- New
This item is not kept in stock. Please allow 5 days for delivery.
Engineer-grade reflective tape, 2 in X 30 ft, to make bollards, posts, racking, loading docks and other obstacles visible day and night. Available in white, red, yellow or orange, or in yellow/black or red/white stripes. Its microprismatic acrylic film reflects light evenly from every angle, and its permanent pressure-sensitive adhesive applies to clean, smooth surfaces. Complies with ASTM D-4956 Type I and EN 12899-1 Class 1.
This item is not kept in stock. Please allow 5 days for delivery.
Available colours: 4 solid colours and 2 striped patterns, 2 in X 30 ft roll
Available in 6 colours. Select the variant you need from the drop-down menu.
| Sylprotec code | Manufacturer model | Colour |
|---|---|---|
| ECTREF-BC | RST101 | White |
| ECTREF-RG | RST102 | Red |
| ECTREF-JA | RST104 | Yellow |
| ECTREF-OR | RST105 | Orange |
| ECTREF-JN | RST106 | Yellow/Black |
| ECTREF-RB | RST107 | Red/White |
This reflective tape makes obstacles and hazard areas visible: parking bollards and curbs, posts, warehouse walls and racking, guardrails, loading docks and poorly lit areas. It is made of a high-gloss acrylic film whose microprisms, set in several orientations, send the light that strikes them back toward its source, uniformly whatever the application angle. By day, its bright colour marks the obstacle; at night, it shines as soon as headlights, a flashlight or building lighting fall on it. Its permanent pressure-sensitive adhesive applies directly to a smooth, clean surface. The roll measures 2 in X 30 ft (5.08 cm X 9.14 m). It meets ASTM D-4956 Type I and EN 12899-1 Class 1, and is made in the United States.
The manufacturer recommends it for parking bollards and curbs, posts, warehouse walls and racking, loading docks and freight terminals, guardrails and poorly lit corners, as well as perimeter marking. It is useful wherever forklift or vehicle headlights, or a flashlight, light up the obstacle. The solid colours mark an obstacle; the yellow/black and red/white stripes signal a hazard on machinery, docks and rack uprights. Its durability is established for vertical exposure only: for floor marking, choose a floor tape instead, such as the yellow/black striped heavy-traffic floor marking roll (ECTHDJN), 2 in X 100 ft. This tape is not presented as a vehicle conspicuity tape.
| Feature | Detail |
|---|---|
| Construction | High-gloss microprismatic retroreflective acrylic film; diagonal stripes for the yellow/black and red/white patterns |
| Adhesive | Permanent, pressure-sensitive, covered by a polypropylene liner |
| Film thickness | 0.005 in (5 mil nominal); typical thickness 4.5 to 5.5 mil (114 to 140 μm) |
| Dimensions | 2 in X 30 ft (5.08 cm X 9.14 m) |
| Colours | White, red, yellow, orange, yellow/black stripes, red/white stripes |
| Compliance | ASTM D-4956 Type I; EN 12899-1 Class 1 |
| Durability | Up to 7 years in white, red, yellow and both striped patterns; up to 3 years in orange; vertical exposure only |
| Service temperature | -10 °F to 150 °F (-23 °C to 65 °C) |
| Minimum application temperature | 65 °F (18 °C) |
| Storage | 1 year after purchase, between 65 and 75 °F (18 to 24 °C), 50% ± 5% relative humidity |
| Country of origin | United States |
| Sold by | Roll |
Apply the tape to a smooth, clean, dry surface at a temperature of at least 65 °F (18 °C). Remove the liner as you go and press the tape firmly along its whole length, following the shape of curved surfaces. Store rolls between 65 and 75 °F (18 to 24 °C) at 50% ± 5% relative humidity, and use them within a year of purchase. Clean the tape so it keeps its reflectivity, and replace it if damaged.
Choose a solid colour, white, red, yellow or orange, to mark an obstacle according to your internal signage code, and a yellow/black or red/white striped pattern to signal a hazard. All six choices are selected from the drop-down menu on this page.
No. It does not produce light: its microprisms send the light of headlights, a flashlight or building lighting back toward its source. In complete darkness, with no light aimed at it, it cannot be seen.
The manufacturer states a durability of up to 7 years for white, red, yellow and both striped patterns, and up to 3 years for orange, in vertical exposure only.
Its durability is established for vertical exposure only. For floor marking, choose a floor tape instead, such as the yellow/black striped heavy-traffic floor marking tape (ECTHDJN), 3 in X 100 ft.
It meets ASTM D-4956 Type I and EN 12899-1 Class 1. Check the requirements of the local authority for your application.
For the attendant who applies the tape to posts and dock edges in a warehouse, plan for the MSA Super V (TA82) safety helmet, type 2 class E, the Endura (G301) smooth cowhide and cotton work gloves, the 3M Virtua (YA11872) Max 11872 safety glasses with foam gasket, the Pioneer (V6692) 6692 high-visibility orange surveyor's vest with 16 pockets near forklifts, and the steel toe (VC8019) guards with adjustable straps on the docks.
To complement your equipment: Kleton steel safety bollard, 4-1/2 in diameter, yellow (EBKI293); Eagle HDPE column protector, yellow (PC17XX) and Kleton steel rack upright protector, safety yellow (EXXXXXX).
Data sheet
Specific References
You might also like