- New
Evaporative cooling hard hat pad and liner, give fresh feeling.
VH6715
$4.10
Evaporative cooling pad for a safety helmet, made of super-absorbent acrylic polymer crystals. Soak in ice water and it provides a cooling sensation for up to 4 hours.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Evaporative cooling PVA pad for safety helmet — up to 4 hours of freshness
Cooling pad that attaches to the center of the safety helmet and provides a cooling sensation for about 4 hours. It is made of super-absorbent acrylic polymer crystals.
To get about 4 hours of freshness, soak the pad for 2 to 5 minutes in an ice-water solution. The cold water transfers inside the crystals and evaporates slowly; repeat as needed.
Cooling pad features
- Type: cooling pad for safety helmet
- Material: super-absorbent acrylic polymer crystals
- Installation: attaches to the center of the helmet
- Activation: soak 2 to 5 minutes in ice water
- Duration: cooling sensation for about 4 hours, reusable
How the cooling hard hat pad works
The acrylic polymer crystals are super absorbent: they store cold water, which then evaporates slowly to cool the head under the helmet. This evaporative cooling helps reduce heat discomfort and prevent heat stroke when working in hot environments, while keeping the safety helmet in place.
Activation and maintenance of the PVA pad
Soak the pad for 2 to 5 minutes in an ice-water solution before use. When the cooling sensation fades, dip it back into cold water to reactivate it. Let it dry completely between extended uses to preserve the material.
FAQ — Cooling hard hat pad VH6715
How do I activate the cooling pad?
Soak it for 2 to 5 minutes in an ice-water solution. The polymer crystals absorb the cold water, which then evaporates slowly to provide about 4 hours of freshness.
Is it reusable?
Yes. When the cooling fades, simply dip it back into cold water to reactivate it, as many times as needed.
Does it fit any helmet?
It attaches to the center of the safety helmet suspension to cool the top of the head while worn.
Complementary suggestions to fight the heat
To stay cool, see the PVA cooling bandana (VH6700CT), the PVA cooling cap (VH6710CT) and the cooling towel (VH6602).
Under "Accessories" at the bottom of the page, complete your equipment with the grey nylon cooling vest (VH6665G) and the phase-change model (VH6215).
VH6715
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Safety clothing
- Sub sub category
- Heat-resistant gear and cooling wear accessories
- Name of the product
- Cooling pad for safety helmet.
- Series of products
- Chill-Its®
- Product code
- VH6715
- Manufacturer
- Ergodyne
- Country of origin
- China
- Choice of format
- Unique size
- Features
- Allows you to cool down in hot and/or humid weather, both indoors and outdoors
- Additional Features
- Attached to the center of the helmet
- Comfort features
- Provides a feeling of freshness for 4 hours
- Material1
- Made of acrylic polymer crystals
- Material2
- Cotton
- Not washable
- It is best to replace this item when it is too contaminated, worn or soiled. Do not attempt to wash it
- Length (in/cm)
- 9.5 in / 24.1 cm
- Width (in/cm)
- 7 in / 17.8 cm
- Height (in/cm)
- 0.5 in / 1.27 cm
- Weight (lb/kg)
- 0.04 lb / 0.018 Kg
- Sold by
- Unit
- Color
- Blue
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Evaporative cooling pad for a safety helmet, made of super-absorbent acrylic polymer crystals. Soak in ice water and it provides a cooling sensation for up to 4 hours.