R7502

3M 7500 series NIOSH approved respirator. Lightweight and comfortable. Filter & cartridge not included. Medium.

$51.85

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

3M 7500 series NIOSH 42 CFR 84 approved hald facepiece respirator for respiratory protection. Compatible with 3M filters series 2000, 2200, 5000 and 7000; 3M cartridges series 6000; and P100 cartridge/filters. Filters and cartridges sold separately. This code is for the medium size respirator. Sold individually. 10 units/case.

This half facepiece faceseal is made of silicone. The head harness is equipped with four ajustable head straps. This half facepiece has been design to facilitate work with its low position on the bridge of the nose and the fact that it is lightweight and allows one to wear safety glasses and still be comfortable. None of the components contain natural rubber latex. 7500 series respirators are equipped with a Cool Flow valve which eases breathing. This particular model may be configured in "drop down" mode which allows workers to remove their respirator without taking off all their gear to moe the head harness.

Use for:
This type of respiratory protection is recommended for work that will loosen solid or liquid particles in the air and/or for work in an environment where air contains contaminants and/or biological particles. One must of course adapt its filtering system with the right filtres or cartridges to be properly protected.

Do not use for:
Do not use on a beard and other facial hair or if the user suffers from a condition that prevents him from having direct contact with the respirator’s sides. The use of respirators is not recommended for people with compromised respiratory system or problem such as asthma or emphysema.

It is strongly discouraged to wear a respirator for application with sandblasting. It is also highly advised to stay away from environment that exceed 10 times the permissible exposure limit set by the CNESST or any other government regulation applicable.

One should never use a respirator in an oxygen deprevated environment (an atmosphere with less than 19,5 % oxygen).

Maintenance and service life:
3M half facepiece respirators 7500 series are reusable, provided that its maintenance and storage is done according to the manufacturer’s rules. 3M recommends an inspection of the respiratory equipment before each use; to wash the respirator after each use; and to store the respirator back to its packaging. One should never wash its respirator with any type of solvents since they can weaken some components which can affect the efficiency of the equipment. One must always remove the cartridges or filters from the respirator before storing it.

Other sizes are available in the menu below this page.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryRespiratory protection
Sub sub category3M respirators and cartridges
Name of the productHalf-mask type respirator
Series of products7500 series respirator
Product codeR7502
Product useRespirator with protection factor 10 and accessories
Approved/CertifiedMeets NIOSH
Manufacturer3M
Country of originUnited State of America
Choice of formatSmall, medium , large
ReusableReusable with prior hygienic measurement
Type of connectionBayonet type connector
Protection factorProtection factor of 10
Respirator sizeMedium size
Cartridge or Filter IncludedFilter element not Include
Includes natural rubber latex componentsDoes not contain latex
Contains a braided strap for comfortContains a braided strap (large)
Contains adjustable buckle strapsContains adjustable buckles
Exhalation valveContains a Cool flow valve (Tm) 3M (Tm)
Compatibility with the mask screen used for weldingNot compatible with the mask screen used for welding
Sliding strapsSliding straps
Inhalation valveContains two inhalation valves
Phonic membraneWithout phonic membrane
Type of harness4 attachment points
Material1Silicone
Material2Nylon
Material3Elastic
WashableWash in warm water, 140°F/60°C with a mild soap (hand dish soap), rinse and disinfect with a Dakin solution (water with bleach), rinse thoroughly and let dry
Length (in/cm)9 in / 22.8 cm
Width (in/cm)7 in / 17.8 cm
Height (in/cm)4 in / 10.1 cm
Weight (lb/kg)0.38 lb / 0.172 Kg
Sold byUnit
ColorGrey/bleue teal
Another packaging available1Box of 10
Another packaging available249 cases per pallet (490 units)
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

30 other products in the same category: