- New
This item is not kept in stock. Please allow 5 days for delivery.
High-security bolt seals made of galvanized A3 steel with an ABS coating, to protect trailer doors, shipping containers and high-value cargo. Their heavy bolt forms a real physical barrier, and each seal carries a consecutive serial number for verification at dispatch, checkpoints and receiving. The manufacturer declares them compliant with ISO/PAS 17712:2013 and publishes a pull strength of 3,035 lb (1,377 kg). Available in yellow, blue or white, in cases of 250 seals of one colour.
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
This item is not kept in stock. Please allow 5 days for delivery.
These high-security bolt seals protect trailer doors, shipping containers and high-value cargo. Made of a galvanized A3 steel bolt with a tough ABS coating, these tamper-evident seals are designed for transportation and cargo security, where a higher level of physical security is required. The manufacturer declares them compliant with ISO/PAS 17712:2013 requirements for high-security seals. Their consecutive numbering supports shipment verification, cargo tracking and a documented chain of custody, from origin to delivery. They come in three colours, yellow, blue and white, all at the same price, to distinguish loads or routes. Each case holds 250 seals of a single colour.
3 variants available: choose the colour when ordering.
| Sylprotec code | Colour | Case contents |
|---|---|---|
| EPTSBOUL-JA | Yellow | 250 yellow seals (25 blisters of 10) |
| EPTSBOUL-BL | Blue | 250 blue seals (25 blisters of 10) |
| EPTSBOUL-BC | White | 250 white seals (25 blisters of 10) |
These seals suit international freight, containerized goods, trucking and other controlled shipments. They support documented chain-of-custody and shipment security procedures. For an irregular, widely spaced or hard-to-reach locking point, see the high-security cable seals (EPTSCAB175).
| Feature | Detail |
|---|---|
| Material | Galvanized A3 steel, ABS coating |
| Colour | Yellow, blue or white, depending on the variant |
| Bolt length | 3.125 in (7.94 cm) |
| Bolt diameter | 0.31 in (0.79 cm) |
| Body width | 0.875 in (2.22 cm) |
| Locking barrel | About 1.375 in high X 0.875 in wide (3.49 X 2.22 cm) |
| Pull strength | 3,035 lb (1,377 kg) |
| Declared standard | ISO/PAS 17712:2013, according to the manufacturer |
| Numbering | Consecutive serial numbers |
| Packaging | 25 blisters of 10 seals |
| Case weight | 32.63 lb (14.801 kg) |
| Country of origin | China |
| Sold by | Case of 250 seals of one colour |
Insert the bolt through the trailer or container door hasp, then push it into the barrel until it clicks and locks. Record the seal number and colour on the bill of lading or manifest. At each checkpoint and at receiving, check that the seal is intact and its number matches. The seal is removed with a bolt cutter, wearing gloves and eye protection; it cannot be reused.
The manufacturer declares them compliant with ISO/PAS 17712:2013 requirements for high-security seals. Check with your carrier or security program which requirements apply to your freight.
For a trailer or container door with a hasp: the rigid bolt forms a heavier physical barrier. A cable seal is better for irregular or hard-to-reach locking points.
3,035 lb (1,377 kg) pull strength, according to the manufacturer. This is a breaking strength, not a load capacity.
With a bolt cutter, wearing gloves and eye protection. The seal is single use.
Yellow, blue and white, all at the same price: select the colour from the list when ordering. The seals are packed in blisters of 10, 25 blisters per case, for 250 seals of a single colour.
Need complementary safety equipment for applying and checking security seals? Consider the glasses (YA11329) with clear Virtua Max lenses, the gloves (GZ13POFN) with Zenith nitrile coating for handling, the shirt (VV6990) in orange high-visibility fabric, the overalls (VP5629) with yellow waterproof construction, and the guards (VCMET) with Metguard metatarsal coverage for steel-toe footwear.
Under “Accessories” at the bottom of the page. Looking for complementary equipment? Consider the tape (ECT3YF1) in yellow ATTENTION for marking, the reflectors (EPTR) for marking a stopped vehicle, and the kit (TR16) for supplementing vehicle emergency supplies.
Data sheet
You might also like