RVTR300HKL

3M complete Versaflo powered air purifying respirator (PAPR) kit for pharmaceutical and health facilities. Head cover facepiece.

$1,976.20

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

3M complete Versaflo kit for respiratory protection by powered air purifying respirator (PAPR). This piece of equipment gets its NIOSH homologation when assembled with the other components recognized by the manufacturer as part of a complete system. It is recommended for workers in need of respiratory protection in health, food and pharmaceutical sectors. Compatible with 3M RVTR3712N filters. One kit per case.

3M Versaflo is a new generation powered air purifying respirator which offers a perfect balance between protection and comfort. It combines components which protect not only one’s respiratory tract but also one’s eyes and face. The kit includes among others, a high nominal capacity battery which provides 8 to 12 hours of run time and many accessories.

Included in the kit : 
- 1 Powered air purifying respirator unit (RVTR302N)
- 1 Filter cover (RVTR371)
- 1 Airflow indicator (RVTR970)
- 1 Easy-clean polyurethane belt (RVTR327)
- 1 High capacity lithium ion battery; Run time of 8 to 12h (RVTR332)
- 1 Single station battery charger kit (RVTR341)
- 1 High efficiency (HE) filter (RVTR3712N)
- 1 Prefilter (RVTR3600)
- 1 Medium/Large respiratory headcover (RS133L)
- 1 Peel-off visor cover (RM928)
- 1 Heavy duty neoprene breathing tube; Length: 525 to 850 mm (RBT30)
- 1 Storage bag

3M manufacturer’s code: TR-300N+HKL

3M Versaflo powered air purifying respirator unit features RVTR302N
PAPRs, powered air purifying respirator are systems made to blow filtered air into the respiratory equipment, which provides air automatically rather than mechanically such as regular respirators. 3M Versaflo differs from other PAPRs by its lightness, its ergonomic and its versatility which allows everyone, even bearded men to be protected when well installed. This type of equipment offers a protection up to 25 times the permissible exposure limit set by the CNESST or any other government regulation applicable. PAPRs minimize the effort put into breathing and can reduce build up heat inside the facepiece. It features a smart engine which adapts accordingly to the HEPA filter in use. It is also equipped with an alarm system - one audible and one LED – which alert the user to either a low battery or low airflow. This PAPR contains no natural rubber latex.

Facepiece features:
Two sizes of facepiece are available; the RS133L corresponds to the medium/large size; for the small/medium size, see below in the menu. Its loose-fitting design moulds itself in the shape of one’s face and head. It features a head harness for a better comfort. The facepiece consist of a woven and non-woven polypropylene layered membrane and a visor of laird plastic (PETG), a soft material providing a relatively good impact resistance. This type of facepiece has been mainly design for workers in health, food and pharmaceutical sectors.

Use for
This type of respiratory protection system is recommended for work that will loosen solid particles in the air such as work in health facilities, food factories and pharmaceutical laboratories. The HEPA filters which comes with the kit protect one from most airborne particles with an 99,97% efficiency. The facepiece is disposable which is safer for users being exposed to substances that may stay on the textile surface, thus contaminating users if they had to wash the facepiece.

Biological particles:
These filters help prevent the inhalation of certain airborne biological particles like mold, Bacillus anthracis (Anthrax), Mycobacterium tuberculosis (Tubercle bacillus Koch) the main causative agent of tuberculosis, pandemic flues (H5N1, H1N1), etc. However, it cannot eliminate the risk of contracting infection, illness or disease. Due to the nature of some contaminants, the exposure limit value of some products and byproducts haven’t been quantified by governmental agencies, thus wearing a respirator doesn’t necessarily protects you.

Do not use for:
This respirator does not offer a protection against vapors and gases. It can neither ensure the user intrinsic safety in an environment representing an explosion risk. It is strongly discouraged to wear any kind of respirator for application with sandblasting. It is also highly advised to stay away from environment that exceed 25 times the permissible exposure limit set by the CNESST or any other government regulation applicable. One should never use a respirator in an oxygen deprived environment (an atmosphere with less than 19,5 % oxygen).

Maintenance and service life:
For a safer performance, manufacturer’s recommendation must be followed. 3M recommends an inspection of the respiratory equipment before each use; to wash the respirator after each use; and to store the respirator back to its packaging.

One should never wash its respirator with any type of solvents since they can weaken some components which can affect the efficiency of the equipment. The engine, the battery and the HEPA filter must never be immersed in water.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryRespiratory protection
Sub sub categoryTR-300 Versaflo head-mounted powered air purifying respirator
Name of the productComplete Versaflo (Tm) kit
Series of productsVersaflo (Tm) TR-300
Product codeRVTR300HKL
Approved/CertifiedMeets NIOSH
Manufacturer3M
Country of originUnited State of America
ReusableReusable with prior hygienic measurement
Battery typeHigh-capacity Lithium-ion rechargeable battery
Battery life8 to 12 hours
Protection factorProtection factor of 25
Protection against gases and vaporsOily and not oily particles
Cartridge color codeMagenta
Faceseal membraneWith faceseal
Cartridge or Filter IncludedHEPA filter include
Respirator StylePowered air purifying respirator
Facepiece typeHead cover with integrated facial membrane seal
Mounting typeWaistband installation
Versaflo (Tm) motorTR-300+ Motor
Type of hoseCorrugated flexible and lightweight material for greater comfort ans less fatigue
Hose materialPolyurethane
Hose length20 5/8 in / 52.5 cm when compressed, 33 3/8 in /85 cm when stretched
Type of connectionBack installation
Facial partS-Series hood RS133L
Facial part MaterialThe facepiece consists of a woven and non-woven polypropylene layered membrane and a visor of laird plastic (PETG)
Compatibility of the facial part3M ™ Power Air Purifying Respirator (PAPR) and Supplied Air (SA) respirator system
Visor tintTransparent
MaterialSee items separately
WashableWipe with a damp cloth, do not immerse in water
Height (in/cm)10 in / 25.4 cm
Length (in/cm)22 in / 55.88 cm
Width (in/cm)14 in / 35.56 cm
Weight (lb/kg)11 lb / 5 Kg
ColorWhite/Grey/Black
Sold byUnit
Another packaging available44 units per pallet
Shipping restrictionDo not ship by air freight
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Reviews

No customer reviews for the moment.

Write a review
3M complete Versaflo powered air purifying respirator (PAPR) kit for pharmaceutical and health facilities. Head cover facepiece.

3M complete Versaflo powered air purifying respirator (PAPR) kit for pharmaceutical and health facilities. Head cover facepiece.

Accessories

30 other products in the same category: