3M calibration kit for compressed air regulation and filtration panel

Calibration kit for 3M^Tm compressed air filter and control panel

Do you have a 3M™ portable compressed air filtration panel equipped with the carbon monoxide (CO) monitor? The 3M™ 529-04-49 calibration kit is the accessory you need!

Manufacturer's code: 7000131704 or model 529-04-49.

In the industrial world, safety is paramount. Make sure your carbon monoxide detectors operate with unsurpassed accuracy with the 3M™ Calibration Kit. It works with model R256/02/01 or model R256/02/00.

Designed for 3M™ respiratory protection systems, this kit is the essential tool for maintaining the compliance and performance of your equipment.

The 529-04-49 3M™ Calibration Kit is a piece of equipment used to calibrate the carbon monoxide (CO) detectors in certain 3M™ respiratory protection systems. Here are some key details about this calibration kit:

• Use: It is specifically designed for 3M™ portable compressed air filter and control panels, model R256/02/01 or model R256/02/00.
• Components: The kit contains a 0.6 cu. ft. zero gas cylinder, a 0.6 cu. ft. span gas cylinder, a valve and a case.
• Ease of use: It's easy to use and set up, ensuring that measurement tools are properly calibrated.

This calibration kit is designed to allow the carbon monoxide monitor to be set for zero and known gas readings, to ensure accurate readings of CO concentration in air passing through portable air purification panels.

Calibration of carbon monoxide detectors is essential to ensure their accuracy and reliability. By using the 529-04-49 Calibration Kit, you can ensure that your tools are properly calibrated, which is crucial for safety.

Take no chances with the safety of your personnel. Choose the 3M™ Calibration Kit for guaranteed peace of mind.

Good to know about the calibration kit:

If carbon monoxide detectors are not properly calibrated, it can lead to safety risks. Here are some possible consequences:

1. False positives: A poorly calibrated detector may report the presence of CO, even if the actual level is low, leading to unnecessary evacuations or disturbances.
2. False negatives: Conversely, a poorly calibrated detector may fail to detect dangerous levels of CO, thus endangering the health of occupants.
3. Malfunction: Incorrect calibration can lead to detector malfunctions, which can compromise safety.

In summary, regular calibration is essential to ensure that carbon monoxide detectors operate correctly and effectively protect against the risk of CO poisoning.

Special features for the calibration kit :

Perfect for a 3M™ portable compressed air filter and control panels, it contains everything you need for easy, reliable calibration.

Application for the calibration kit;

Using the 3M™ Calibration Kit, black, is a multistep process that ensures your carbon monoxide detectors work properly. Here's a simplified guide to using it:

• Preparation:
  • Make sure the CO detector is switched off.
  • Connect the calibration kit to the detector according to the manufacturer's instructions.
• Zero calibration:
  • Use the “zero gas” bottle to purge ambient air from the detector.
  • Follow the instructions to set the detector to a zero baseline.
• Span calibration:
  • Connect the “Span gas” bottle containing a known concentration of CO.
  • Adjust the detector to read the exact concentration of the calibration gas.
• Verification:
  • Once calibration is complete, check the readings for accuracy.
  • Repeat the process if necessary to obtain accurate readings.
• Documentation:
  • Document the calibration process, including gas values and readings obtained.

Note: Always perform calibration in a safe, well-ventilated environment to avoid exposure to CO.

Very useful in applications such as assembly, sandblasting, cleaning, metal repair and painting.

It is important to follow the specific instructions supplied with your calibration kit and CO detector to ensure correct calibration.

Maintenance and service life for the calibration kit :

Inspect the kit regularly for signs of wear or damage, and replace parts as recommended by the manufacturer.  Keep the kit in a clean, dry place to avoid contamination or damage to components.

Suggestions for using your calibration kit:

Need additional safety equipment? See the items; Cut resistant gloves (GS21TXUFN), 3M Securefit 400 series eyewear (YASF401), construction helmet (TA14LR), PEPF cut-resistant gloves (GZ13PEHPFN), high-visibility waterproof set (VP5618), nylon and orange latex knit gloves (G051144).

Under “Accessories” at the bottom of the page. If you're looking for work equipment, take a look at the following products: Earplugs (OA101) and nitrile disposable gloves (GL7005).

The texts colored in green correspond to hyperlinks leading to specific safety equipment or to a general information link.