a gentle soap. Never use bleaching agents or fabric softeners on this coat. It should also be air-dried in a sheltered spot out of direct sunlight. Never tumble dry, iron or dry clean this raincoat.
You can obtain the flagging pants under product code VP19. Depending on the season, you can get the summer coats (VV18) or the winter coat (VV56). You may also need other complementary items such as the flag (EFLA17), the stick (EFLAB) or the safety helmet (TA14LRHV). You can find these products by moving your cursor to the bottom of the product page.
|Type of product||Safety equipment|
|Main category||Personal protection|
|Sub category||Safety clothing|
|Sub sub category||Traffic safety clothing|
|Name of the product||High visibility waterproof coat for flagmen|
|Approved/Certified||Complies with standard P4.34.1 issued by Transports Québec - Complies with CSA Z96-15, class 2 and class 3|
|Country of origin||China|
|Choice of format||Size extra small (XS) to 4 extra large (4XL) available|
|Fineness of the knitting||300 deniers|
|Reusable||Reusable with prior hygienic measurement|
|Features||With alternating silver retroreflective and fluorescent orange stripes (50mm / 2" wide). 2 vertical stripes on the front, 2 crossed X stripes on the back, 3 horizontal stripes on the waist and 3 stripes around the arms|
|Additional Features||Equipped with 2 pockets: 1 front pocket to hold pens and other small items and 1 transparent pocket to hold ID cards and a tab on each shoulder to attach a radio transmitter|
|Includes||Closes with a plastic toothed zipper protected by a storm flap that closes with a hook-and-loop closure|
|Waterproof rating||The manufacturer grants this product a waterproof rating of 5000 mm. All seams have been taped and heat-sealed|
|Property of the material||Polyester fiber has the property to retain the coloration|
|Precision on the color of the material and their visibilities||Fluorescent yellow (safety yellow-green) is highly visible during the day and in conditions with little natural light, such as dawn and dusk. In most situations, it also provides high contrast with the background|
|Comfort features||The coat closes with a velcro strap, protected by a flap. Ventilation openings under the arms, adjustable with zippers, allow a better comfort in hot weather|
|Material2||The reflective strips are made of StarTech|
|Washable||Machine wash on delicate with cold or lukewarm water and a mild detergent. Do not use whiteners, bleach, or fabric softener. Air dry. Do not expose to sunlight. Do not machine dry. Do not iron. Do not dry-clean|
|Height (in/cm)||6 in / 15.2 cm|
|Length (in/cm)||12 in / 30.48 cm|
|Width (in/cm)||6 in / 15.24 cm|
|Weight (lb/kg)||2 lb / 0.9 Kg|
|Another packaging available||5 units per box|
|Dimensions of the product||The dimensions of the product depend on the size selected by the customer.|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page|