3M NIOSH 42 CFR 84 approved cartridge for protection from organic vapours, acid gases and a myriad of other gases. These cartridges are compatible with 3M half facepiece and full facepiece respirators series 6000, 7000 and Ultimate-FX (FF-400). Sold in pairs, 30 pairs/case.
3M 6000 series cartridges are made of active charcoal which is one of the most efficient and cost-effective method of filtering airborne contaminants on the market. 3M 6006 cartridges have been designed to protect one from organic vapours such as xylene, benzene, spray paint, pesticides; acid gases such as chlorine dioxide (ClO₂), sulfur dioxide (SO₂), hydrogen fluoride (HF), hydrochloric acid (HCl) and gases such as formaldehyde (CH₂O), ammonia (NH₃) and methylamine (CH₃NH₂). The 6006 cartridges for multigas can protect one from hydrogen sulfide (H₂S) for a limited time. Without the right equipment, H₂S is extremely hazardous. These cartridges are meant to protect one in case of emergency evacuation due to a release of hydrogen sulfide. One must of course, throw away the cartridges exposed to that gas. CAUTION: 6006 cartridges don’t protect one from carbon monoxide (CO) and carbon dioxide (CO₂). If one has to work in an environment that may contain those two gases, one has to find another way to protect himself.
This type of cartridge is ideal for chemical and petrochemical manufacturing, mines and primary metals manufacturing.
Do not use for:
Do not use on a beard and other facial hair or if the user suffers from a condition that prevents him from having direct contact with the respirator’s sides. One should never use a respirator regardless of the type of cartridge in use whenever concentrations of gases and vapours exceed 10 times the admissible limit set by the CNESST or any other regulation applicable. Avoid sandblasting and oxygen deprived environments (an atmosphere with less than 19,5 % oxygen).
Maintenance and service life:
Studies have shown that in case of contaminant mixture, all vapours are absorbed simultaneously by the granulated charcoal inside the cartridges. One must take into account the presence of a contaminant mixture since the most volatile solvent will saturate the cartridge. The cartridge service life and one’s degree of protection will then depend on the concentration and the nature of the contaminants in the air.
One may store its cartridges in an airtight bag or container since even when not in use, the cartridge absorb whatever contaminant there may be in the air.
Since this is a disposable product, there is no maintenance. The manufacturer’s limitations must be followed.
|Type of product||Safety equipment|
|Main category||Personal protection|
|Sub category||Respiratory protection|
|Sub sub category||3M respirators and cartridges|
|Name of the product||Cartridge|
|Series of products||Rugged Comfort, 6500, 7800S, 6000, 7500, 7000, FF-400|
|Country of origin||United State of America|
|Type of connection||Bayonet type connector|
|Maintenance free||Disposable product|
|Protection against gases and vapors||Protects against organic vapours, chlorine, chlorine dioxide (ClO₂), hydrogen chloride (HCl), hydrogen fluoride (HF), sulfur dioxide (SO₂), ammonia (NH₃), methylamine (CH₃NH₂) and formaldehyde (CH₂O)|
|Cartridge color code||Olive|
|Carbon filter||With carbon filter|
|Height (in/cm)||1.5 in / 3.81 cm|
|Length (in/cm)||7.25 in / 18.4 cm|
|Width (in/cm)||4.25 in / 10.79 cm|
|Weight (lb/kg)||0.5 lb / 0.22 Kg|
|Sold by||1 pack (2 units)|
|Another packaging available1||60 units per case (30 pairs)|
|Another packaging available2||7200 units per pallet (3600 pairs)|
|Useful life||1825 Days|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.|
No customer reviews for the moment.