Optimize your respiratory protection with the rechargeable nickel-cadmium intrinsically safe battery from 3M. Designed for high-risk environments such as asbestos removal sites, this 4.8 volts DC battery offers 8 hours of autonomy and perfect compatibility with Powerflow systems. Ideal for demanding professionals, it guarantees reliability, safety and efficiency.
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
3M rechargeable intrinsically safe Nickel Cadmium (NiCd) battery pack, which supplies 4.8 volts DC. RBP/17IS provides up to 8 hours of run time. Sold individually.
3M manufacturer’s code: BP-17IS
Voltage 4.8 Volts DC
The rechargeable nickel-cadmium battery 3M BP-17IS is specially designed for powered air-purifying respirators, notably the Powerflow system. Thanks to its intrinsic safety, it significantly reduces the risk of ignition in the presence of combustible dust. Its 4.8 volts DC and 8-hour autonomy make it an ideal choice for long interventions in contaminated environments. This battery is NIOSH-approved when used with HEPA filters, ensuring optimal respiratory protection.
Performance, safety and autonomy for your powered air-purifying respirators.
The 3M BP-17IS battery stands out for its robust design and its ability to withstand 500 charge cycles. It is exclusively compatible with Powerflow powered respirators and must be used with HEPA filters to ensure performance that meets standards. Its low voltage allows safe use in hazardous environments while maintaining sufficient airflow for comfortable breathing. It is not suitable for activated carbon cartridges due to its limited voltage.
To install the nickel-cadmium 3M battery on your Powerflow powered respirator, simply connect it to the blower motor provided for this purpose. Make sure the compatible HEPA filters are properly secured before turning on the device. The battery must be inserted into its dedicated compartment, respecting the indicated polarities. Once installed, it powers the system for up to 8 hours, depending on usage conditions.
Maintaining the rechargeable 3M BP-17IS battery is simple but essential to extend its lifespan. It is recommended to wipe it with a damp cloth after each use, never immersing it in water. For recharging, use only the 3M R521/01/43R01 charging station, designed to preserve the battery’s performance and safety. Regular maintenance helps maintain optimal capacity and avoids the memory effect specific to Ni-Cd batteries.
Use the nickel-cadmium 3M battery in controlled environments, following safety instructions related to powered respirators. Always check that HEPA filters are in place before use. Do not attempt to modify or combine the battery with non-compatible systems. Fully recharge it before each intervention to ensure maximum autonomy. Avoid extreme temperatures and store the battery in a dry, ventilated place.
The battery can withstand up to 500 charge cycles, giving it a long lifespan for regular professional use.
No, the 3M BP-17IS battery is not compatible with activated carbon cartridges, as its voltage does not allow sufficient airflow for this type of filtration.
Use only the 3M R521/01/43R01 charging station. Never immerse the battery and avoid heat or moisture sources during charging.
Need additional safety equipment? See the articles; Safety hard hat (TA14LR), Okanagan minor hard hat type 1 (TA14FS), motorized respirator with 1000 protection factors (R6800PF), 3M mask protection film (R6885).
Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51), containment fabric (SACTT2) or (SAH2MA) air cleaners.
Data sheet
You might also like