- New
MSA V-Gard matte white hard hat, Type 1 Class E, 10203081
TA83-W
$18.25
This item is not kept in stock. Please allow 15 days for delivery.
MSA V-Gard 10203081 anti-glare matte white hard hat with a non-vented HDPE shell. Type 1 Class E, Fas-Trac III 4-point ratchet suspension and standard size 6-1/2 to 8. Accessory slots. Sold individually.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
MSA V-Gard matte white hard hat, Type 1 Class E, 10203081
Manufacturer code MSA: 10203081, model 10203081
This item is not kept in stock. Please allow 15 days for delivery.
The MSA V-Gard 10203081 hard hat combines an anti-glare matte white finish with a non-vented high-density polyethylene shell. Its Fas-Trac III ratchet suspension has 4 attachment points and covers the standard 6-1/2 to 8 size range. This Type 1 helmet protects the top of the head against impacts. Its Class E designation concerns protection against electrical contact hazards at the head within the helmet use limitations. Slots allow suitable accessories to be considered after checking the mounting arrangement with MSA.
Features of the MSA V-Gard matte white 10203081 hard hat
- High-density polyethylene shell
- Anti-glare matte white finish
- Type 1, Class E
- Fas-Trac III 4-point ratchet suspension
- Standard size 6-1/2 to 8
Applications of the MSA V-Gard matte white 10203081 hard hat
For construction sites, industrial maintenance and warehouse movement where a Type 1 Class E helmet is required. Certifications are CSA Z94.1-2015 Type 1 Class E and ANSI/ISEA Z89.1-2014 Type I Class E, with third-party SEI certification. Helmet electrical protection does not replace electrical work procedures.
Care of the MSA V-Gard matte white 10203081 hard hat
Before each use, inspect the shell, attachment points and Fas-Trac III suspension. Remove a cracked helmet or one subjected to a significant impact from service. Clean according to MSA instructions and keep the surface accessible for inspection. Store out of direct sunlight and heat. Do not paint or modify the shell without manufacturer authorization.
FAQ: the MSA V-Gard matte white 10203081 hard hat
What does Type 1 Class E cover?
Type 1 concerns impacts on the top of the head. Class E concerns electrical protection at the head. The helmet does not replace other protection and procedures needed for electrical work.
Is the matte white hard hat vented?
No. Model 10203081 has a non-vented shell. Its white finish is matte and anti-glare.
How should the suspension be adjusted?
The Fas-Trac III ratchet suspension covers the standard 6-1/2 to 8 size range. Set the fit before the task and check stability while moving the head.
Can I mount a faceshield and earmuffs?
The helmet has accessory slots. Have the faceshield holder or earmuff attachment checked for the 10203081 before assembling the equipment.
What should I do after an impact to the helmet?
Remove the helmet from service after a significant impact and follow MSA replacement instructions. An intact appearance alone is not enough to resume work.
Suggestions for this MSA V-Gard matte white 10203081 hard hat
For a technician inspecting an installation while wearing this helmet in a fabrication shop, plan for clear anti-fog SecureFit glasses (YASF401BG) and ultrathin TenActiv gloves (GS21TX) for suitable handling tasks. A black Pioneer surveyor vest (V6692N) with pockets accompanies movement. Select the valved 3M 8511 mask (R8511) according to dust exposure. Black and yellow adhesive tape (ECT750) identifies the reserved walkway around the station.
To complete the hard hat, add the MSA replacement ratchet suspension (TA80RS), the elastic chinstrap (TA80CS) and the MSA suspension sweat band (TA451). The MSA holder (YP266) takes the clear MSA faceshield (YV836) to protect the face.
TA83-W
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Safety helmets
- Sub sub category
- Safety Helmets
- Name of the product
- Safety helmet
- Series of products
- V-Gard (Md)
- Product code
- TA83-W
- Sort by keywords
- Safety helmets
- Product use
- Head protection
- Approved/Certified
- CSA Z94.1-2015 Type 1 Class E and ANSI/ISEA Z89.1-2014 Type I Class E
- Manufacturer
- MSA™
- Country of origin
- United State of America
- Type of adjustment
- Ratchet for a quick and precise adjustment
- Type of suspension
- 4 attachment points
- Choice of format
- Standard, 6-1/2 to 8
- Features
- Accessory slots
- Comfort features
- Fas-Trac III suspension
- Includes
- Anti-glare finish
- Class according to CSA
- Class E per CSA
- Vented
- Unvented
- Material1
- High density polyethylene (HDPE)
- Length (in/cm)
- 280 mm / 11.024 in
- Width (in/cm)
- 225 mm / 8.858 in
- Height (in/cm)
- 145 mm / 5.709 in
- Weight (lb/kg)
- 0.82 lb / 0.37 kg
- Sold by
- Unit
- Color
- Matte white
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
This item is not kept in stock. Please allow 15 days for delivery.
MSA V-Gard 10203081 anti-glare matte white hard hat with a non-vented HDPE shell. Type 1 Class E, Fas-Trac III 4-point ratchet suspension and standard size 6-1/2 to 8. Accessory slots. Sold individually.