Superior Touch economic 13 gauge nylon knit gloves with polyurethane coating


Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Superior Touch® economy 13-gauge nylon knit gloves with black polyurethane palms and fingers. Sold by the pack. 12 pairs/pack.

Superior manufacturer’s code: S13BKPUQ

These gloves are available in sizes ranging from extra-small (6) to double extra-large (11). Please select the size needed in the field located above.

This glove has a puncture resistance level 2 according to ASTM and ANSI standards.

This glove meets EN388 standards as for protection against mechanical hazards. This level of protection is expressed by a pictogram followed by four numbers, in this case 4131, where the resistance to abrasion is 4/4, the cut resistance is 1/5, the tear resistance is 3/4 and the puncture resistance is 1/4.

GS13BKPUQ peculiarities:
This nylon knit glove is so finely woven that it has almost no effect on the sense of touch which comes handy for workers that need to keep their tactile sensitivity. Nylon moreover doesn’t lint and polyurethane doesn’t flake which means a low-particulate shedding on handled parts.

Nylon properties:
Nylon exhibits good mechanical, electrical and chemical properties. It is also highly wear-resistant, mostly to friction, it doesn’t strain the hand easily and it resist well to heat, but not to an open flame. Nylon has a little to no absorbent quality which is ideal if you want to keep your hands dry while working.

Polyurethane properties:
Polyurethane is a polymer composed of organic units joined by urethane which gives it good chemical and mechanical properties. This material has a great resilience, it is not known to distort itself, it is also abrasion-resistant, cut-resistant and tear-resistant. It resists to various chemicals, UV light and liquids since it absorbs nothing whatsoever. PU also offers an excellent grip and a good touch-sensitivity as well as a good dexterity.

Use for:
This glove is recommended for the car industry, maintenance, aerospace industry, electronics industry, the small parts handling, cleanroom assembly, etc.

Do not use for:
Polyurethane offers little to no resistance to heat and since the glove is partially covered, it is not recommended to submerge it in liquids.

Maintenance and service life:
It is recommended to carry out a basic maintenance to extend the service life of your gloves. Simply wash them with cold water, that is, 85°F/30°C and a mild detergent. You can then dry them at low temperature in a dryer. Never use bleach on this glove.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryGloves
Sub sub categoryReusable gloves nitrile, rubber, latex, neoprene or PVC
Name of the productCoated knitting glove
Series of productsSuperiortouch (Tm)
Product codeGS13BKPUQ
Approved/CertifiedANSI 2 puncture, ANSI 3 abrasion
ManufacturerSuperior gloves
CoatingPolyurethane coating on palmar surface and fingers
Fineness of the knitting13 Gauge
Choice of formatSize double extra small (5) to double extra large (11) available
ReusableReusable with prior hygienic measurement
Additional FeaturesLeaves no trace when touched
Material1Nylon knit
WashableWash in cold water at 85°F/30°C with mild detergent. It is recommended to rinse gloves in cold water before drying. Spread to dry. Never use bleach on this glove
Length (in/cm)6 in / 15.24 cm
Width (in/cm)4 in / 10.16 cm
Height (in/cm)0.25 in / 0.6 cm
Weight (lb/kg)0.25 lb / 0.113 Kg
Sold byPair
Another packaging available1By the dozen (12 pairs)
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page


30 other products in the same category: