Retrofit kit with 2 LED lightbulbs 1.5 W for emergency "Exit" signs

LED retrofit kit for emergency Exit signs

The retrofit kit (LALED) contains two 1.5 W LED bulbs and several types of bases (sockets) to fit a range of illuminated emergency "Exit" panels and signs. Its purpose is simple: to convert an old incandescent or fluorescent sign to far more energy-efficient LED lighting, without having to replace the whole sign. If you own old "Exit" panels whose original bulbs are costly or hard to find, this kit is the ideal upgrade solution.

LED technology brings very low power draw, minimal heat output and a service life far longer than traditional bulbs. On a permanently lit sign, the energy savings are significant and replacements become rare. The interchangeable bases provided make the kit compatible with a wide variety of existing signs, making it a versatile and cost-effective upgrade.

Benefits of the LED retrofit kit

Beyond a simple bulb swap, this kit turns an old sign into modern, energy-efficient equipment.

Energy savings and LED longevity

At just 1.5 W per bulb, the LEDs use a fraction of an incandescent bulb's energy and last far longer, cutting the bill and the frequency of replacements on permanent signage.

Interchangeable bases for many models

The various bases provided let the kit fit several existing Exit sign sockets, making it a versatile modernization solution.

Worksites and sectors where this kit is required

LED modernization of Exit signs is relevant everywhere older signs remain in service:

• Commercial buildings, offices and apartment buildings with older Exit signs.
• Institutional facilities (schools, hospitals, long-term care homes) seeking to cut their signage consumption.
• Stores, restaurants and hotels wanting to modernize their clearly marked exits.
• Industrial buildings and warehouses subject to emergency lighting system inspection.
• Any manager wanting to reduce the consumption and maintenance of their signs.

Installation and maintenance of the retrofit kit

Conversion involves removing the old bulbs from the sign, selecting the appropriate base from those provided and fitting the 1.5 W LED bulbs into the sockets, with the sign de-energized. After fitting, an emergency-mode test confirms the panel lights up correctly on both mains power and battery. Once converted, the LEDs need virtually no maintenance for many years.

FAQ about the LALED LED retrofit kit

Which signs can be modernized?

Thanks to its interchangeable bases, the LALED kit fits a wide variety of older Exit signs. Check your sign's socket type if needed.

How many bulbs does the kit contain?

The kit contains two 1.5 W LED bulbs, enough to relight a one- or two-bulb Exit sign.

Why switch to LED?

LEDs use far less power, last much longer and run cool, reducing the electricity bill and replacements of a continuously lit sign.

Suggested complementary emergency lighting equipment

Modernizing a sign often goes with the full maintenance of the signage; to complete your installation, also see a fluorescent 7 W bulb (LA7F), the small-base 130 V bulb (LA130P), the medium-base 130 V bulb (LA130M), an Exit sign with battery (LUMB), a replacement battery (LBLUM), a Baghelli LED bar (LCBD142), a 6 V 36 W unit (LU362MT) or a single 9 W spotlight (LUMT1). Under "Accessories" at the bottom of the page.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.