Childers blue permanent encapsulation - asbestos removal 20L/5 gal(US)

Foster Childers permanent asbestos encapsulant blue 20 L / 5 gallons

The professional solution for long-lasting containment for your asbestos abatement projects, choose a reliable, durable, and standards-compliant solution. The Foster Childers blue 20 L permanent encapsulants is specifically designed to seal asbestos-containing materials, both indoors and outdoors. Its water-based paste formula ensures easy application and long-lasting protection against the release of hazardous fibers.

Special features of Foster Childers blue encapsulants :

The Foster Childers CP-211-3 permanent encapsulants is a water-based, blue-colored product designed to seal asbestos-containing materials. It forms a continuous film with a thickness of 6 to 10 mils (0.15 to 0.25 mm) that prevents the release of asbestos fibers into the air. This product is recommended when asbestos must remain in place, particularly on pipes, ducts, joints, or already encapsulated surfaces.

It can be applied to a wide variety of substrates, whether porous or non-porous, and withstands temperatures ranging from -29°C to 93°C. Its fire-retardant formula is ASTM E84 class A certified. It provides coverage of 40 to 46 sq. ft. per gallon, depending on the porosity of the surface.

Other characteristics and limitations of the permanent encapsulants :

• Do not apply outdoors on surfaces with a slope greater than ½ inch per linear foot
• Do not use on floors
• This is a water-based product, therefore low in VOCs (volatile organic compounds)
• Do not apply on surfaces below 4˚C (39˚F) or on surfaces likely to exceed 93˚C (200˚F)
• Store in a frost-free environment, not exceeding 38˚C (100˚F); 25˚C (77˚F) is the recommended temperature for more information, please refer to the attached product data sheet in PDF format (English only).

For further information, please consult the attached product sheet in PDF format.

How to apply Foster Childers asbestos encapsulants ?

Before applying the permanent asbestos encapsulants, ensure the surface is clean, dry, and free of contaminants. The product must be used undiluted. It can be applied using a brush, roller, trowel.

Apply an even coat over the entire surface. Drying time varies depending on thickness, ambient temperature, and humidity. Once dry, the film is flexible, resistant, and durable.

How to store encapsulants after use ?

The Foster Childers encapsulants should be stored in its original container, protected from freezing, and at a temperature not exceeding 38°C (ideal storage at 25°C). Reseal the bucket tightly after each use to prevent evaporation or contamination. Do not apply on surfaces sloped more than ½ inch per linear foot or on floors.

Tips for successful asbestos encapsulation :

Use the Foster Childers blue asbestos encapsulants in a well-ventilated environment and wear appropriate personal protective equipment (P100 respirator, gloves, coveralls). Apply the product to asbestos-containing materials that cannot be removed to stabilize them permanently. Avoid applying the product at temperatures below 4° C or on surfaces that may exceed 93°C.

Frequently asked questions about asbestos encapsulants :

Is this asbestos encapsulants suitable for outdoor use ?

Yes, Foster Childers blue is designed for both indoor and outdoor asbestos abatement work. It withstands temperature variations and forms a durable protective film against asbestos fibers.

Can this product be applied to a previously encapsulated surface ?

Yes, this encapsulants is compatible with surfaces that have already been treated. It adheres effectively to most materials, even those previously encapsulated, to reinforce the asbestos barrier.

What is the coverage of a 20-liter bucket ?

A 20 L (5 US gal) bucket covers between 185 and 210 sq. ft. (approximately 17 to 19.5 m^²), depending on the thickness applied and the porosity of the material. This makes it a cost-effective and high-performance choice for large-scale asbestos abatement projects.

Suggested complementary products for Foster Childers asbestos encapsulants:

Need additional safety equipment? See the articles; Safety Liberty hard hat (TA14LR), Omega II minor hard hat type 1 (TA14FS), motorized respirator with 1000 protection factors (R6800PF), 3M  mask protection film (R6885).

Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51), containment fabric (SACTT2) or (SAH2MA) air cleaner.

The texts colored in green correspond to hyperlinks leading to specific safety equipment or to a general information link.