Pair of visor clips 3M Versaflo S-952

Pair of visor clips 3M Versaflo S-952

3M manufacturer code: 7100077600, model S-952

This item is not kept in stock. Please allow 31 days for delivery.

The 3M Versaflo S-952 clip pair renews visor fasteners on S-950 suspension. It combines a left component and a right component so the matching assembly pair can be ordered rather than an unspecified fastener. During care of S-series hoods used for material handling or general maintenance, these small parts support visor retention on its frame. Replacement remains a maintenance operation on the existing system without adding standalone respiratory protection.

Features and function of the clips

• Pair consists of one left clip and one right clip.
• Visor fasteners are intended for S-950 suspension.
• Replacement parts serve the S-series hood support.
• The clip pair is grey.
• Order covers fasteners only, without a hood or suspension included.

Compatibility and system integration

S-952 clips correspond to S-950 suspension. Check this identification before replacing visor fasteners. The clips provide support retention and replace neither the visor, hood nor other respiratory components.

Applications in suspension maintenance

In general maintenance or material handling in marine settings, these clips support servicing of S-950 suspension. At a respiratory equipment maintenance station, identify the left and right fasteners before preparing hood reassembly. The clips do not change the system's permitted uses.

Installing the visor fasteners

Identify the left and right sides, then follow S-950 suspension replacement instructions. Check attachment areas before fitting new parts. Verify visor positioning and retention after assembly before resuming complete system checks.

Clip specific limitations

These parts do not filter air and carry no standalone respiratory certification. Do not use them to improvise a fastener on another support. Mechanical retention alone does not establish system compatibility.

Care, inspection and replacement

Examine the clips and visor attachment points during suspension inspection. If a fastener is deteriorated or no longer holds the visor as intended, replace it according to instructions. Check retention after reassembly and before return to service. Follow the support instructions for cleaning or storing the equipped suspension and keep spare parts clean.

FAQ: the S-952 visor clip pair

Does the order include both sides?

Yes. One pair includes a left clip and a right clip.

Which suspension receives these clips?

Compatibility is with S-950 suspension. Check the support before ordering or fitting the pair.

Is a new visor included?

No. The contents are the S-952 clip pair. The visor, suspension and hood are not included.

Do the clips improve filtration?

No. They provide fastening on the suspension. Respiratory protection depends on the complete system and its condition.

What should be checked after replacement?

Check visor positioning and retention according to the suspension instructions before returning the system to service.

Complementary suggestions

For a technician replacing visor clips at the care station, plan ambidextrous inspector gloves (G120) for parts preparation. Clear bifocal Virtua Max glasses (YA11514) support checks outside the hood. The mask (R8233) with Cool Flow valve is selected for a separate respiratory task under the workstation program rather than layered with the system. Fluorescent orange straps (VV23) and a tool free manhole barrier (EPTBB) complete movement and maintenance access arrangements.

To service the support, the adjustment cover (RS955) completes replacements for the S-950 suspension receiving these clips. The inner collar (RS855) and inner shroud (RS857) assemblies include this suspension; the bag (RS807) renews hoods used with the S-857 assembly. For another textile on reusable suspension, the painter (RS757) assembly is a separate configuration. Select the assembly and its parts according to the work; clips are not filtering components.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.