compare_arrows

High-visibility anti-slip treads 6 X 24 in, pack of 10

Reference : ECTBA6HV
$155.75

This item is not kept in stock. Please allow 5 days for delivery.

Pack of 10 black 6 X 24 in anti-slip treads with a high-visibility yellow stripe, to make steps, floors, platforms and equipment safer and more visible. Their 60 grit surface reduces slip risk, the stripe printed below the grit resists wear, and the rounded corners prevent lifting. The acrylic adhesive bonds to clean, dry surfaces, indoors and outdoors, and resists water, chemicals and oil.

Quantity

Compare

High-visibility anti-slip treads 6 X 24 in, pack of 10

Manufacturer code Incom Direct: SG3126BHV

This item is not kept in stock. Please allow 5 days for delivery.

These pre-cut anti-slip treads reduce the risk of slips on steps, platforms, floors and equipment surfaces, while marking the edge of the area. Their black 60-grit surface provides lasting traction, and a yellow high-visibility strip draws the eye to the edge of the step. This strip is highly visible by day and under normal lighting, but it is not reflective. It is printed under the grit surface, which protects it from wear, and the rounded corners keep the treads from lifting or fraying. The acrylic adhesive holds them on clean, dry surfaces; resistant to water, chemicals and oil, they suit indoor and outdoor use. Made in Taiwan, they are sold in packs of 10 treads of 6 X 24 in.

Features of the high-visibility anti-slip treads

  • 60-grit anti-slip surface with a yellow high-visibility strip.
  • Strip printed under the grit, for visibility that resists wear.
  • Rounded corners that prevent lifting and fraying.
  • Strong acrylic adhesive for clean, dry surfaces.
  • Resistance to water, chemicals and oil, indoors and outdoors.

High-visibility anti-slip tread applications

For the nosings of a plant stairway, machine platforms, walkways, ramps and well-lit equipment surfaces, wherever traction and marking the edge matter. The manufacturer designs them for commercial, industrial and specialty installations, including original equipment (OEM) and long-term installations. High visibility does not mean retroreflection: for a poorly lit stairway or dock, where the strip must send back the light of a flashlight or headlights, choose the reflective anti-slip treads (ECTBA6REF) 6 X 24 in, pack of 10.

High-visibility anti-slip tread technical specifications

FeatureDetail
Sylprotec codeECTBA6HV
Manufacturer code Incom DirectSG3126BHV
MaterialPVC film and aluminum oxide grit
Grit60
Dimensions6 X 24 in (15.24 X 60.96 cm), rounded corners
Thickness0.80 mm (about 31.5 mil) for the grit tape and adhesive, excluding the release liner
ColourBlack with yellow strip
Visibility functionHigh-visibility strip, not reflective
AdhesiveAcrylic, for clean, dry surfaces
ResistanceWater, chemicals and oil
UseIndoor and outdoor
Tests and compliance stated by the manufacturerNFSI 101-A "High Traction" certification; meets or exceeds OSHA 1910.24 and 1910.26, ANSI A137.1/A326.3 (dynamic coefficient of friction, dry and wet) and AS/NZS 4586 (pendulum test, dry and wet)
Country of originTaiwan
Sold byPack of 10 treads

Anti-slip tread installation and care

Clean and degrease the surface, then let it dry: the acrylic adhesive requires a clean, dry substrate. Place the tread where needed, with the yellow strip on the side to be marked, then press it firmly over its whole surface, pressing hard on the rounded corners. Clean the treads regularly to keep the grit effective and the strip visible, and replace a worn or lifting tread.

FAQ: high-visibility anti-slip treads

How many treads are in the pack?

The pack holds 10 treads of 6 X 24 in, black with a yellow high-visibility strip.

Can they be applied outdoors?

Yes. The manufacturer states they resist water, chemicals and oil, for indoor and outdoor use.

Which standards and tests does the manufacturer state?

The manufacturer states NFSI 101-A "High Traction" certification and that the treads meet or exceed OSHA 1910.24 and 1910.26, the ANSI A137.1/A326.3 dynamic coefficient of friction test, dry and wet, and the AS/NZS 4586 pendulum test, dry and wet.

Is the high-visibility strip reflective?

No. It is highly visible by day and under normal lighting, but it does not send light back like a reflective strip. Both versions have the same 60-grit surface, the same format and the same pack of 10; for retroreflection, choose the reflective version (ECTBA6REF).

What surfaces can they be applied to?

Clean, dry surfaces: steps, platforms, floors and equipment. Clean and dry the substrate before application.

Suggestions for the high-visibility anti-slip treads

For the attendant who applies the treads to the steps of a plant stairway and to machine platforms, plan for the Impacto (VG101) flexible hard shell knee pads with breathable lining, the affordable (G308) split leather and cotton knit gloves with safety cuffs, the 3M Solus (YAS1101) S1101SGAF safety glasses with clear anti-fog lens, the economical (VV49) one-size fluorescent orange traffic vest and the Dunlop (VC18820) waterproof white PVC boots with steel toes and anti-slip soles on wet surfaces.

Three useful additions for installation on steps are: yellow and black anti-slip tape (ECT749JN), red and white self-adhesive warning tape (ECT750R) and 25 in wet floor warning sign (ETR01). Select them according to the layout and hazards present.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

ECTBA6HV

Data sheet

Product group
Safety equipment
Main category
Sign and lock
Sub category
Cones and barricade tapes
Name of the product
Anti-slip tread
Product code
ECTBA6HV
Sort by keywords
Marking tapes
Product use
Floor marking
Approved/Certified
NFSI 101-A « High-Traction » ; OSHA 1910.24 ; OSHA 1910.26 ; ANSI A137.1/A326.3 (Dry & Wet) ; AS/NZS 4586 (Dry & Wet)
Manufacturer
Incom Direct
Country of origin
Taiwan
Thickness in mils
31.5 mils
Features
To make steps, floors and equipment slip-resistant and visible
Additional Features
Rounded corners
Characteristic adding safety
High-visibility strip
Mounting type
Permanent adhesive back
Material1
Aluminum oxide
Material2
Chlorinated polyvinyl (PVC)
Material3
Acrylic
Length (in/cm)
24 in / 60.9 cm
Width (in/cm)
6 in / 15.24 cm
Height (in/cm)
0.04 in / 0.10 cm
Weight (lb/kg)
2.2 lb / 0.99 kg
Sold by
Pack of 10 units
Color
Black/Yellow
HS Code
6805301000
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Caution
For indoor and outdoor use

Specific References

MPN
SG3126BHV

You might also like

Comments (0)
No customer reviews for the moment.