Non-flammable and non-toxic gases placards class 2.2

Non-flammable and non-toxic gases placards class 2.2, 10-3/4 in X 10-3/4 in

This item is not kept in stock. Please allow 5 days for delivery.

This TDG placard identifies a load of class 2.2 non-flammable and non-toxic gases. It shows the gas cylinder symbol and the class number 2 on a green 10-3/4 X 10-3/4 in diamond that fits most placard holders. This version without a UN box displays the class; to show on the placard the UN number of the material given on the shipping document, choose the version with a blank UN number panel (ECLA2.2UN). Made in Canada, it is sold individually.

Features of the class 2.2 non-flammable gases placard

• Gas cylinder symbol and class number 2, non-flammable and non-toxic gases.
• Without a UN box: the placard displays the class.
• 10-3/4 X 10-3/4 in diamond, the standard placard holder size.
• Three materials: low-cost cardboard, reusable rigid plastic or permanent self-adhesive vinyl.
• Compliant, according to the manufacturer, with Transport Canada's TDG Regulations, US DOT and the IMDG, IATA and ICAO codes.

Available formats: cardboard, rigid plastic, self-adhesive vinyl or aluminum

Class 2.2 non-flammable gases placard applications

This placard is intended for carriers and shippers of class 2.2 non-flammable and non-toxic gases, in Canada and internationally: transport by vehicle or tank, cross-border, marine and air shipments. This placard without a UN box displays the class. When the UN number must appear on the placard, choose the version with a blank UN number panel (ECLA2.2UN), completed with the self-adhesive digits ECLACH-0 to ECLACH-9 (ECLACHIFFRES) or the 500-digit kit (ECLAUNNUM).

Complete your display with the 10-3/4 in aluminum placard holder (ECLAP), and the aluminum flip chart placards with five (ECLAP5) or fourteen (ECLAP14) legends, for vehicles whose cargo changes.

Class 2.2 non-flammable gases placard technical specifications

Placard installation and care

Apply the self-adhesive vinyl to a clean, dry surface. Keep the placard clean so it stays legible, and replace it if it is damaged, faded or illegible. For a placard exposed to the weather for a long time, choose rigid plastic or vinyl over cardboard.

FAQ: class 2.2 non-flammable gases placard

What is the difference between this placard and the version with a UN box?

This placard without a UN box displays the class. The version with a blank UN number panel (ECLA2.2UN), offered on a separate listing, lets you apply the UN number of the material shown on the shipping document.

Which material should I choose: cardboard, plastic or vinyl?

Cardboard for temporary use, rigid plastic for a placard reused in a placard holder, self-adhesive vinyl for permanent application on a tank or vehicle.

Is the placard available in aluminum?

Yes. The aluminum version (ECLA2.2-A) is offered on this listing, in addition to cardboard, rigid plastic and self-adhesive vinyl. Choose the material in the selector.

Does the placard fit in a placard holder?

Yes. Its 10-3/4 X 10-3/4 in format fits most placard holders.

Is this placard suitable for international shipments?

According to the manufacturer, it complies with the TDG Regulations, US DOT and the IMDG, IATA and ICAO codes. Always check the requirements that apply to your shipment.

Suggestions for transport of compressed gases

For the driver or handler who applies placards and handles gas cylinders and containers at loading, delivery or in the warehouse, plan for Nemesis clear lens safety glasses (YA3297), a Delta Plus Independence type 1 class E safety helmet (TA14LR), Clutch Gear water-repellent mechanic gloves (G408), Ranpro Airlok waterproof boots (VC405FUL) with steel plate and a fluorescent orange traffic vest (VV50) to stay visible on the road and at the loading station.

A gas leak cannot be recovered with an absorbent: to respond to an incident on the road or at the warehouse, keep people away and mark off the perimeter with 36 in traffic cones (EPTCONE36), red (ECT3RE9) or yellow (ECT3YE7) 3 in X 1000 ft DANGER barricade tape and a 10 ft expandable aluminum barrier (EPT999); to light the scene at night, use a UK4AA-eLED anti-explosion flashlight (LL01), intrinsically safe for Class 1, Div. 1. Under CNESST rules, a truck driver is an isolated worker: the type 1 personal (TR01) first aid kit suits an isolated worker with no access to another kit, a vehicle with 1 to 5 workers, or a vehicle with more than 5 workers less than 30 minutes from medical services; for a vehicle with more than 5 workers more than 30 minutes from medical services, provide the type 2 basic (TR02M) first aid kit. Complete the truck's equipment with a portable road safety kit (TR16) and the set of three removable reflectors (EPTR) to signal a stopped vehicle. The perimeter and the measures to take depend on the material: check the 2024 ERG guide shown for the UN number on the shipping document.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.