TenActiv™ cut-resistant ASTM/ANSI level A9 composite-knit glove with foam nitrile coating. Sold in pairs.

ANSI A9 TenActiv™ composite cut-resistant glove, 21 gauge, foam nitrile coated, sold in pairs

The TenActiv™ cut-resistant glove (Superior code S21TXUFN) delivers one of the highest levels of cut protection in the industry, ANSI/ASTM level A9, in an ultra-thin 21-gauge knit that gives a barehand feel. The palm and finger backs are coated with a thin foam nitrile that provides a firm, steady grip even on lightly oiled parts, while staying touchscreen compatible. FDA compliant for safe food handling, it combines maximum protection with dexterity and versatility. Sold in pairs, available from size XXS (5) to 3XL (12).

Video demonstration:

▶ Click to watch the video

TenActiv™ composite fibre: knit thinness and high cut resistance

TenActiv™ fibre is a Superior Glove trademark known for its outstanding thinness-to-protection ratio: it enables a very fine knit (21 gauge) that preserves dexterity while reaching cut level A9, one of the highest available. Unlike the leather-reinforced model, this all-composite version stays supple and light across the whole hand, making it a versatile glove, ideal for the toolbox as well as for production work.

Benefits of the A9 TenActiv composite 21-gauge cut-resistant glove

This glove combines maximum protection with everyday working comfort:

• Cut resistance of ANSI/ASTM level A9 (the highest), with abrasion level 3 and puncture level 3.
• FDA compliant for safe food handling.
• Ultra-thin 21-gauge knit for near-barehand dexterity.
• Foam nitrile coating (palm and finger backs) for a secure grip on dry or lightly oiled parts.
• Touchscreen compatible.
• Latex-free and silicone-free.
• Mottled grey/black colour that hides dirt; washable and reusable.
• Available in all sizes, from XXS (5) to 3XL (12).

Job sites and industries where this glove is required

• Labouring and construction.
• Processing industries and assembly lines.
• Handling of metal, glass and sharp materials.
• Pulp and paper industry.
• Food handling (FDA compliant).
• Warehouse work and material handling.

Usage restrictions of the nitrile-coated composite glove

The composite fibre offers low heat resistance and the nitrile foam has low flame resistance: this glove is not intended for hot work. Like any glove, it cannot fully eliminate the risk of cuts or lacerations. Because the nitrile foam is porous and the coating is partial, the glove is not designed to be immersed in liquids.

Care and service life of the TenActiv cut-resistant glove

Basic care extends the life of your gloves: wash in cold water (85°F / 30°C) with a mild detergent, rinse in cold water, then let dry. Before each use, inspect the glove for deep cuts and wear of the nitrile foam, and remove from service any damaged glove that no longer provides the stated level of protection. The mottled grey colour hides stains well.

FAQ about the A9 TenActiv composite cut-resistant glove

What is this glove's cut resistance level?

It reaches ANSI/ASTM level A9, one of the highest in the industry against cuts, along with level 3 abrasion and level 3 puncture resistance.

Is this glove suitable for food handling?

Yes. It is FDA compliant for safe food handling, which allows its use in food-processing environments.

Is the glove touchscreen compatible?

Yes. The foam nitrile coating is designed to remain touchscreen compatible, so you can use a phone or tablet without removing the glove.

Can it be used for hot work or immersed in liquid?

No. The composite fibre has low heat resistance and the nitrile foam has low flame resistance. In addition, the coating is partial and porous: the glove is not intended for immersion in liquids.

What sizes is this glove available in?

It is available from size XXS (5) to 3XL (12) and sold in pairs. Select your size in the box at the top of the page.

Complementary suggestions for your cut protection

To pick the protection best suited to your task, compare with the A9 version reinforced with goat leather at the thumb-index crotch, the TenActiv Dexterity Pro reinforced glove (GS21TXUFNLTC), the thin TenActiv model worn alone or as a liner (GS21TX), the high-visibility version (GS21TXUGFN), and the TenActiv glove with impact protection (GSTXFNVB).

Under "Accessories" at the bottom of the page, complete your choice with the A7 TenActiv reinforced-thumb glove (GSTACXPNRT), the A4 waterproof winter cut-resistant glove (GS18WTFN), the A5 Emerald CX winter model with PVC coating (GSCXTAPVC), and the A3 Dexterity glove in Kevlar composite (GS18KGFN).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.