First stage filter for particles 20 um and more, designed for the filtration pump

Decontamination filter designed for hazardous environments

First stage filter for particles 20 µm or bigger. Designed for the filtration pump unit that goes on the 1658-3421 series TeleShower (SAH6) for asbestos decontamination.

The Teleshower primary filter for 20 µm particles is specifically designed for filtration pumps used in asbestos decontamination showers. It forms the first stage of the filtration process, capturing particles of 20 µm and larger found in wastewater. This filter plays a key role in retaining asbestos fibers and other contaminants before the secondary filter takes over for finer particles. Its robust design and compatibility with Teleshower systems make it a reliable choice for asbestos removal professionals.

Most particles smaller than 20 µm travel through the first filter to be filtered by the second filter (SAH6PFS), which captures particles the size of 5 µm and bigger.

Efficiency and safety guaranteed technical.

Features of the Teleshower primary filter:

This decontamination filter is designed to capture particles of 20 microns and larger. It integrates perfectly with the Teleshower filtration pump and model SAH6P, and works in tandem with the secondary filter for maximum efficiency. Its structure enables two-stage filtration, reducing saturation risks and extending the system’s lifespan. This filter is non-returnable once used, due to the potential presence of asbestos fibers.

Installation of the primary filter for the Teleshower pump:

Installing the Teleshower primary filter is simple and quick. It only needs to be inserted into the designated compartment of the SAH6P filtration pump. It is essential to follow safety instructions during handling, including wearing appropriate personal protective equipment. Proper attachment ensures optimal sealing and consistent filtration performance.

Maintenance of the 20 µm primary filter for decontamination shower:

After use, the filter contains hazardous particles, including asbestos fibers. It must, therefore, be removed with care and disposed of according to contaminated waste management protocols. It is recommended to replace the filter regularly to maintain the filtration system’s effectiveness. Thorough maintenance of the pump and its components extends the equipment’s lifespan.

Safe use of the Teleshower decontamination filter:

This filter is intended for professionals working in areas contaminated by asbestos. It must be used exclusively with the Teleshower SAH6P pump and within a strict decontamination protocol. Compliance with safety standards and proper installation and removal procedures is essential to ensure optimal protection for users and the environment.

FAQ – primary filter for 20 µm particles Teleshower:

What is the main function of the Teleshower primary filter?

It captures particles of 25 µm and larger in wastewater from decontamination showers, ensuring an effective first stage of filtration.

Is this filter compatible with all decontamination systems?

No, it is specifically designed for the Teleshower filtration pump model SAH6P.

How should a used filter containing asbestos fibers be disposed of?

It must be handled with care and disposed of according to hazardous waste management protocols, in compliance with current regulations.

Additional suggestions for filtration pump for asbestos decontamination:

Need additional safety equipment? See the articles; Safety hard hat (TA14LR), Okanagan minor hard hat type 1 (TA14FS), a motorized respirator with 1000 protection factors (R6800PF) and a 3M  mask protection film (R6885).

Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51), containment fabric (SACTT2) or (SAH2MA) air cleaners.

The texts colored in green correspond to hyperlinks leading to specific safety equipment or to a general information link.