G310

Horizon™ double palm split-leather and cotton-knit glove equipped with tough cuffs. Men’s one-size-fits-all. Sold in pairs.

$3.75

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Horizon™ high quality double palm split-leather and cotton-knit glove equipped with tough cuffs. Men’s one-size-fits-all. Sold in pairs.

G310 peculiarities:
This glove features a Gunn cut, a design often used by workers from all walks of life because it’s a seamless design with seams only at the top of the hand to allow a better resistance to abrasion, wear and tear. This glove is also made of one sole piece on the palmar side to slow down the wear and tear as well as to avoid to rip the seams. The palmar face and tips of the fingers, the thumb, the index as well as the joints are entirely made of split-leather. The palmar side and the index feature a second layer of split-leather for a better protection from abrasion. The palm is lined with a thin cotton layer to absorb the excess moisture and to provide a better protection against minor mechanical risks. The balance between leather and fabric on this glove enhances one’s dexterity while keeping the glove at a low cost.

Side-split leather properties:
Side-split leather comes from the slitting of thicker hides in two sheets: the surface of the skin, the finest part known as ‘full grain’ is the real leather as opposed to the subsurface, known as split-leather. Split-leather is quite resistant to abrasion, but thicker and may feature a more raw aspect and irregularities.

Use for:
This glove is recommended to workers in the construction and renovations field, woodworkers and parts handling. This model of glove turns out to be quite useful to those who must absolutely protect themselves against abrasion on critical point such as the index and the palm.

Do not use for:
Of course, this glove offers no sure protection against frostbites, heat, cuts, wear, tear and puncture so mechanical risks as well as thermal hazards should not be overlooked.

Maintenance and service life:
It is not recommended to wash this glove since water and soap tend to rob leather of its natural oils which makes it stiffen and become brittle. If the nature of your work requires that you wash them, we recommend that you dry clean them.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryGloves
Sub sub categoryLeather gloves
Name of the productLeather cowhide drivers glove
Series of productsHorizon (Mc)
Product codeG310
ManufacturerBBH Group
type of cuffSafety cuffs
Available sizesSize 9 large only
Inside of the gloveEquipped with a kevlar knit lining
Palmar surface of the hand and index fingerThe palmar side and the index feature a second layer of split-leather for a better protection from abrasion
Back surface of the handCotton and split leather band at the joints
Type of glove cutFitter style glove
FormatFor men
ReusableReusable with prior hygienic measurement
Material1Split-leather
Material2Cotton
Not washableIt is preferable to replace this glove when it is too worn or soiled. Do not attempt to wash them
Length (in/cm)8 in / 20.32 cm
Width (in/cm)5 in / 12.7 cm
Height (in/cm)1 in / 2.54 cm
Weight (lb/kg)0.75 lb / 0.34 Kg
Sold byPair
ColorGrey/Green
Another packaging available1By the dozen (12 pairs)
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

7 other products in the same category: