- New
3M DBI-SALA Aluminum Rebar Hook Y Lanyard 6 ft 1246596C
FPL1246596C
$543.15
3M DBI-SALA 1246596C 6 ft Y-shaped twin-leg tie-back lanyard with polyester webbing, energy absorber, two aluminum rebar hooks on the anchorage side, snap hook harness connection and CSA Z259.11 compliance.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
3M DBI-SALA 1246596C Aluminum Rebar Hook Y Lanyard, 6 ft
3M manufacturer code: 7100329214, model 1246596C
This 3M DBI-SALA Y-shaped twin-leg tie-back lanyard helps maintain continuous connection while moving between compatible anchorage points. Model 1246596C measures 6 ft and combines polyester webbing with an internal energy absorber. Its two aluminum rebar hook anchorage connections, snap hook harness connection, 3M RFID system and protected labels support integration into a fall protection program.
Applications for the 3M DBI-SALA 1246596C Rebar Hook Y Lanyard
This lanyard is listed for machine operation, reconditioning and facility maintenance. It is also relevant in construction, general industry, metal fabrication, transportation, utilities, mining, oil and gas, and wind energy. Final selection must consider fall clearance, the harness, the anchorage and jobsite procedures.
Verified Details of the 6 ft Twin-Leg Web Lanyard
- Y-shaped twin-leg tie-back lanyard with internal energy absorber
- 100 percent tie-off with twin-leg configuration
- Working length: 6 ft / 1.82 m
- Capacity: 132 to 310 lb / 59.9 to 140.6 kg
- Load capacity: 310 lb / 140 kg
- Lifeline material: webbing
- Lanyard material: polyester webbing
- Number of legs: 2
- Number of sections: double, 100 percent tie-off
- Anchorage connection: rebar hooks
- Harness connection: snap hook
- Hook material: aluminum and anodized aluminum
- Colour: yellow
- Compliant with CSA Z259.11
- 3M RFID system and protected labels
Precautions for a Twin-Leg Fall Arrest Lanyard
Inspect the lanyard, webbing, energy absorber, connectors, labels and identification system before each use. Confirm that all components used together are compatible and that the anchorage point is suited to the work being performed. Any lanyard showing abnormal wear or that has arrested a fall must be removed from service according to applicable requirements.
FAQ: 3M DBI-SALA 1246596C Rebar Hook Y Lanyard
What is the working length of this lanyard?
Model 1246596C has a working length of 6 ft, or 1.82 m.
What worker capacity is listed for this model?
The listed range is 132 to 310 lb, or 59.9 to 140.6 kg, including clothing, tools and equipment.
How many legs does this lanyard have?
The model has two legs and a Y-shaped double configuration for 100 percent tie-off.
Which connectors are listed?
The model uses two rebar hooks on the anchorage side and a snap hook on the harness side.
Is this lanyard compliant with a CSA standard?
Yes. Model 1246596C is listed as compliant with CSA Z259.11.
Complementary suggestions for this rebar hook Y lanyard:
A cladding installer at height connecting with this DBI-SALA 3M lanyard completes personal protection with a high-visibility garment (VP5627), a helmet (TA14OR) held by its chinstrap (TA14CS), cut-resistant gloves (GS21TXUGFN), safety eyewear (YA12E93103) and corded earplugs (OA101D) that stay around the neck and cannot drop from height.
For the lanyard to work in a complete fall arrest system, plan a DBI-SALA 3M harness (FPH140213XALP), a DBI-SALA 3M fixed anchor (FPA8523178), a DBI-SALA 3M cable anchorage sling (FPA1003000C), a 50 ft RollGliss R550 rescue (FPLR5503325) and descent device for emergency lowering, a DANGER barricade tape (ECT3YE7) to cordon off the ground area and the sign (ECO130) reminding that the harness is mandatory.
FPL1246596C
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Lanyards
- Name of the product
- Y-shaped twin-leg tie-back lanyard with energy absorber
- Product code
- FPL1246596C
- Product use
- Machine operation, reconditioning and facility maintenance
- Approved/Certified
- CSA Z259.11
- Manufacturer
- 3M DBI-SALA
- Country of origin
- United State of America
- Format
- 6 ft / 1.8 m
- Types of lanyards
- Y-shaped double lanyard
- Features
- 6 ft Y-shaped twin-leg tie-back lanyard with polyester webbing
- Characteristics of the strap or cable
- Polyester webbing
- Characteristics of metal parts
- 100 percent tie-off with twin-leg configuration
- Carabiners characteristics
- Two aluminum rebar hook anchorage connections and one snap hook harness connection
- Feature that facilitates use
- 3M RFID system for inspection tracking with a compatible reader
- Includes
- With energy absorber
- Worker’s weight
- 130 to 310 lbs / 59 to 140 kg (including tools and equipment)
- Material1
- Polyester webbing
- Material2
- Aluminum
- Length (in/cm)
- 17 in / 43.18 cm
- Width (in/cm)
- 13 in / 33.02 cm
- Height (in/cm)
- 8 in / 20.32 cm
- Weight (lb/kg)
- 5.92 lb / 2.69 kg
- Sold by
- Unit
- Color
- Yellow
- Caution
- Maximum supported worker weight from 132 lb to 310 lb / 59.9 kg to 140.6 kg, including clothing, tools and equipment
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
3M DBI-SALA 1246596C 6 ft Y-shaped twin-leg tie-back lanyard with polyester webbing, energy absorber, two aluminum rebar hooks on the anchorage side, snap hook harness connection and CSA Z259.11 compliance.