- New
3M DBI-SALA Force2 EZ-Stop Y Lanyard 6 ft 1246145
FPL1246145
$625.85
3M DBI-SALA 1246145 6 ft Force2 EZ-Stop Y-shaped double safety lanyard with stretch polyester webbing, Vectran energy absorption, two legs, 100 percent tie-off, rebar hook anchorage connection and double-action snap hook harness connection.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
3M DBI-SALA 1246145 Force2 EZ-Stop Y Lanyard, 6 ft
3M manufacturer code: 7100321256, model 1246145
This 3M DBI-SALA Force2 EZ-Stop Y-shaped safety lanyard helps maintain continuous connection while moving between compatible anchorage points. Model 1246145 measures 6 ft and combines stretch polyester webbing with an exclusive Vectran energy absorption system. Its two legs, built-in impact indicator, abrasion-resistant webbing and 100 percent tie-off configuration suit demanding work-at-height tasks.
Applications for the 3M DBI-SALA 1246145 Force2 Lanyard
This lanyard is designed for construction work and situations where the worker must move from one compatible anchorage point to another. It can also be used when foot-level tie-off is needed because overhead anchorage is not available. Final selection must consider fall clearance, the harness, the anchorage and jobsite procedures.
Controlled Details of the 6 ft Force2 Y Lanyard
- Force2 EZ-Stop Y-shaped double lanyard with energy absorber
- Total and working length: 6 ft / 1.83 m
- Load capacity: 420 lb / 190 kg
- Lanyard material: polyester webbing
- Energy absorption system: Vectran
- Number of legs: 2
- Number of sections: double, 100 percent tie-off
- Anchorage connection: rebar hook
- Harness connection: snap hook with double-action gate
- Lanyard type: variable / elastic
- Built-in impact indicator
- Country of origin: USA
- Dimensions: 14.75 x 7 x 15.75 in
- Gross weight: 4.475 lb
Precautions for a Twin-Leg Force2 Lanyard
Inspect the lanyard, webbing, energy absorber, connectors, impact indicator and labels before each use. Confirm that all components used together are compatible and that the anchorage point is suited to the work being performed. Any lanyard showing abnormal wear or that has arrested a fall must be removed from service according to applicable requirements.
FAQ: 3M DBI-SALA 1246145 Force2 Lanyard
What is the length of this lanyard?
Model 1246145 has a total and working length of 6 ft, or 1.83 m.
What load capacity is listed?
The listed load capacity is 420 lb, or 190 kg.
How many legs does this lanyard have?
The model has two legs and a double configuration for 100 percent tie-off.
What energy absorption system is listed?
The model uses the Force2 EZ-Stop energy absorption system with Vectran.
Which connectors are listed?
The model uses a rebar hook on the anchorage side and a snap hook with double-action gate on the harness side.
Complementary suggestions for this Force2 lanyard:
A commercial roofing installer connecting with this DBI-SALA 3M lanyard completes personal protection with a high-visibility garment (V6692B), a helmet (TA14OR) held by its chinstrap (TA14CS), cut-resistant gloves (GSCXTAPVC), safety eyewear (YA11514) and corded earplugs (OA1101) that stay around the neck and cannot drop from height.
For the lanyard to work in a complete fall arrest system, plan a DBI-SALA 3M harness (FPH111306XCAE), a DBI-SALA 3M fixed anchor (FPA2103690), a second DBI-SALA 3M complementary anchor (FPA8517412), a 50 ft RollGliss R550 rescue (FPLR5503325) and descent device for emergency lowering, a DANGER barricade tape (ECT3YE7) to cordon off the ground area and the sign (ECO130) reminding that the harness is mandatory.
FPL1246145
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Lanyards
- Name of the product
- Force2 EZ-Stop Y-shaped double lanyard with energy absorber
- Product code
- FPL1246145
- Product use
- Construction and work at height with transitions between anchorage points
- Manufacturer
- 3M DBI-SALA
- Country of origin
- United State of America
- Format
- 6 ft / 1.8 m
- Types of lanyards
- Y-shaped double lanyard
- Features
- Abrasion-resistant stretch webbing with Vectran energy absorption
- Additional Features
- Foot-level tie-off when overhead anchorage is not possible
- Characteristic adding safety
- Built-in impact indicator
- Characteristics of the strap or cable
- Abrasion-resistant stretch polyester webbing
- Characteristics of metal parts
- Rebar hook and double-action snap hook
- Carabiners characteristics
- Rebar hook on anchorage side and double-action snap hook on harness side
- Feature that facilitates use
- Stretchable legs that follow worker movements
- Includes
- With a Force2 EZ-Stop energy absorber
- Worker’s weight
- 420 lb / 190.5 kg maximum, with tools and equipment
- Material1
- Polyester webbing
- Material3
- Vectran
- Length (in/cm)
- 14.75 in / 37.465 cm
- Width (in/cm)
- 15.75 in / 40.005 cm
- Height (in/cm)
- 7 in / 17.78 cm
- Weight (lb/kg)
- 4.475 lb / 2.03 kg
- Sold by
- Unit
- Caution
- 420 lb / 190 kg
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
3M DBI-SALA 1246145 6 ft Force2 EZ-Stop Y-shaped double safety lanyard with stretch polyester webbing, Vectran energy absorption, two legs, 100 percent tie-off, rebar hook anchorage connection and double-action snap hook harness connection.