Koala Behr universal size harness, grommeted leg straps, class A
FPH33102A
$62.25
Dentec Koala Behr class A safety harness in blue polyester, economical model. Pass-Thru chest buckles and grommeted (tongue) leg straps for easy donning, 3 adjustment points, steel dorsal D-ring and sub-pelvic strap. Universal size (medium to extra-large). Supports up to 310 lb (140.6 kg).
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Koala Behr class A harness with grommeted leg straps, universal size
The Dentec Koala Behr safety harness is an economical class A fall-arrest harness built for occasional construction and maintenance work. Fitted with a steel dorsal D-ring for fall arrest, it provides 3 adjustment points (2 on the legs and 1 on the chest) along with a sub-pelvic support strap for a safe, comfortable fit. Available in a universal size, it suits workers from medium to extra-large. Its economical nature is reflected in its unpainted metal components.
What sets this model apart are its buckles: the chest straps are joined by Pass-Thru buckles, while the leg straps use tongue (grommet) buckles at regular intervals. This grommet system makes the harness especially quick and easy to don. It is essential, however, to adjust and tighten the harness properly on the body: a loose harness can lead to the worker slipping out during a fall.
Its webbing is made of blue polyester, a material that offers better resistance to acidic chemicals than nylon. Plastic tips at the end of each strap prevent fraying while making adjustment easy, even with work gloves on. Two rigid retaining loops hold the lanyard when not in use and limit tripping hazards, and a drop indicator makes visual inspection before each use easier. Dentec product code: 16H33102FI (model H33102FI).
Benefits of the Koala Behr fall-arrest harness
This basic harness focuses on simplicity and quick donning thanks to its grommeted leg straps, while offering the comfort of a sub-pelvic strap. It is an economical choice to equip a crew or for occasional work at height.
Quick donning and precise adjustment
The tongue (grommet) buckles spaced at regular intervals on the legs allow simple adjustment and quick donning, even with gloves. When properly tightened, the harness stays safe and comfortable all day.
Worksites and sectors where this product is required
This class A harness meets fall-arrest needs across many environments involving work at height:
- Construction and renovation (framing, roofing, formwork, scaffolding)
- Building maintenance and occasional work at height
- Industry and plants (walkways, mezzanines, platforms)
- Telecommunications and work on structures or towers
- Municipal, roadwork and public services
A complete fall-arrest system around the harness
A harness never protects on its own: it is the core of a complete fall-arrest system that must also include a reliable anchor point and a connecting means suited to the work at height. Depending on your site, you will pair the Koala Behr harness with an energy-absorbing lanyard or connecting device, a compliant anchorage connector and the rescue equipment needed to act quickly after a fall.
Safety harness maintenance and inspection
The worker is responsible for a routine inspection before each use, looking for any sign of degradation, wear, malfunction or breakage. The harness must be replaced at the first sign of failure.
In addition, this harness should be inspected by a qualified person other than the worker who wears it. The required frequency varies by manufacturer: every 90 days, every 180 days or yearly. The harder the work and environmental conditions, the more often it should be inspected. The recommended service life of a harness is 5 years. Sylprotec offers a harness inspection service, available under the Service tab at the top of the page. Any equipment subjected to a fall or impact must be taken out of service.
For cleaning, use a gentle soap and clean lukewarm water (37 °C). Do not use bleach or other abrasive or chemical products. Air dry without excessive heat, in a clean environment, and avoid exposing the harness to sunlight or any source of contamination.
Frequently asked questions about the Koala Behr harness
What are grommeted (tongue) leg buckles?
They are tongue buckles with grommets spaced at regular intervals along the leg straps; you insert the tongue into the grommet matching the right size. They make donning simple and quick, but the harness must always be snug on the body.
How many adjustment points does this harness have?
It has 3 adjustment points: 2 on the legs and 1 on the chest, plus a sub-pelvic support strap.
How much weight can this harness support?
It supports a worker up to 310 lb (140.6 kg), including clothing, tools and equipment.
Fall-arrest equipment suggestions for the harness
See also a lanyard with energy absorber (FPL5400), a temporary concrete anchor (FPAF075N), a galvanized steel sling (FPAE), a rescue device (FPLR550), a storage bag (FPBAG), a wrist tools strap (FPLA9900), the mandatory inspection sign (ECO130) and safety eyewear (YA12E93101DX). Under "Accessories" at the bottom of the page.
FPH33102A
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Safety harness
- Series of products
- Koala Behr
- Product code
- FPH33102A
- Product use
- Designed for construction work
- Approved/Certified
- Meets the standards ANSI Z359.11-2014 and CSA Z259.10-12
- Manufacturer
- Dentec Safety Specialists
- Country of origin
- United State of America
- Choice of format
- Universal sizes (medium to extra-large)
- Reusable
- Reusable with careful inspection and proper installation
- Features
- The chest straps are connected by Pass-Thru buckles and the thigh straps are connected by grommeted leg straps (eyelets)
- Additional Features
- This harness has 3 adjustment points; 2 on the legs and 1 on the chest
- Comfort features
- Equipped with a sub-pelvic strap providing greater comfort during suspension
- Characteristics of metal parts
- Non-painted metal parts
- Post-suspension relief strap
- Does not include trauma straps
- Includes
- With a steel back ring
- Type of retaining straps
- Auto-resetting lanyard keepers
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Classification
- Class A — dorsal D-ring (A) for fall arrest
- Function of attachment points
- Dorsal D-ring: fall arrest
- Material1
- Polyester
- Material2
- Steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your lanyard. Air dry
- Length (in/cm)
- 11 in / 27.94 cm
- Width (in/cm)
- 11 in / 27.94 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 2.2 lb / 1 kg
- Sold by
- Unit
- Color
- Blue
- Another packaging available
- By the box of 12 units
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- The maximum weight of the worker wearing this harness is 310 lb / 140.6 kg, including clothing, tools, etc
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Dentec Koala Behr class A safety harness in blue polyester, economical model. Pass-Thru chest buckles and grommeted (tongue) leg straps for easy donning, 3 adjustment points, steel dorsal D-ring and sub-pelvic strap. Universal size (medium to extra-large). Supports up to 310 lb (140.6 kg).