Superior Touc® cut-resistant ASTM/ANSI level A5 knit gloves with Dyneema composite fiber and foam nitrile coating


Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Superior Touch® 13-gauge extreme cut-resistant Dyneema® composite knit work gloves with foam nitrile palm coating. Sold in pairs.

Superior manufacturer’s code: S13FGFNT

These gloves are available in sizes from extra-small (6) to triple extra-large (12). Select the size from the menu above.

This glove has a puncture resistance level 4 and a cut resistance level A5 and an abrasion resistance level 4 according to ASTM and ANSI standards.

GS13FGFNT features:
These gloves combine high resistance to cuts, puncture and abrasion while providing great comfort, high dexterity and a no-slip grip on wet and dry objects. Their composite fibre blends high-strength filament, cut-resistant Dyneema® and tough nylon. The seamless fine knit is elastic, flexible, and breathable. These gloves feature an ergonomic cut that follows the natural curve of the hands and fingers and helps reduce fatigue.

Dyneema® properties:
Dyneema®, also called ultra-high-molecular-weight polyethylene (UHMWP), on an equal weight basis, is 15 times more resistant to abrasion than steel, and twice as resistant as Kevlar®. Of all thermoplastic compounds, Dyneema® is by far the best material for protection against abrasion and impact. Dyneema® features excellent chemical and moisture resistance. Unlike Kevlar®, Dyneema® is also resistant to UV light. Dyneema® also offers outstanding protection against mechanical risks such as wear, abrasion and elongation.

Nitrile foam properties:
Nitrile foam has similar properties to plain nitrile, including good chemical resistance and tactile feedback. Its rough texture increases grip on smooth objects and provides an excellent grip on wet or oily objects. Nitrile foam also offers better protection than comparable latex foam.

Nitrile foam disadvantages include a small loss of elasticity compared to plain nitrile due to the presence of various vulcanizing and foaming additives and its permeability caused by the presence of micropores. Nitrile foam does not protect against liquid and liquid-borne hazards such as body fluids, blood-borne pathogens, viruses, etc.

Recommended for:
These cut-resistant no-slip gloves are recommended for workers who handle sharp objects or tools such as workers in the metal stamping and fabrication sector including sheet metal and sharp steel, workers in the glass industry, workers who handle circuit boards, and workers in the automotive and aerospace industry.

The Dyneema®-based composite fibre used for this glove is not heat-resistant. Foam nitrile is not flame-resistant. The foam nitrile coating is porous to liquids over prolonged exposure. Also, since these gloves are only partially covered in foam nitrile, they will not protect against liquids if the hands are entirely submerged. No gloves can fully protect against cuts, tears, punctures, and other injuries caused by mechanical hazards.

Regular basic care can extend the service life of your gloves. Simply wash the gloves in cold water (85 °F, 30 °C) with a mild detergent. Rinse with cold water. Air dry flat, or dry on low heat in a dryer. Do not use bleach (sodium hypochlorite) on these gloves.

Type of productFire protection equipment
Main categoryPersonal protection
Sub categoryGloves
Sub sub categoryCut-resistant gloves
Name of the productAnti-cutting glove
Series of productsTouch®
Product codeGS13FGFNT
Approved/CertifiedANSI A5 cut, ANSI 4 abrasion, ANSI 4 puncture
ManufacturerSuperior gloves
Fineness of the knitting13 Gauge
Choice of formatSize double extra small (5) to triple extra large (12) available
Characteristic adding safetyProvides 360° cut resistance
Material1Steel wire
Material2Dyneema™ knit
Material3Nitrile foam
Length (in/cm)8 in / 20.32 cm
Width (in/cm)6 in / 15.24 cm
Height (in/cm)0.25 in / 0.6 cm
Weight (lb/kg)0.15 lb / 0.068 Kg
Sold byPair
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Gabarit glove sizes Fr

Fichier en Français gabarit grandeur de gant

Download (117.67k)

27 other products in the same category: