First stage filter for HEPA-AIRE (SAH5). 18 X 24X 0.5 in filter for particles 10 micron

10 µm particle filtration – A professional solution for air purification

Primary filter for the HEPA-AIRE® (SAH5)or any other model of air scrubber, which requires an 18 in X 24 in X 0.5 in filters. Sold by the pack of 50 filters.

This filter, sized 18 X 24 X 0.5 inches, is a vital component of the HEPA-AIRE filtration system. It traps large airborne particles while allowing finer ones to pass through and be captured by subsequent stages of the air purifier. Its 75% capture efficiency of 10 µm particles, certified by its MERV 4 rating according to ASHRAE standards, makes it an ideal choice for decontamination sites, industrial workshops, and spaces with high contaminant density.

Please note that once the packaging has been opened, we cannot accept returns or exchanges.

Efficient capture of 10 µm particles for exceptional air quality.

Features of the electrostatically charged primary filter HEPA-AIRE SAH5:

This disposable air filter is crafted from electrostatically charged fiberglass, a material known for its ability to attract and retain airborne particles. It is compatible with HEPA-AIRE SAH5 air purifiers and any unit that accommodates the 18 X 24 X 1 format. Packaged in sets of 50 units, it offers an economical and reliable solution for professionals.

Easy installation of the HEPA-AIRE primary filter:

In operating installations, the machine is left running during the replacement of the primary and secondary filters. Installing the HEPA-AIRE filter in your device requires no technical expertise. Simply remove the used filter from the purifier’s compartment, insert the new one following the direction of airflow, and close the compartment. Its standard dimensions ensure a perfect fit and immediate performance once the system is activated.

Maintenance and replacement of the MERV 4 HEPA-AIRE filter SAH5FP:

Being disposable, this filter’s maintenance consists of regular replacement. Depending on the concentration of airborne contaminants, it should be changed every 8 to 72 hours or as indicated by your purifier. Regular replacement maintains system efficiency and prevents overload on secondary and HEPA filters.

Practical tips for optimal use of the HEPA-AIRE filter:

Use this filter in environments with high particle pollution: construction zones, painting workshops, or technical facilities. Store unused filters in a dry, clean area. Never reuse a used filter, as it compromises air quality and purifier performance.

FAQ – Everything You Need to Know About the HEPA-AIRE Primary Filter for 10 µm Particles:

What is the recommended usage duration for the HEPA-AIRE SAH5 primary filter?

The recommended duration ranges from 8 to 72 hours, depending on environmental contamination levels or alerts issued by the air purifier.

Is this filter compatible with models other than the SAH5?

Yes, as long as the purifier supports filters sized 18 X 24 X 0.5 inches, this filter can be used effectively.

Is the primary filter recyclable or reusable?

No, this filter is disposable.

Suggested complementary products for the HEPA-AIRE filter SAH5FP:

Need additional safety equipment? See the articles; Safety hard hat (TA14LR), Okanagan minor hard hat type 1 (TA14FS), a motorized respirator with 1000 protection factors (R6800PF) and a 3M  mask protection film (R6885).

Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51), containment fabric (SACTT2) or (SAH2MA) air cleaners.

The texts colored in green correspond to hyperlinks leading to specific safety equipment or to a general information link.